Supramolecular polymer gels from polystyrene bearing cyclic amidine Group and acrylic acid/n‐butyl acrylate copolymers

We have prepared supramolecular polymer gels by mixing solutions of a polystyrene bearing cyclic amidine pendant groups (Poly‐A) and copolymers of acrylic acid and n‐butyl acrylate (Poly‐C), followed by evaporation. FT‐IR analysis indicated that the gels were formed through three‐dimensional network of the amidinium‐carboxylate salt bridge. DSC study showed that the Poly‐A and the Poly‐C were miscible when the salt bridge content was high. On the other hand, the mixtures with small salt bridge content showed phase separation. Dynamic shear measurements showed that the gel prepared from Poly‐A and Poly‐C with acrylic acid unit content of 15% had G' higher than G″ over a temperature range of ?22 °C to 32 °C, in which the G' value reached almost 1 MPa. The gel had a crossover point of G' and G″ at 32 °C, very close to room temperature, which suggested facile processability. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 765–770     

p-adic multiple zeta values I.

Our main aim in this paper is to give a foundation of the theory of p-adic multiple zeta values. We introduce (one variable) p-adic multiple polylogarithms by Colemans p-adic iterated integration theory. We define p-adic multiple zeta values to be special values of p-adic multiple polylogarithms. We consider the (formal) p-adic KZ equation and introduce the p-adic Drinfeld associator by using certain two fundamental solutions of the p-adic KZ equation. We show that our p-adic multiple polylogarithms appear as coefficients of a certain fundamental solution of the p-adic KZ equation and our p-adic multiple zeta values appear as coefficients of the p-adic Drinfeld associator. We show various properties of p-adic multiple zeta values, which are sometimes analogous to the complex case and are sometimes peculiar to the p-adic case, via the p-adic KZ equation.     

Radical ring‐opening polymerization of five‐membered cyclic vinyl sulfone using p‐toluenesulfonyl halides

Radical ring‐opening polymerizations of a five‐membered cyclic vinyl sulfone monomer, 2‐vinylthiolane‐1,1‐dioxide (VTDO), was carried out by using p‐toluenesulfonyl iodide (TosI) and bromide (TosBr) as radical initiators, and the corresponding ring‐opened polymer (PVTDO) was obtained. Both TosI and TosBr were found to work as the radical initiators for the polymerization of VTDO in bulk. The use of TosI gave PVTDOs with a broad, multimodal distribution of molecular weight in low yields. When 10 mol % of TosBr was employed, the isolated yield of PVTDO reached 49%, and the obtained PVTDO had a relatively narrow, monomodal molecular weight distribution of 1.8 with an M_n of 4100. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of complementary double-stranded helical oligomers through chiral and achiral amidinium-carboxylate salt bridges and chiral amplification in their double-helix formation

A series of complementary molecular strands from 2-mer to 5-mer that are composed of m-terphenyl units bearing chiral/achiral amidine or achiral carboxyl groups linked via Pt(II) acetylide complexes were synthesized by sequential stepwise reactions, and their chiroptical properties on the double-helix formation were investigated by circular dichroism (CD) and (1)H NMR spectroscopies. In CHCl(3), the "all-chiral" amidine strands consisting of (R)- or (S)-amidine units formed preferred-handed double helices with the complementary achiral carboxylic acid strands through the amidinium-carboxylate salt bridges, resulting in characteristic induced CDs in the Pt(II) acetylide complex regions, indicating that the chiral substituents on the amidine units biased a helical sense preference. The Cotton effect patterns and intensities were highly dependent on the molecular lengths. The complementary double-helix formation was also explored using the chiral/achiral amidine strands with different sequences in which a chiral amidine unit was introduced at the center (center-chiral) or a terminus (edge-chiral) of the amidine strands. The effect of the sequences of the chiral and achiral amidine units on the amplification of chirality (the "sergeants and soldiers" effect) in the double-helix formation was investigated by comparing the CD intensities with those of the corresponding all-chiral amidine double helices with the same molecular lengths. Variable-temperature CD experiments of the all-chiral and chiral/achiral amidine duplexes demonstrated that the Pt(II)-linked complementary duplexes are dynamic and their chiroptical properties including the chirality transfer from the chiral amidine unit to the achiral amidine ones are significantly affected by the molecular lengths, sequences, and temperatures. On the basis of the above results together with molecular dynamics simulation results, key structural features of the Pt(II)-linked oligomer duplexes and the effect of the chiral/achiral amidine sequences on the amplification of chirality are discussed.     

Laser Light and X-Ray Diffraction Studies of Oriented Isotactic Polypropylene (iPP) Prepared by Temperature Slope Crystallization

Isotactic polypropylene (iPP) film was melt-crystallized in a temperature gradient. The iPP film showed well oriented α- and β-crystalline textures along the gradient. The crystalline structure, phase transition boundary and lamellar twisting were examined by X-ray diffraction and laser light diffraction (LLD). On the α-β boundary, LLD shows a sharp streak perpendicular to the boundary, where the a-axis of the β-crystal is oriented perpendicular to the temperature gradient. Apart from the boundary, the a-axis of the β-crystal becomes parallel to the gradient. The β-crystal shows lamellar twisting with a pitch of 200 μm at room temperature. When heated the β-crystal, the lamellar distance of 295Å at room temperature decreases to 285Å at 80–100°C and then increases to more than 300Å above 120°C. During the heating, the value of the twist period increases from 200 to 210 μm at 90–100°C, and then to above 224 μm at 140°C. The increase of the twist period is related to the increasing crystalline thickness of the β-lamellae.     

Double helical oligoresorcinols specifically recognize oligosaccharides via heteroduplex formation through noncovalent interactions in water

We report on the oligosaccharide recognition through noncovalent interactions in water based on a unique supramolecular homoduplex-to-heteroduplex transformation of the oligoresorcinol nonamer as a fully artificial receptor. The oligoresorcinol forms a double helix in water, which unravels and entwines upon complexation with specific oligosaccharides with a particular chain length and glucosidic linkage pattern, thus generating the heteroduplex with an excess one-handed helical conformation that can be readily monitored and further quantified by absorption, circular dichroism, and NMR spectroscopies.     

Construction of double-stranded metallosupramolecular polymers with a controlled helicity by combination of salt bridges and metal coordination

We describe the construction of the first double-stranded metallosupramolecular helical polymers. We designed and synthesized a supramolecular duplex comprised of complementary m-terphenyl-based strands bearing a chiral amidine or achiral carboxylic acid together with two pyridine groups at the four ends. Supramolecular polymerization of the duplex with cis-PtPh2(DMSO)2 in 1,1,2,2-tetrachloroethane produced the double-stranded metallosupramolecular polymer with a controlled helicity of which the two complementary metallostrands are intertwined through the amidinium-carboxylate salt bridges. The structures and hydrodynamic dimensions of the metallosupramolecular polymers were characterized by 1H NMR, diffusion-ordered NMR, dynamic light scattering, absorption, and CD measurements. The polymeric structure was also visualized by atomic force microscopy.     

Key role of the Lewis base position in asymmetric bifunctional catalysis: design and evaluation of a new ligand for chiral polymetallic catalysts

New chiral ligands for asymmetric polymetallic catalysts were designed on the basis of the assumption that the higher-order assembly structure is stabilized by modifying the modular unit. The designed ligands 6 and 7 contained a scaffolding cyclohexane ring with a Lewis base phosphine oxide directly attached to the scaffold. A module in the polymetallic complex contains two metals per ligand, and a stable 6-, 5-, 5-membered fused chelation ring system should be generated. Synthesis of these ligands is simple and high yielding, using a catalytic dynamic kinetic resolution promoted by the Trost catalyst as a key step. Ligand function was assessed in a catalytic asymmetric ring-opening reaction of meso-aziridines with TMSCN, a useful reaction for the synthesis of optically active beta-amino acids. The Gd complex generated from Gd(OiPr)3 and the ligand was a highly active and enantioselective catalyst in this reaction. Enantioselectivity was reversed compared to the previously reported d-glucose-derived catalyst containing the same chirality of the individual module. ESI-MS analysis and X-ray crystallographic studies indicate that the assembly state of the modules in the polymetallic catalysts differs depending on the chiral ligand. The difference in the higher-order structure stems from a subtle change (one carbon) in the position of the Lewis base relative to the Gd metal. The change in the higher-order structure of the polymetallic complex led to a dramatic reversal of the enantioselectivity and increased catalyst activity.