IMMOBILIZATION OF POTENTIALLY BIOACTIVE MOIETIES ONTO POLYETHER WITH POLY(ETHYLENE GLYCOL)-SULFONATE SPACER

A new reactive graft copolymer, poly(tetramthylene glycol) - graft-w-propyl sodiumsulfonate-poly(ethylene glycol) (PTMG-g-PEG-CH_2CH_2CH_2SO_3~-Na~+), was synthesizedby the cationic polymerization of a-w-bifunctional PEG macromonomer (O?CH_2—PEG——CH_2 CH_2 CH_2 SO_3 Na) and THF. The obtained copolymer exhibits the expected structureas indicated by the result of characterization. Two amino acids (L-arginine, L-tyrosine)were covalently attached to the copolymer after converting the sulfonate group to sulfonylchloride. So the new reactive graft copolymer (PTMG-g-PEG-CH_2CH_2CH_2SO_3~-Na~+) isexpected to be very useful in attachment of potentially bioactive moieties to polymer viaa hydrophilic PEG spacer.     

Preparation, phase transformation and photocatalytic activities of cerium-doped mesoporous titania nanoparticles

Cerium-doped mesoporous TiO₂ nanoparticles with high surface area and thermal stable anatase wall were synthesized via hydrothermal process in a cetyltrimethylammonium bromide (CTAB)/Ti(SO₄)₂/Ce(NO₃)₄/H₂O system. The obtained materials were characterized by XRD, FESEM, HRTEM, FTIR spectroscopy, nitrogen adsorption and DRS spectra. Experimental results indicated that the doping of cerium not only increased the surface area of mesoporous TiO₂ nanoparticles, but also inhibited the mesopores collapse and the anatase-to-rutile phase transformation. Moreover, the undoped, doped anatase mesoporous nanoparticles exhibit higher photocatalytic activity than commercial photocatalyst (Degussa, P25), but the maximum photodegradation rate corresponds to the undoped mesoporous TiO₂ nanoparticles. The lower photocatalytic activities of cerium-doped samples compared with undoped one may be ascribed to that the doped cerium partially blocks titania's surface sites available for the photodegradation and absorption of Rhodamine B (RB).     

16-脱氢孕烯醇酮醋酸酯的环境友好合成法

Instead of environmentally toxic chromium oxidant, singlet oxygen generated photcchemically was used as environmentally friendly and benign oxidizing agent to accomplish the transformation of pseudodiosgenin diacetate to diosone efficiently in a low toxic and less expensive solvent acetone. Accordingly 16-dehydropregnenolone acetate(16-DPA), an important intermediate for preparation of steroidal drugs, was prepared in good yield (75%) when photoreaction was run in acetone/acetic anhydride/pyridine system. The mild reaction condition as well as simple and environmentally friendly process made the method commercially viable and important for production of 16-DPA in industrial scale.     

Sensitive Voltammetric Response of p‐Nitroaniline on Single‐Wall Carbon Nanotube‐Ionic Liquid Gel Modified Glassy Carbon Electrodes

An ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium hexafluorophosphate, BMIMPF₆)‐single‐walled carbon nanotube (SWNT) gel modified glassy carbon electrode (BMIMPF₆‐SWNT/GCE) is fabricated. At it the voltammetric behavior and determination of p‐nitroaniline (PNA) is explored. PNA can exhibit a sensitive cathodic peak at ?0.70 V (vs. SCE) in pH 7.0 phosphate buffer solution on the electrode, resulting from the irreversible reduction of PNA. Under the optimized conditions, the peak current is linear to PNA concentration over the range of 1.0×10^?8–7.0×10^?6 M, and the detection limit is 8.0×10^?9 M. The electrode can be regenerated by successive potential scan in a blank solution for about 5 times and exhibits good reproducibility. Meanwhile, the feasibility to determine other nitroaromatic compounds (NACs) with the modified electrode is also tested. It is found that the NACs studied (i.e., p‐nitroaniline, p‐nitrophenol, o‐nitrophenol, m‐nitrophenol, p‐nitrobenzoic acid, and nitrobenzene) can all cause sensitive cathodic peaks under the conditions, but their peak potentials and peak currents are different to some extent. Their peak currents and concentrations show linear relationships in concentration ranges with about 3 orders of magnitude. The detection limits are 8.0×10^?9 M for p‐nitroaniline, 2.0×10^?9 M for p‐nitrophenol, 5.0×10^?9 M for o‐nitrophenol, 5.0×10^?9 M for m‐nitrophenol, 2.0×10^?8 M for p‐nitrobenzoic acid and 8.0×10^?9 M for nitrobenzene respectively. The BMIMPF₆‐SWNT/GCE is applied to the determination of NACs in lake water.     

镀金和碳纳米管修饰金电极上吸附态葡萄糖氧化酶比活性的EQCM研究

采用石英晶体微天平(EQCM)技术监测了裸金电极、镀金和碳纳米管修饰金电极上葡萄糖氧化酶(GOD)的吸附过程. 通过EQCM测量吸附固定的GOD质量, 并实时检测酶反应产物H2O2的氧化电量, 求算了各表面上吸附态GOD的比活性(ESAi). 结果表明, 各表面上均可吸附一定的GOD, 且吸附态GOD均有一定的酶活性; 修饰CNTs可增大酶吸附量和酶电极对葡萄糖的响应电流, 但ESAi随CNTs修饰量的增大而降低; Au电极上电镀金后, 酶吸附量和酶电极对葡萄糖的响应电流亦增大, 但ESAi与裸金电极上的基本一致.     

噁二唑肟醚取代的均三唑水杨醛席夫碱衍生物的合成及抗菌活性

均-三唑;噁二唑;肟醚;席夫碱;合成;抗菌活性     

Synthesis of Novel Nucleoside Analog （3R）-2,3-Dideoxy-3-（N-hydroxy-N-methylamino）-L-arabinofuranosyl Uracil

The synthesis of novel nucleoside analog (3R)-2,3-dideoxy-3-(N-hydroxy-N-methylamino)-L-arabinofuranosyl uracil was studied. A twelve-step synthetic route, started from L-ascorbic acid, was designed, and the final product was obtained in 20.8% yield.     

Catalytic Enantioselective Reduction of Prochiral Ketones with Chiral Ferrocenyl Amino Alcohols

The asymmetric reduction of prochiral ketones was catalyzed by a class of recoverable and highly stable chiral ferrocenyl amino alcohols derived from natural amino acids to yield optically active secondary alcohols in high chemical yields and moderate to good enantiomeric excesses.     

2MgO·2B2O3·MgCl2·14H2O-7.8%H3BO3-H2O体系多温相关系研究

研究了2MgO·2B2O3·MgCl2·14H20在不同温度下的7.8%H3BO3水溶液中的相转化产物及其溶解度.IR,XRD,TG及化学分析表明,相转化产物在0～22℃范围内为MgO·2B2O3·9H20;22～68℃为MgO·2B2O3·7.5H20;68～95℃为MgO·2B2O3·7H20;95～98.8℃为MgO·2B2O3·5H20;100～110℃为MgO·B2O3·3H20;110～120℃为2MgO·B2O3·2H20;120～170℃为2MgO·B2O3·1.5H20;170～200℃为2MgO·B2O3·H20.提出了相转化反应原理.     

氧化-还原低温引发甲基丙烯酸甲酯/丙烯酸丁酯超浓乳液聚合研究

以乳化剂十二烷基硫酸钠 (SDS)和共乳化剂十六烷醇 (HD)作为复合乳化体系 ,过氧化二苯甲酰(BPO)和N ,N 二甲基苯胺 (DMA)作为氧化还原引发体系 ,甲基丙烯酸甲酯 丙烯酸丁酯 (MMA BA)作为混合单体 ,制备了分散相占 83 %以上的稳定的超浓乳液 ,然后在低温下引发聚合 .探讨了引发剂浓度、氧化剂与还原剂的摩尔比、乳化剂的浓度、液膜增强剂的种类、聚合温度等因素对聚合稳定性和聚合速率的影响 ,测定并计算得到了聚合速率的公式 ;用激光散射粒度分布仪测定了聚合物乳胶粒子的大小及粒径分布 ,用透射电子显微镜观察了聚合物乳胶粒的形态 ,讨论了乳化剂浓度、聚合温度等对乳胶粒形态、大小的影响