Designing and Characterization of Biodegradable Multiblock Poly(L-Lactic Acid)/Polybutadiene Elastomers

A series of poly(L-lactic acid)/polybutadiene (PLA/PB) biodegradable multiblock elastomers was synthesized and characterized. A two-step process to prepare PLA/PB multiblock elastomers was applied. Melt polymerization was used to prepare poly(L-lactic acid) (PLA) terminated with hydroxyl groups and, at the same time, hydroxyl-terminated polybutadiene (HTPB) and 1,6-hexamethylene diisocyanate (HDI) were employed to synthesize diisocyanate-terminated polybutadiene (ITPB). Then, PLA and ITPB were reacted with different PLA/PB weight ratios. Consequently, a series of PLA/PB biodegradable poly(ester-urethane)s with crosslinked chains was obtained. Swelling characteristics and crosslink density of the crosslinked elastomer were investigated. DMA was applied to characterize its thermal properties. The measurement of mechanical properties showed that a PLA/PB elastomer with adjustable mechanical properties was synthesized. Micromorphology, hydrophobicity, and degradability of the material were also characterized.     

Variations in the Concentrations of Cu and Zn and in the Ratio of Cu to Zn in Whole Blood and Hair Samples from Hepatocellular Carcinoma Patients and from Healthy Controls in Taiwan

An atomic absorption spectrophotometer was used to determine concentrations of copper and zinc and the ratio of Cu to Zn in samples of whole blood and hair from hepatocellular carcinoma (HCC) patients (n=51) and from healthy controls (n=50) in Taiwan. Our results indicate that the HCC patients have higher copper concentrations and higher ratios of Cu to Zn than do the healthy controls both in whole blood and hair samples, but only the concentration of copper and the ratio of Cu to Zn in whole blood were significantly different (p<0.001 and p<0.05). Conversely, a lower concentration of zinc was found in whole blood and hair samples of HCC patients. Similarly, only the concentration of zinc in whole blood showed a significant difference (p<0.001). We concluded that the whole blood concentrations of copper and zinc and the ratio of Cu to Zn seemed to have a higher correlation with HCC. Thus, we suggest that a sample of whole blood may be a more suitable diagnostic sample than is a hair sample for HCC.     

Theoretical investigation of the spin-Hamiltonian parameters and optical spectra for the doped Cu2+ in ZnCdO nanopowder

The spin-Hamiltonian (SH) parameters (g factors g_||, g_⊥ and hyperfine structure constants A_||, A_⊥) and d–d transitions for ZnCdO:Cu²⁺ are calculated based on the perturbation formulas for a 3d⁹ ion in tetragonally elongated octahedra. Good agreement between the calculated results (four SH parameters and three optical absorption bands) and the experimental results can be obtained. Since the SH parameters are sensitive to the local structure of a paramagnetic impurity center, the tetragonal distortion (characterized by the relative elongation ratio ρ ≈ 3.5% along the C₄ axis) of the impurity center due to the Jahn–Teller effect is also acquired from the calculations. The negative and positive signs of hyperfine structure constants A_|| and A_⊥ for ZnCdO:Cu²⁺, respectively, are also suggested in the discussions.     

Investigation of the Kinetics of Curing Reaction for the Resin Matrix Polymer Composite Based on Near-Infrared Spectroscopy

Abstract

Near-infrared (NIR) spectroscopy is a rapid and nondestructive method for the simultaneous measurement of different constituents in resin matrix polymer composites. This strategy has been applied in the synthesis of resin matrix polymer composites. In this article, we mainly review the control of curing reaction kinetics of the phenolic, epoxy resin, polyester resin, polyurethane, and other polymer resin based on NIR spectra, which is important to control the quality of the resin matrix polymer composites during synthesis.     

一类反应扩散方程解的渐近性质及其应用

本文讨论问题 ｕｔ＝Ａｕｘｘ＋ｆ（ｘ，ｔ，ｕ）， ｕｘ｜ｘ＝０＝０，ｕｘ｜ｘ＝１＝０， ｕ｜ｔ＝０＝ｕ０（ｘ）。 的解的渐近性质，将参考文献［１］的Ｌ＾２范数估计     

关于自同构作用下的不变元

文章主要讨论了代数（环）、（双）Ｈｏｐｆ代数中自同构作用下不变元素的性质，得到一些新的结果：设Ａ是有限维半单代数，则ＡｕｔＡ作用下的不变元属于中心，并且举出反例说明这个性质不能一般化到有限维代数、有限维半单（双）Ｈｏｐｆ代数．     

快速发光二极管的性能与分析

本文叙述了用于光通信快速、高辐射度GaAs/GaAlAs双异质结发光管的性能.其电带宽大于60MHz,光带宽在100MHz以上.在200mA辐射度为1017W/cm2·sr.尾纤输出超过160μw(NA=0.2).分析和讨论了影响辐射输出和调制能力的诸因素,并选取了最佳折衷方案.     

1.3 GHz超导腔磁通排出效应研究

设计并搭建了一套高精度的磁场测量和补偿系统,并结合中国科学院高能物理研究所（IHEP）的2K超导腔垂直测试平台对1.3 GHz 单加速间隙超导腔的磁通排出效应开展了实验研究：利用研制的磁场测量和补偿系统能够精密地测量超导腔赤道位置磁场,并能够将磁场补偿至小于5.0×10⁻⁸ T;并对超导腔不同表面温度梯度下的磁通排出效应进行了测量分析;对钉扎了磁场的超导腔进行了射频性能测试,研究了超导腔电阻对磁通钉扎的敏感度,以及在不同电场梯度下超导腔的表面电阻变化情况。结果表明,研制的高精度磁场测量和补偿系统能够满足超导腔磁通排出研究的需求;高的超导腔表面温度梯度有利于磁通的排出;磁通钉扎电阻的敏感度随着加速电场梯度的增加而增大,导致超导腔的性能下降。此实验研究也为后续超导腔的研制奠定了一定基础。     

Fast Liquid Phase Epitaxial Growth for Perovskite Single Crystals

Semiconductors grown by the solution-processed method have shown low-cost,facile fabrication process and comparable performance.However,there are many reasons why it is difficult to achieve high quality films.For example,lattice constant mismatch is one of the problems when photovoltaic devices made of organ metallic perovskites.In this work,MAPbBr^{MA=CH3NH3^+}perovskites single crystals grown on the surface of MAPbBr2.5 CI0.5 perovskites single crystals via liquid epitaxial growth method is demonstrated.It is found that when the lattice constants of the two perovskite single crystals are matched,another crystal can be grown on the surface of one crystal by epitaxial growth.The whole epitaxy growth process does not require high heating temperature and long heating time.X-ray diffraction method is used to prove the lattice plane of the substrate and the epitaxial grown layer.A scanning electron microscope is used to measure the thickness of the epitaxial layer.Compared with perovskite-based photodetectors without epitaxial growth layer,perovskite-based photodetectors with epitaxial growth layer have lower dark current density and higher optical responsibility.