Three Distinct Redox States of an Oxo‐Bridged Dinuclear Ruthenium Complex

A series of [{(terpy)(bpy)Ru}(μ‐O){Ru(bpy)(terpy)}]ⁿ⁺ ( [RuORu]ⁿ⁺ , terpy=2,2′;6′,2′′‐terpyridine, bpy=2,2′‐bipyridine) was systematically synthesized and characterized in three distinct redox states (n=3, 4, and 5 for Ru^II,III₂ , Ru^III,III₂ , and Ru^III,IV₂ , respectively). The crystal structures of [RuORu]ⁿ⁺ (n=3, 4, 5) in all three redox states were successfully determined. X‐ray crystallography showed that the Ru? O distances and the Ru‐O‐Ru angles are mainly regulated by the oxidation states of the ruthenium centers. X‐ray crystallography and ESR spectra clearly revealed the detailed electronic structures of two mixed‐valence complexes, [Ru^IIIORu^IV]⁵⁺ and [Ru^IIORu^III]³⁺ , in which each unpaired electron is completely delocalized across the oxo‐bridged dinuclear core. These findings allow us to understand the systematic changes in structure and electronic state that accompany the changes in the redox state.     

Chemical constituents of Glycosmis citrifolia (Willd.) Lindl. Structures of four new acridones and three new quinolone alkaloids

The structures of two new dimeric acridone alkaloids, glycobismine-D (1) and -E (2), having a novel linkage as binary acridones, three monomeric acridones, glycocitrine-IV (3), -V (4), and -VI (5), and three quinolone alkaloids, glycocitlone-A (6), -B (7), and -C (8) from Glycosmis citrifolia (Willd.) Lindl. (Rutaceae) have been elucidated by spectrometric studies.     

Total deposition velocities and scavenging ratios of 7Be and 210Pb at Rokkasho, Japan

The atmospheric concentrations and deposition fluxes of ⁷Be and ²¹⁰Pb were observed biweekly in Rokkasho, Japan on the Pacific Ocean coast at the northern end of Honshu Island, from March 2000 to March 2006, to clarify their regional features. Seasonal variation pattern of atmospheric ⁷Be concentrations had double peaks, and that of ²¹⁰Pb had a single peak. Deposition fluxes of ⁷Be and ²¹⁰Pb showed the same patterns. The total deposition pattern of ⁷Be was similar to that commonly seen on the Pacific Ocean side of northern Honshu Island, while the pattern of ²¹⁰Pb was similar to that commonly seen on the Japan Sea side. The lack of high spine mountains windward in Rokkasho may be the cause of this ambiguity in the winter monsoon season. Total deposition velocities and scavenging ratios of ²¹⁰Pb were similar to those of ⁷Be from spring to fall, and showed that both nuclides had a similar removal process from the atmosphere. However, the scavenging ratios of ²¹⁰Pb were slightly larger than those of ⁷Be in winter, indicating different behaviors for both nuclides in the scavenging process. The scavenging ratios of both nuclides inversely correlated with precipitation rate, and the ratios in winter were larger than in the other seasons.     

Electron transfer of quinone self-assembled monolayers on a gold electrode

Dialkyl disulfide-linked naphthoquinone, (NQ-C_n-S)₂, and anthraquinone, (AQ-C_n-S)₂, derivatives with different spacer alkyl chains (C_n: n = 2, 6, 12) were synthesized and these quinone derivatives were self-assembled on a gold electrode. The formation of self-assembled monolayers (SAMs) of these derivatives on a gold electrode was confirmed by infrared reflection-absorption spectroscopy (IR-RAS). Electron transfer between the derivatives and the gold electrode was studied by cyclic voltammetry. On the cyclic voltammogram a reversible redox reaction between quinone (Q) and hydroquinone (QH₂) was clearly observed under an aqueous condition. The formal potentials for NQ and AQ derivatives were −0.48 and −0.58 V, respectively, that did not depend on the spacer length. The oxidation and reduction peak currents were strongly dependent on the spacer alkyl chain length. The redox behavior of quinone derivatives depended on the pH condition of the buffer solution. The pH dependence was in agreement with a theoretical value of E_1/2 (mV) = E′ − 59pH for 2H⁺/2e⁻ process in the pH range 3–11. In the range higher than pH 11, the value was estimated with E_1/2 (mV) = E′ − 30pH , which may correspond to H⁺/2e⁻ process. The tunneling barrier coefficients (β) for NQ and AQ SAMs were determined to be 0.12 and 0.73 per methylene group (CH₂), respectively. Comparison of the structures and the alkyl chain length of quinones derivatives on these electron transfers on the electrode is made.     

Measurement of hyperfine structure constants,g values and tensor polarizability of excited states of Sm I

Atomic-beam laser spectroscopy with fluorescence detection is applied to investigate the hyperfine structure (hfs), Stark and Zeeman effects of the electric dipole transitions of Sm i. The measurements are performed for the four transitions of 0 → 15650.55, 292.58 → 15650.55, 292.58 → 15567.32, and 1489.55 → 16890.59 cm^-1. The hfs constants of the upper and lower levels and the isotope shifts of the transitions are determined. The tensor polarizability of the 15650.55 cm^-1 level is found to be α₂ = -556.2 ± 11.8 kHz/(kV/cm)². Thanks to the accurate g values of the lower levels [Childs, W.J., Goodman, L.S.: Phys. Rev. A 6, 2011 (1972)], the g values of the upper levels are obtained from the observed Zeeman splittings. The values are found to be -0.115907(79), 2.22259(20) and 1.599968(51) for the 15650.55 cm^-1 .1, 15567.32 cm^-1 and 16890.59.cm^-1 levels, respectively.     

A novel construction of dibenzofuran-1,4-diones by oxidative cyclization of quinone-arenols

A novel oxidative cyclization of quinone-arenols 5 leading to products 6 with a dibenzofuran-1,4-dione structure, which forms the core of several natural products, has been developed and applied to the synthesis of violet-quinone (4).     

Bound site of Mo atoms and its local structure in a Mo/HY catalyst characterized by extended X-ray absorption fine structure and density functional calculation

The bound site of Mo atoms and its local structure in a Mo/HY catalyst have been determined by detailed analysis of extended X-ray absorption fine structure (EXAFS). Molybdenum was introduced in the supercage of HY zeolite by cycles of saturated adsorption of Mo(CO)6 at room temperature and subsequent thermal decomposition at 573 K. Two Mo atoms per supercage were immobilized in each CVD-thermal treatment cycle. The Mo loading increased linearly with the cycles up to three cycles at saturation, where six Mo atoms were supported. Temperature-programmed decomposition of the adsorbed Mo(CO)6 was also characterized by GC, QMS, and FT-IR, respectively. The EXAFS analysis including multiple scattering based on theoretical calculations revealed that Mo bound with two oxygen atoms connects to Al, where one of the two oxygen atoms had been associated with a proton. The bound site is called the S(III)' site. The zeolite framework was significantly distorted by the introduction of low-valent Mo, resulting in isolation of the [MoO2Al] unit from the surrounding zeolite framework due to a quasi-disruption of Si-O bonds adjacent to the unit. In the mild oxidation of the low-valent Mo/HY sample two Mo=O bonds were newly formed and the position of Mo was displaced by 0.06 nm so that the distortion of zeolite framework around the Al atom was relieved. The structures were also supported by DFT calculations. This study is the first example that the position of metal cation in zeolite was determined unambiguously by the EXAFS analysis.     

Combinatorial synthesis of MUC1 glycopeptides: polymer blotting facilitates chemical and enzymatic synthesis of highly complicated mucin glycopeptides

The chemoselective polymer blotting method allows for rapid and efficient synthesis of glycopeptides based on a "catch and release" strategy between solid-phase and water-soluble polymer supports. We have developed a heterobifunctional linker sensitive to glutamic acid specific protease (BLase). The general procedure consists of five steps, namely (i) the solid-phase synthesis of glycopeptide containing BLase sensitive linker, (ii) subsequent deprotections and the release of the glycopeptide from the resin, (iii) chemoselective blotting of the glycopeptide intermediates in the presence of water-soluble polymers with oxylamino functional groups, (iv) sugar elongations using glycosyltransferases, and (v) the release of target glycopeptides from the polymer platform by selective BLase promoted hydrolysis. The combined use of the solid-phase chemical syntheses of peptides and the enzymatic syntheses of carbohydrates on water-soluble polymers would greatly contribute to the production of complicated glycopeptide libraries, thereby enhancing applicative research. We report here a high-throughput synthetic system for the various types of MUC1 glycopeptides exhibiting a variety of sugar moieties. It is our belief that this concept will become part of the entrenched repertoire for the synthesis of biologically important glycopeptides on the basis of glycosyltransferase reactions in automated and combinatorial syntheses.     

Bonding structure of phenylacetylene on hydrogen-terminated Si(111) and Si(100): surface photoelectron spectroscopy analysis and ab initio calculations

Interfaces between phenylacetylene (PA) monolayers and two silicon surfaces, Si(111) and Si(100), are probed by X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and the results are analyzed using ab initio molecular orbital calculations. The monolayer systems are prepared via the surface hydrosilylation reaction between PA and hydrogen-terminated silicon surfaces. The following spectral features are obtained for both of the PA-Si(111) and PA-Si(100) systems: a broad π-π* shakeup peak at 292 eV (XPS), a broad first ionization peak at 3.8 eV (UPS), and a low-energy C 1s → π* resonance peak at 284.3 eV (NEXAFS). These findings are ascribed to a styrene-like π-conjugated molecular structure at the PA-Si interface by comparing the experimental data with theoretical analysis results. A conclusion is drawn that the vinyl group can keep its π-conjugation character on the hydrogen-terminated Si(100) [H:Si(100)] surface composed of the dihydride (SiH(2)) groups as well as on hydrogen-terminated Si(111) having the monohydride (SiH) group. The formation mechanism of the PA-Si(100) interface is investigated within cluster ab initio calculations, and the possible structure of the H:Si(100) surface is discussed based on available data.