An AFM, XPS and electrochemical study of molecular electroactive monolayers formed by wet chemistry functionalization of H-terminated Si(1 0 0) with vinylferrocene

Molecular electroactive monolayers have been produced from vinylferrocene (VFC) via light-assisted surface anchoring to H-terminated n- and p-Si(1 0 0) wafers prepared via wet chemistry, in a controlled atmosphere. The resulting Si-C bound hybrids have been characterized by means of XPS and AFM. Their performance as semiconductor functionalized electrodes and their surface composition have been followed by combining electrochemical and XPS measurements on the same samples, before and after use in an electrochemical cell. White-light photoactivated anchoring at short (1 h) exposure times has resulted in a mild route, with a very limited impact on the initial quality of the silicon substrate. In fact, the functionalized Si surface results negligibly oxidized, and the C/Fe atomic ratio is close to the value expected for the pure molecular species. The VFC/Si hybrids can be described as (η⁵-C₅H₅)Fe²⁺(η⁵-C₅H₄)-CH₂-CH₂-Si species, on the basis of XPS results. Electrochemical methods have been applied in order to investigate the role played by a robust, covalent Si-C anchoring mode towards substrate-molecule electronic communication, a crucial issue for a perspective development of molecular electronics devices. The response found from cyclic voltammograms for p-Si(1 0 0) functionalized electrodes, run in the dark and under illumination, has shown that the electron transfer is not limited by the number of charge carriers, confirming the occurrence of electron transfer via the Si valence band. The hybrids have shown a noticeable electrochemical stability and reversibility under cyclic voltammetry (cv), and the trend in peak current intensity vs. the scan rate was linear. The molecule-Si bond is preserved even after thousands of voltammetric cycles, although the surface coverage, evaluated from cv and XPS, decreases in the same sequence. An increasingly larger surface concentration of Fe³⁺ at the expenses of Fe²⁺ redox centers has been found at increasing number of cv’s, experimentally associated with the growth of silicon oxide. Surface SiO⁻ groups from deprotonated silanol termination, induced by the electrochemical treatments, are proposed as the associated counterions for the Fe³⁺ species. They could be responsible for the observed decrease in the electron transfer rate constant with electrode ageing.     

Seminorms and Continuity Modules for Functions Defined on a Segment

We describe in detail fundamental properties of continuity modules of various orders in the spaces L ^p of functions defined on a finite segment. We establish some general estimates of seminorms in terms of continuity modules with the best known constants. An example of application of these results to the best approximations is considered. Bibliography: 32 titles.     

A novel approach to the acoustic characterisation of porous road surfaces

Porous road surfaces offer an effective means of reducing the generation and propagation of noise from road traffic. However, the porosity of these surfaces can deteriorate over time, leading to a reduction in their noise reducing properties. Efficient methods are therefore required for monitoring this performance. Existing techniques for performing in-situ measurements of acoustic absorption are unsuitable for use within the traffic stream. Static measurements using time domain Maximum Length Sequence (MLS) based techniques have been demonstrated to offer advantages over traditional techniques, presenting the opportunity for measurements under dynamic conditions. This paper describes the design of a system for carrying out dynamic MLS-based measurements. Results are presented which demonstrate that stable dynamic measurements can be carried out at speeds of up to 30 km/h.     

Untersuchungen zur Wechselwirkung von gasf?rmigem molekularem Iod mit Silberoberfl?chen mittels XPS und AES

Summary The adsorption of gaseous molecular iodine on clean silver surfaces proceeds in the first stage by dissociative chemisorption. After the formation of half a monolayer of chemisorbed iodine atoms the formation of silver iodide begins, which forms a very regular overlayer on top of the substrate. Both iodine species can be distinguished due to a difference in chemical shift of the M₄N₄, ₅N₄, ₅-Auger transitions. After completion of this overlayer further iodine uptake is slowed down significantly. Above an overlayer thickness of about 10 nm a further progress of the reaction cannot be followed anymore due to the limited information depth of XPS.     

Activity of microemulsion-based nanoparticles at the human bio-nano interface: concentration-dependent effects on thrombosis and hemolysis in whole blood

Background: Although microemulsion-based nanoparticles (MEs) may be useful for drug delivery or scavenging, these benefits must be balanced against potential nanotoxicological effects in biological tissue (bio-nano interface). We investigated the actions of assembled MEs and their individual components at the bio-nano interface of thrombosis and hemolysis in human blood. Methods: Oil-in-water MEs were synthesized using ethylbutyrate, sodium caprylate, and pluronic F-68 (ME4) or F-127 (ME6) in 0.9% NaCl_w/v. The effects of MEs or components on thrombosis were determined using thrombo-elastography, platelet contractile force, clot elastic modulus, and platelet counting. For hemolysis, ME or components were incubated with erythrocytes, centrifuged, and washed for measurement of free hemoglobin by spectroscopy. Results and conclusions: The mean particle diameters (polydispersity index) for ME6 and ME4 were 23.6 ± 2.5 nm (0.362) and 14.0 ± 1.0 nm (0.008), respectively. MEs (0, 0.03, 0.3, 3 mM) markedly reduced the thromboelastograph maximal amplitude in a concentration-dependent manner (49.0 ± 4.2, 39.0 ± 5.6, 15.0 ± 8.7, 3.8 ± 1.3 mm, respectively), an effect highly correlated (r2 = 0.94) with similar changes caused by pluronic surfactants (48.7 ± 10.9, 30.7 ± 15.8, 20.0 ± 11.3, 2.0 ± 0.5) alone. Neither oil nor sodium caprylate alone affected the thromboelastograph. The clot contractile force was reduced by ME (27.3 ± 11.1–6.7 ± 3.4 kdynes/cm², P = 0.02, n = 5) whereas the platelet population not affected (175 ± 28–182 ± 23 10⁶/ml, P = 0.12, n = 6). This data suggests that MEs reduced platelet activity due to associated pluronic surfactants, but caused minimal changes in protein function necessary for coagulation. Although pharmacological concentrations of sodium caprylate caused hemolysis (EC₅₀ = 213 mM), MEs and pluronic surfactants did not disrupt erythrocytes. Knowledge of nanoparticle activity and potential associated nanotoxicity at this bio-nano interface enables rational ME design for in vivo applications.     

Thermal diffusion of envelope solitons on anharmonic atomic chains

We study the motion of envelope solitons on anharmonic atomic chains in the presence of dissipation and thermal fluctuations. We consider the continuum limit of the discrete system and apply an adiabatic perturbation theory which yields a system of stochastic integro-differential equations for the collective variables of the ansatz for the perturbed envelope soliton. We derive the Fokker-Planck equation of this system and search for a statistically equivalent system of Langevin equations, which shares the same Fokker-Planck equation. We undertake an analytical analysis of the Langevin system and derive an expression for the variance of the soliton position Var[x _s ] which predicts a stronger than linear time dependence of Var[x _s ] (superdiffusion). We compare these results with simulations for the discrete system and find they agree well. We refer to recent studies where the diffusion of pulse solitons were found to exhibit a superdiffusive behaviour on longer time scales.Received: 28 June 2004, Published online: 26 November 2004PACS: 05.10.Gg Stochastic analysis methods - 05.45.Yv Solitons - 05.40.-a Fluctuation phenomena, random processes, noise, and Brownian motion - 05.50. + q Lattice theory and statistics     

A representation of the Belavkin equation via Feynman path integrals

 The Belavkin equation, describing the continuous measurement of the position of a quantum particle, is studied. A rigorous representation of its solution by means of an infinite dimensional oscillatory integral (Feynman path integral) defined on the complex Cameron-Martin space is given. Received: 7 January 2002 / Revised version: 20 June 2002 / Published online: 19 December 2002 Mathematics Subject Classification (2000): 81, 81S40, 60H15 Key words or phrases: Belavkin equation – Continuous measurement – Quantum theory – Oscillatory integrals – Feynman path integrals     

Beryllium (boron) clustering quest in relativistic multifragmentation (BECQUEREL Project)

A physical program of irradiation of emulsions in beams of relativistic nuclei named the BECQUEREL Project is reviewed. It is destined to study in detail the processes of relativistic fragmentation of light radioactive and stable nuclei. The expected results would make it possible to answer some topical questions concerning the cluster structure of light nuclei. Owing to the best spatial resolution, the nuclear emulsions would enable one to obtain unique and evident results. The most important irradiations will be performed in the secondary beams of He, Be, B, C, and N radioactive nuclei formed on the basis of JINR Nuclotron beams of stable nuclei. We present results on the charged state topology of relativistic fragmentation of the ¹⁰B nucleus at low energy-momentum transfers as the first step of the research.