Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.     

Temperature and junction-type dependency of Andreev reflection in MgB2

We studied the voltage and temperature dependency of the dynamic conductance of normal metal-MgB₂ junctions obtained either with the point-contact technique (with Au and Pt tips) or by making Ag-paint spots on the surface of MgB₂ samples. The fit of the conductance curves with the generalized BTK model gives evidence of pure s-wave gap symmetry. The temperature dependency of the gap, measured in Ag-paint junctions (dirty limit), follows the standard BCS curve with 2Δ/k_BT_c=3.3. In out-of-plane, high-pressure point-contacts we obtained almost ideal Andreev reflection characteristics showing a single small s-wave gap Δ=2.6±0.2 meV (clean limit).     

Semi‐analytical integration of the 8‐node plane element stiffness matrix using symbolic computation

The semi‐analytical integration of an 8‐node plane strain finite element stiffness matrix is presented in this work. The element is assumed to be super‐parametric, having straight sides. Before carrying out the integration, the integral expressions are classified into several groups, thus avoiding duplication of calculations. Symbolic manipulation and integration is used to obtain the basic formulae to evaluate the stiffness matrix. Then, the resulting expressions are postprocessed, optimized, and simplified in order to reduce the computation time. Maple symbolic‐manipulation software was used to generate the closed expressions and to develop the corresponding Fortran code. Comparisons between semi‐analytical integration and numerical integration were made. It was demonstrated that semi‐analytical integration required less CPU time than conventional numerical integration (using Gaussian‐Legendre quadrature) to obtain the stiffness matrix. © 2005 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2006     

Balancing a Rotor with Two Coupled Perfectly Rigid Bodies

The steady motions of a vertical rotor balanced by two coupled perfectly rigid bodies (PRBs) are analyzed for stability. The rotor executes plane-parallel motions. The PRBs can rotate together about the rotor axis and about its transverse axes through equal angles but in opposite directions. It is established that when the mass of the PRBs is much less than that of the rotor and the rotor spins with a superresonant speed, only the basic steady motions, which are those of the best-balanced rotor, are asymptotically stable.     

Finslerian Extension of Lorentz Transformations and First-Order Censorship Theorem

Granted the post-Lorentzian relativistic kinematic transformations are described in the Finslerian framework, the uniformity between the actual light-velocity anisotropy change and the anisotropic deformation of measuring rods can be the reason proper for the null results of the Michelson-Morley-type experiments at the first-order level.     

Co-Segregation Effects on Boundary Migration

We analyze the effect of co-segregation on the mobility of grain boundaries within the framework of the impurity drag theory originally proposed by Cahn and Lücke and Stüwe for an ideal solution. The new derivation extends this model to the case where there are two types of impurities (or three components in the alloy). Since the resultant expression for the boundary mobility is complicated, numerical solutions were obtained for several cases to show how co-segregation affects the boundary mobility. Depending on the relative diffusivities of the two impurities which are both attracted to the boundary, the mobility may either increase or decrease with increasing concentration of one of the impurities. When one of the impurities is attracted to the boundary and the other repelled from the boundary, increasing the concentration of the attractive impurity can lead to a sharp decrease in the boundary mobility.     

Expansion of monomer units in poly(ethylene terephthalate) molecules under conditions of thermal and zero-point atomic vibrations

The temperature dependence of the expansion ?_C of trans conformers of the carbon skeleton of macromolecules in crystallized and amorphous poly(ethylene terephthalate) (PET) due to zero-point and thermal atomic vibrations is investigated by IR spectroscopy. It is found that the thermal expansion coefficient β_C jumpwise increases at the characteristic temperatures T _t and T _b. This increase is associated with the crossover from the quantum to classical statistics of torsional and bending vibration modes. The quantum and classical contributions to the expansion ?_C are determined for each mode. The quantum and classical contributions of the torsional vibrational mode in the amorphous polymer are approximately 1.5 times larger than those in the crystallized polymer. This effect is caused by an increase in the anharmonicity of torsional vibrations in the amorphous polymer.     

Decay and fission of oriented nuclei

The angular distributions of fragments originating from the binary decay of oriented spherical and deformed nuclei are investigated with allowance for correct transformation properties of wave functions under time inversion. It is shown that, as in the case of protonic decay, the adiabatic approximation for collective rotational degrees of freedom of the systems under investigation is inapplicable in describing the angular distributions of fragments of the deep-subbarrier alpha and cluster decays of nuclei. It is demonstrated that this approximation is justified in describing spontaneous and induced low-energy nuclear fission. The dependence of partial fission widths on the orientation of intrinsic axes, spins, and projections of spins and relative orbital angular momenta of fission fragments is analyzed by using the formalism of the unified theory of nuclear reactions and the theory of open Fermi systems. It is shown that the adiabatic approximation leads to the coherent interference between the wave functions for the relative motion of fragments, whereby the universal angular distributions of fission fragments of oriented nuclei is formed. Deviations from the A. Bohr formula are investigated for these distributions.     

Forward-angle yields of 2≤Z≤11 isotopes in the reaction of 18O(35A MeV) with 9Be

A systematic investigation of the forward-angle inclusive yields of 2≤Z≤11 isotopes produced in collisions of ¹⁸O projectile nuclei with a ⁹Be target in the Fermi energy region (35A MeV) is performed. The measurements were based on the use of the COMBAS double achromatic kinematical separator in the spectrometry mode at the Flerov Laboratory of Nuclear Reactions at the Joint Institute for Nuclear Research, FLNR (JINR, Dubna). The velocity, isotopic, and element distributions are presented. There is no unique mechanism that would explain the total set of results obtained in this experiment. A dominant role of low-energy reaction mechanisms is observed. The intensity of secondary beams of halolike nuclei ¹¹Li, ¹²Be, and ¹⁴Be is determined.     

Time delay as a key to apoptosis induction in the p53 network

A feedback mechanism that involves the proteins p53 and mdm2, induces cell death as a controlled response to severe DNA damage. A minimal model for this mechanism demonstrates that the response may be dynamic and connected with the time needed to translate the mdm2 protein. The response takes place if the dissociation constant k between p53 and mdm2 varies from its normal value. Although it is widely believed that it is an increase in k that triggers the response, we show that the experimental behaviour is better described by a decrease in the dissociation constant. The response is quite robust upon changes in the parameters of the system, as required by any control mechanism, except for few weak points, which could be connected with the onset of cancer. Received 8 May 2002 / Received in final form 9 July 2002 Published online 17 September 2002