Forced-air precooling of spherical foods in bulk: A parametric study

In this paper, a mathematical model for forced-air precooling of spherical food products in bulk is developed. The foods are arranged in horizontal layers stacked one above the other to form a rectangular parallelepiped with a vertical gap in between the product layers. The foods are cooled by chilled air blown along the height of the package. The governing equations for the conduction heat transfer in the foods, simultaneous heat and mass transfer at the food-air interface and in the air stream are solved numerically using finite-difference methods. A comprehensive numerical study is performed by varying the process parameters over a wide range. Typical results showing the variation of moist air properties along the height of the package and the effect of each parameter on the process time are presented. The ranges of parameters for advantageous operation of the precooling system are identified. Correlations are obtained for the process time based on the product center and mass-averaged temperatures in terms of process parameters.     

Positron annihilation in polycrystalline metals

The empirical relation θ _p ⁶ /I _p=aK (where θ _p is the limiting angle of the parabolic component in the angular distributions of annihilation photons in metals, I _p is the integrated contribution of this component, K=1, 2, 3, ... is an integer, and a is a constant independent of the type of metal) observed earlier has been tested on magnesium, aluminum, copper, zinc, lead, and bismuth samples. The validity of this relation has been substantiated. The value of the dimensionless constant a has been determined and was found to coincide within experimental error with the result obtained in previous measurements. It is shown that the value of K for the same metal but for different samples may be different. It is conjectured that this may be due to different defect concentrations in samples. Fiz. Tverd. Tela (St. Petersburg) 40, 600–602 (April 1998)     

The multiple-scale wave equation

An analytic and numerical study of the behavior of the linear nonhomogeneous wave equation of the form ε²u_tt = Δu + tf with high wave speed (ε 1) is carried out. This study was initially motivated by meteorological observations which have indicated the presence of large spatial scale gravity waves in the neighborhood of a number of summer and winter storms, mainly from visible images of ripples in clouds in satellite photos. There is a question as to whether the presence of these waves is caused by the nearby storms. Since the linear wave equation is an approximation to the full system describing pressure waves in the atmosphere, yet is considerably more tractable, we have chosen to analyze the behavior of the linear nonhomogeneous wave equation with high wave speed. The analysis is shown to be valid in one, two, and three space dimensions. Partly because of the high wave speed, the solution is known to consist of behavior which changes on two different time scales, one rapid and one slow. Additionally, because of the presence of the nonhomogeneous forcing term tf, we show that there is a component of the solution which will vary only on a very large spatial scale. Since even the linearized wave equation can give rise to persistent large spatial scale waves under the right conditions, the implication is that certain storms could be responsible for the generation of large-scale waves. Numerical simulations in one and two dimensions confirm analytic results.     

Experimental Determination of Four-Time Stimulated Echoes in Liquids, Colloidal Suspensions, and Crystals

Four-time stimulated echo experiments have been used to monitor the temporal evolution of the reorientation rates of deuterated molecules or colloidal suspensions. We present extended phase cycles for this seven-pulse experiment. In order to test its performance three vastly different materials are chosen. These include a crystal in which the molecules carry out well-defined 180° flips and a supercooled liquid characterized by a distribution of jump angles centered around 10°. As an example for rotational diffusion, data on a concentrated suspension of polystyrene spheres in a viscous medium are presented.     

Time-harmonic response of a vertical crack in plates

A technique for the characterization of an interior crack perpendicular to the surface of the plates is presented. A time-harmonic line load is applied on the upper surface of the plate. The scattered displacement field is calculated by using the strip element method. It is found that there are additional superimposed oscillations in the curve of the absolute values of the displacement in the region between the load and the crack. The mean value of the peaks of the additional oscillations increases with the crack length, and is less dependent on the distance from the load to the crack. The crack position is determined from the displacement distribution curve and the crack length is determined from the mean value of the peaks of the additional oscillations. Approximate polynomial formula of degree four for predicting the length of interior vertical cracks in isotropic homogeneous plates is also proposed. Numerical examples are given to demonstrate the present technique.     

On the stability of retrial queues

We consider the following Type of problems. Calls arrive at a queue of capacity K (which is called the primary queue), and attempt to get served by a single server. If upon arrival, the queue is full and the server is busy, the new arriving call moves into an infinite capacity orbit, from which it makes new attempts to reach the primary queue, until it finds it non-full (or it finds the server idle). If the queue is not full upon arrival, then the call (customer) waits in line, and will be served according to the FIFO order. If λ is the arrival rate (average number per time unit) of calls and μ is one over the expected service time in the facility, it is well known that μ > λ is not always sufficient for stability. The aim of this paper is to provide general conditions under which it is a sufficient condition. In particular, (i) we derive conditions for Harris ergodicity and obtain bounds for the rate of convergence to the steady state and large deviations results, in the case that the inter-arrival times, retrial times and service times are independent i.i.d. sequences and the retrial times are exponentially distributed; (ii) we establish conditions for strong coupling convergence to a stationary regime when either service times are general stationary ergodic (no independence assumption), and inter-arrival and retrial times are i.i.d. exponentially distributed; or when inter-arrival times are general stationary ergodic, and service and retrial times are i.i.d. exponentially distributed; (iii) we obtain conditions for the existence of uniform exponential bounds of the queue length process under some rather broad conditions on the retrial process. We finally present conditions for boundedness in distribution for the case of nonpatient (or non persistent) customers. This revised version was published online in June 2006 with corrections to the Cover Date.     

On finite-dimensional approximation of solutions of ill-posed problems

We show that the modified method for finite-dimensional approximation of solutions of Fredholm integral equations of the first kind presented in this paper is more economical than traditional methods for finite-dimensional approximation. Institute of Mathematies, Ukrainian Academy of Science, Kiev. Translated from Ukrainskii Matematicheskii Zhurnal, Vol. 49, No. 2, pp. 289–295, February, 1997.     

Membrane introduction mass spectrometry

An overview of membrane introduction mass spectrometry (MIMS) is presented and comparisons are made with other direct sample introduction techniques. Special attention is given to the unique advantages and the limitations of newer variants on the MIMS technique, including affinity MIMS, reverse-phase and trap MIMS. The salient features of the interfaces used in MIMS are summarized and the various membrane materials commonly used are delineated. The applicability of MIMS is illustrated via discussion of

1. (i) bioreactor monitoring (represented by yeast fermentation),

2. (ii) environmental monitoring (illustrated by analysis of contaminated ground water samples) and

3. (iii) on-line chemical reaction monitoring (exemplified by the photolysis of aryl esters).

The applicability of MIMS to the analysis of environmental samples, including complex mixtures in water, air and soil, is noted.     

Superradiance of polaritons in finite one-dimensional crystals of increasing length: Passage from a dimer to an infinite crystal

Solutions of the dispersion equations for polariton states in finite one-dimensional crystals of arbitrary length are obtained. The appearance and evolution of the radiative and nonradiative polariton branches are traced as the length varies from two monomers to limiting values, above which the spectrum no longer undergoes significant changes. The dependences of the frequencies and radiative widths on the polariton wave vector are found for various orientations of the dipole moment of the quantum transition. The evolution of superradiance as the length of the crystal increases is traced. Some previously unknown significant features of the polariton spectrum are noted particularly the damping of the branch traditionally termed nonradiative as a consequence of emission from the end faces. Fiz. Tverd. Tela (St. Petersburg) 40, 2136–2140 (November 1998)