物理老化无规聚苯乙烯屈服机理的研究

利用机械拉伸、示差扫描量热(DSC)以及溶剂溶胀等方法研究了物理老化后的无规聚苯乙烯(α-PS)的应力屈服行为,并从凝聚缠结的观点对实验结果进行了解释.实验结果表明,经物理老化后的α-PS在拉伸过程中出现应力屈服峰实质上是逐步打开凝聚缠结的过程.凝聚缠结是聚合物非晶相在物理老化过程中相邻的两三条链的局部链段由于范德华吸引力的作用形成的一种有序结构,其作用能很弱,升温至T_g附近,机械拉伸至屈服点以及溶胀剂都可将其完全破坏.     

Two‐Step Oxidation Synthesis of Sulfur with a Red Aggregation‐Induced Emission

Sulfur is not normally considered a light‐emitting material, even though there have been reports of a dim luminescence of this compound in the blue‐to‐green spectral region. Now, it is shown how to make red‐emissive sulfur by a two‐step oxidation approach using elemental sulfur and Na₂S as starting materials, with a high photoluminescence quantum yield of 7.2 %. Polysulfide is formed first and is partially transformed into Na₂S₂O₃ in the first step, and then turns back to elemental S in the second step. The elevated temperature and relatively oxygen‐deficient environment during the second step transforms Na₂S₂O₃ into Na₂SO₃ incorporated with oxygen vacancies, thus resulting in the formation of a solid‐state powder consisting of elemental S embedded in Na₂SO₃. It shows aggregation‐induced emission properties, attributed to the influence of oxygen vacancies on the emission dynamics of sulfur by providing additional lower energy states that facilitate the radiative relaxation of excitons.     

Gypensapogenin H from hydrolyzate of total Gynostemma pentaphyllum saponins induces apoptosis in human breast carcinoma cells

Abstract

Gypensapogenin H (Gyp H) is a novel dammarane-type triterpene, isolated from hydrolyzate of total saponins from Gynostemma pentaphyllum. Our previous work demonstrated that Gyp H exhibited potent growth inhibitory effects on tumor cells. It significantly inhibited the growth of human breast cancer cells (MDA-MB-231), while having low toxicity to normal human breast epithelial cells, MCF-10a. Further mechanistic study demonstrated that Gyp H decreased survival, inhibited proliferation, migration, induced apoptosis and led to cell cycle arrest. For the MDA-MB-231 cell lines, Gyp H increased expression of P21, Bax and cytochrome c, induced PARP cleavage and activated caspases. Gyp H also reduced expression of CDK2/4, CyclinD1, E2F1 and Bcl2, which associated with the cell cycle arrest. Thus, our finding may be useful for understanding the mechanism of action of Gyp H on breast cancer cells and suggest that Gyp H would be a leading agent for the treatment of breast cancer.     

Mesoporous carbon material as cathode for high performance lithium-ion capacitor

The mesoporous carbon material with large pore volume and high surface area by a simple situ MgO template method is synthesized, which is utilized as cathode to assemble a high performance lithium ion capacitor.     

Ultrathin Alternating Copolymer Nanotubes with Readily Tunable Surface Functionalities

Well‐defined ultrathin nanotubes (30 nm in diameter and of micrometer‐scale length) were generated through the self‐assembly of a novel alternative copolymer synthesized using an epoxy–thiol click‐chemistry reaction. The self‐assembly mechanism was investigated both by experiments and using dissipative particle dynamics (DPD) simulations. The obtained nanotubes can be readily functionalized with carboxy groups, amino groups, peptides, or other groups by simple modular click copolymerization.     

三种改性方法对纳米ZnO催化剂粉体的光催化性能的影响

以SnCl4·5H2O、ZnNO3·6H2O、HCl、NaOH、FeCl3·6H2O为原料,采用共沉淀法制备Fe掺杂纳米ZnO、纳米ZnO/SnO2和Fe掺杂纳米ZnO/SnO2三种复合催化剂粉体,以降解甲基橙溶液反应为模型,研究了不同比例的ZnO/SnO2复合、Fe元素掺杂量以及SnO2复合Fe元素掺杂同时作用对纳米ZnO粉体光催化活性的影响,采用X射线衍射(XRD)测试方法对不同量Fe元素掺杂纳米ZnO粉体进行了表征.采用透射电镜对三种改性方法ZnO粉体进行表征.结果表明:随着ZnO/SnO2的物质的量比增加,ZnO/SnO2复合光催化剂的催化活性先增加,然后降低;随着Fe掺杂量的增加,纳米ZnO粉体的光催化活性先增加,然后降低.三种改性方法都能提高纳米ZnO粉体的光催化活性,其中Fe元素掺杂以及SnO2复合改性纳米ZnO粉体的光催化效果最好,物相为ZnO和SnO2,颗粒尺寸为15 ～20 nm,分散性好,比表面积为68.7m2/g.     

基于贝叶斯参数优化的无模型自适应硅单晶直径控制

直拉硅单晶的生长过程涉及多场多相耦合与复杂的物理化学变化,其中工艺参数的波动是导致晶体直径不均匀的重要原因,如何实现工艺参数的控制以获得理想的、均匀的晶体直径具有重要的研究意义。本文分析现有控制方法存在不稳定以及控制效果不佳的问题后,提出基于贝叶斯参数优化的无模型自适应控制模型来控制硅单晶生长过程中的晶体直径。首先以坩埚上升速度与加热器的功率作为控制输入参数,晶体直径作为输出,搭建无模型自适应控制模型,并分析算法的稳定性。其次将控制模型进行仿真实验,发现硅单晶直径控制模型中不同的超参数设定会影响控制过程的迭代次数以及控制效果。最后,利用贝叶斯优化超参数的取值范围,并进行最终的仿真实验,结果表明,经贝叶斯参数优化后的控制模型计算快、迭代次数少,输出的晶体直径稳定,同时将生长工艺参数控制在实际生产要求范围内。因此,基于贝叶斯参数优化的无模型自适应控制实现了硅单晶直径均匀稳定的有效控制,具有结合工程背景的实际应用前景。     

薄壁件加工系统动态响应分析

薄壁件在铣削加工中容易产生共振或变形,直接影响加工稳定性及加工精度。采用主轴-刀具-工件整体铣削系统连续梁模型,系统研究在动态铣削力作用下,刀具端部与工件端部的动态响应之间的相互影响关系以及对整体系统动态响应影响较大的薄壁件尺寸。结果表明,工件横截面高度对系统共振的影响较为明显,当高度尺寸较小时,工件的低频共振会通过动态铣削力直接反映到刀具端部的振动频响上。工件横截面底边宽度尺寸的增大虽然对共振频率的改变不太明显,但会导致激发出来的刀具共振幅度出现明显降低。研究成果可以为薄壁件铣削加工系统的稳定性控制提供理论基础。     

Flexible Liquid Crystal Polymer Technologies from Microwave to Terahertz Frequencies

With the emergence of fifth-generation (5G) cellular networks, millimeter-wave (mmW) and terahertz (THz) frequencies have attracted ever-growing interest for advanced wireless applications. The traditional printed circuit board materials have become uncompetitive at such high frequencies due to their high dielectric loss and large water absorption rates. As a promising high-frequency alternative, liquid crystal polymers (LCPs) have been widely investigated for use in circuit devices, chip integration, and module packaging over the last decade due to their low loss tangent up to 1.8 THz and good hermeticity. The previous review articles have summarized the chemical properties of LCP films, flexible LCP antennas, and LCP-based antenna-in-package and system-in-package technologies for 5G applications, although these articles did not discuss synthetic LCP technologies. In addition to wireless applications, the attractive mechanical, chemical, and thermal properties of LCP films enable interesting applications in micro-electro-mechanical systems (MEMS), biomedical electronics, and microfluidics, which have not been summarized to date. Here, a comprehensive review of flexible LCP technologies covering electric circuits, antennas, integration and packaging technologies, front-end modules, MEMS, biomedical devices, and microfluidics from microwave to THz frequencies is presented for the first time, which gives a broad introduction for those outside or just entering the field and provides perspective and breadth for those who are well established in the field.     

溶剂比对Mn-ZnO复合纳米线形貌及吸附脱硫研究

采用水热法合成了Mn-ZnO复合纳米线,通过改变溶剂比来考察其对Mn-ZnO形貌的影响,并用等体积浸渍法负载金属Ni,制备反应吸附脱硫剂,以正庚烷/噻吩为模拟油并在固定床反应器装置上评价反应吸附脱硫性能.通过XRD、BET、SEM等方法对该催化剂进行表征;研究表明:溶剂比不同可导致Mn-ZnO复合物形貌的不同,从而影响脱硫性能.以乙醇溶液为溶剂制备的脱硫催化剂脱硫率可达99;左右,并且具有良好的稳定性.