Two Discrete Cu-Complexes Constructed from a Multidentate N-Containing Dinucleating Ligand

Two comparable discrete complexes [CuⅡ(CH3CN)2L2]·2(ClO4) 1 and [CuI2I2L2]·(DMF)2 2 were successfully synthesized by the reaction of CuⅡ and CuⅠ salts with a novel dinucleating ligand 2,5-bis(3-pyridinylmethylthio)-1,3,4-thiadiazole)(L),respectively.Complex 1 presents a single nuclear structure while 2 has a dimeric structure where two CuI ions are doubly bridged by halide ions in a μ2-fashion.Both discrete molecules were outspreaded into a one-dimensional supramolecular chain via aromatic interactions such as C-H…π and π…π interactions.     

Crystal Structure of a Mn(Ⅱ) Coordination Polymer:[Mn(TP)(TBZH)_(2n)(TBZH=Thiabendazole,TP=Terephthalic Acid)

The structure of a manganese(Ⅱ) polymer,[Mn(TP)(TBZH)]2n 1(TBZH=thiabendazole,TP=terephthalic acid),has been determined by X-ray crystallography and characterized by elemental analysis,IR spectrum and thermogravimetric analysis.It crystallizes in the orthorhombic system,space group Pbcn with a=12.7813(12),b=10.7544(10),c=20.1270(19) ,V=2766.6(4)3,Z=8,C14H9Mn0.50N3O2S,Mr=310.77,Dc=1.492g/cm3,F(000)=1268,μ=0.674 mm-1 and S=1.064.The 1-D chain architecture of 1 is constructed from terephthalic acid and manganese atoms.Hydrogen bonds and aryl ring π-π stacking interactions in 1 contribute to form a 3-D supramo-lecular structure.     

Synthesis and Crystal Structure of a New Coordination Polymer: {[AgL]ClO_4}_n(L = 2,5-Bis(3-pyridinylmethylthio)-l,3,4-thiadiazole)

The title complex {[AgL]ClO4}n(L=2,5-bis(3-pyridinylmethylthio)-1,3,4-thiadiazole) was synthesized by the reaction of Ag(I) salt and a novel flexible ligand L.Its structure was determined by X-ray crystallography with the following data:monoclinic,space group P21/n,a=16.5068(13),b=7.6548(4),c=16.5521(13),β=115.119(3)o,V=1893.7(2)3,Z=4,Dc=1.893 g/cm3,μ=1.565 mm-1,F(000)=1072,C14H12AgClN4O4S3,Mr=539.78,T=293(2) K,S=1.067,the final R=0.0342 and wR=0.0870.The silver ion in the complex is in a trigonal coordin...     

Crystal Structure of Catena-poly-[2,2'-bisbenzimidazole Mn(Ⅱ)-μ-Benzene-1,3-dicarboxylato]

The title complex,[(BBI)Mn(BDC)]n 1(BBI = 2,2'-bisbenzimidazole(C14H10N4),BDC=benzene-1,3-dicarboxylate dianion(C8H10O4)),crystallizes in the monoclinic system,space group C2/c,with a=17.822(8),b=16.181(7),c=13.355(6),β=92.112(5)°,V=3848.67(304)3,Z=8,C22H14MnN4O4,Mr=453.31,Dc=1.565 g/cm3,F(000)=1848,μ=0.725 mm-1,S=1.000,the final R=0.0310 and wR=0.0589.1 contains hydrogen bonds and π-π stacking interactions between the neighboring aryl-ring of BBI's,which helps to form a three-dimensional crystal structure.     

有机化合物的氧化溴化研究进展

综述了几类在氧化剂存在下的羰基α位、芳环、烯烃双键、烷基苯苄位及烷烃上的氧化溴化反应。氧化溴化体系主要有Br-/H2O2和Br-/BrO3-体系。总结了不同反应条件对反应收率的影响,并展望了该领域的研究前景。     

荧光法快速检测有机磷农药残留总量

在pH4.60的B-R缓冲溶液中,中性红(NR)与一定浓度的十二烷基苯磺酸钠(SDBS)发生荧光增强反应,在该体系中加入有机磷农药后,在激发波长560 nm,发射波长604 nm处体系的荧光强度明显降低,且降低程度与有机磷农药的加入量呈良好的线性关系,其线性范围和检出限分别为0.024~0.40 mg/L,0.014 mg/L。据此建立了测定有机磷农药残留总量的新方法。方法已用于面粉和土壤中有机磷农药残留总量的检测,回收率在92.0%~100.5%之间,RSD在1.1~1.9%之间。     

一种离子导电PET纤维的制备

通过含有KI的聚乙二醇(PEG)与PET熔融共混制得导电聚合物,其在常温下电阻率可达到105Ω.cm左右,电阻率随温度升高而降低,具有离子导电的特性.通过FTIR、DSC和偏光显微镜研究其形态结构和热性能,结果表明该导电聚合物中PEG和PET主要是物理共混,晶区不相容,非晶区具有部分相容性,熔融降温发生相分离,KI/PEG形成连续的一相.该导电聚合物作为导电母粒与PET切片以不同的配比共混纺丝制备出颜色较浅的导电PET纤维.当纤维中导电母粒的质量分数超过10 wt%时,制得的导电纤维的电阻率为106Ω.cm左右,具有较好的耐水洗性.该导电纤维具有双连续相结构,连续的KI/PEG导电相因形成导电通路使纤维具有导电性能;连续的PET相使纤维基本保持PET纤维的力学性能.     

胆固醇修饰富勒烯/γ-环糊精包结复合物的生物活性

采用Bingel-Hirsch反应合成了胆固醇修饰的富勒烯(CHL-C60), 通过核磁共振(NMR)、质谱(MS)、元素分析对CHL-C60的化学结构进行了表征. γ-环糊精(γ-CD)对甾环具有较强的包结能力, 能够与CHL-C60形成包结复合物(CHL-C60/γ-CD), 从而有效提高CHL-C60的水溶性. 紫外-可见吸收光谱和荧光光谱研究结果表明, CHL-C60能够从γ-CD的疏水空腔中解离出来, 与人血清白蛋白(HSA)及牛血清白蛋白(BSA)形成稳定的复合体, 其结合常数分别为5.73×104和7.05×104 L·moL-1. 无氧条件下, CHL-C60/γ-CD通过光诱导电子转移作用断裂pBR322质粒脱氧核糖核酸(DNA), 其效率可达60.5%.     

尿素在ZnO(1010)表面的吸附

运用VASP(Vienna ab-initio simulation package),采用基于密度泛函理论(DFT)的第一原理计算,研究了尿素在ZnO(101軈0)表面的吸附行为.计算结果表明:尿素分子在ZnO(101軈0)表面主要发生分子吸附,稳定的吸附产物通过尿素分子中的氮原子或氧原子与表面锌原子之间的键合作用而形成,吸附能分别为-1.48和-1.41eV;表面吸附的尿素分子也可以发生解离,生成表面吸附的异氰酸根、氨气和一个表面羟基,吸附能为-1.66eV.     

NiCo_2O_4对H_2O_2在碱性溶液中电化学还原反应的催化行为(英文)

利用溶胶-凝胶法合成纳米NiCo2O4,并利用X射线衍射和透射电镜分析其结构和表面形貌.结果表明NiCo2O4具有尖晶石结构,平均粒径约为15 nm.利用电势线性扫描和恒电势法测定了其对H2O2在碱性溶液中电化学还原反应的催化性能.发现NiCo2O4对H2O2电化学还原具有高的催化活性和稳定性,在H2O2浓度低于0.6 mol.L-1时,其电化学还原反应主要通过直接还原途径进行.以NiCo2O4为阴极催化剂的Al-H2O2半燃料电池在室温下的开路电压达1.6 V;在1.0 mol.L-1 H2O2溶液中,峰值功率密度达209 mW.cm-2,此时电流密度为220mA.cm-2.