Application of solvent extraction and synchronous spectrofluorimetry to the determination of the formation constant for a 1:1 complex of carbazole withβ-cyclodextrin in water-dimethyl sulfoxide medium

Extraction of carbazole in heptane was performed at 25±1°C with an aqueous dimethyl sulfoxide (DMSO) medium containing -cyclodextrin (CD) at consecutive concentrations in the range of 0–10 mM. The fluorescence intensity of carbazole remaining in the heptane phase was measured by synchronous scanning fluorimetry. The apparent formation constant (K _f) for a 1:1 carbazole: CD inclusion complex in water-DMSO medium was determined by using a linear plot of the distribution ratio calculated from the fluorescence intensities vs. the -CD concentration. The values thus obtained ranged from 477 M^–1 in a 10% v/v DMSO medium to 12.1 M^–1 in a 60% v/v medium. Good linear relationships were observed between logK _f and the DMSO concentration ([DMSO]), and also between logK _f and the logarithm of the distribution coefficient (K _d) for carbazole. The formation constant in 100% water was estimated to be approximately 1.0×10³ M^–1 on the basis of the logK _f vs. [DMSO] and the logK _f vs. logK _d correlations.     

Synthetic process to control the total size and component distribution of multilayer magnetic composite particles

A new synthetic process to prepare composite particles with multilayers, comprised of usual polymer latices, ultra-fine magnetic particles, and a polystyrene layer was examined under various solution conditions.First, the synthetic conditions of heterocoagulates, consisted of polystyrene latices (2a=180900 nm) and NiO·ZnO·Fe₂O₃ particles (2a=20 nm), were investigated as a function of medium pH, particle concentration, and particle size ratio, based on the concept of the heterocoagulation theory as applied by Harding et al. Regular heterocoagulates were generated under suitable medium and mixing conditions, and that their total size can be controlled by selecting the size of the original polymer latices used as the core.Second, the best encapsulation condition of the heterocoagulates via emulsion polymerization with polystyrene monomer was surveyed. The encapsulation of the heterocoagulates was greatly promoted by pretreatment with oleate molecules, although there is no tendency for the encapsulation when the surfactant-free bare heterocoagulates are used as the core.     

LETHAL AND MUTAGENIC ACTION OF VACUUM-AND FAR-ULTRAVIOLET RADIATIONS ON DRY X174 PHAGE

Killing and mutation of dry X174 phages (amber mutant) were investigated with vacuum-UV (130, 150 and 190 nm) and far-UV (254 nm) radiations. The sensitivity to killing was greatest at 130 nm; the sensitivity (in terms of energy fluence) at 130 nm was about 17 times higher than that at 150 nm. The reversion frequency of amber mutants to pseudo-wild type at 190 nm was lower than at 254 nm. Comparison of the induction rate of revertants per survivor showed that mutagenicity after 130 nm radiation, which may raise the ionization process, and after X-rays was similar.     

Depletion flocculation of latex dispersion in ionic micellar systems

The flocculation behavior of anionic and cationic latex dispersions induced by addition of ionic surfactants with different polarities (SDS and cetyltrimethylammonium bromide (CTAB)) have been evaluated by rheological measurements. It was found that in identical polar surfactant systems with particle surfaces of SDS + anionic lattices and CTAB + cationic lattices, a weak and reversible flocculation has been observed in a limited concentration region of surfactant, which was analyzed as a repletion flocculation induced by the volume-restriction effect of the surfactant micelles. On the other hand, in oppositely charged surfactant systems (SDS + cationic lattices and CTAB + anionic lattices), the particles were flocculated strongly in a low surfactant concentration region, which will be based on the charge neutralization and hydrophobic effects from the adsorbed surfactant molecules. After the particles stabilized by the electrostatic repulsion of adsorbed surfactant layers, the system viscosity shows a weak maximum again in a limited concentration region. This weak maximum was influenced by the shear rate and has a complete reversible character, which means that this weak flocculation will be due to the depletion effect from the free micelles after saturated adsorption.     

Simplified determining procedure for routine residue monitoring of sulphamethazine and sulphadimethoxine in milk

A simplified determining/identifying method for residual sulphamethazine (SMZ) and sulphadimethoxine (SDM) in milk by using a high-performance liquid chromatography (HPLC) with a photo-diode array detector was presented. Both sulphonamides in cow's milk samples were extracted by only stirring with ethanol followed by an Ultrafree-MC/Biomax as a centrifugal ultra-filtration unit. For determination/identification of SMZ and SDM, a Mightysil RP-18 GP Aqua column and a mobile phase of 25% (v/v) ethanol solution (in water) with a photo-diode array detector was used. Average recoveries from spiked SMZ and SDM (10-1000 ng/ml each drug) were > or = 83% with the relative standard deviations between 1.4 and 3.7%. The limit of quantitation (LOQ) were calculated to be 5 ng/ml for SMZ and 10 ng/ml for SDM, respectively. The values were below the MRL/tolerance (SMZ, 25 ng/ml; SDM, 10 ng/ml). The total time and solvent required for the analysis of one sample were <35 min and <2 ml of only ethanol, respectively. No toxic solvents were used. The developed procedure was harmless to the human and environment.     

Matrix solid-phase dispersion extraction and high-performance liquid chromatographic determination of residual sulfonamides in chicken.

Simultaneous determination of the six sulfonamides (SAs) sulfadiazine, sulfadimidine, sulfamonomethoxine, sulfamethoxazole, sulfadimethoxine and sulfaquinoxaline in chicken using matrix solid-phase dispersion (MSPD) with neutral aluminium oxide as an MSPD sorbent and high-performance liquid chromatography (HPLC) is presented. In the present MSPD, six SAs could be isolated by only one step, elution with a 70% (v/v) aqueous ethanol solution, without the sorbent conditioning and the sorbent-tissue matrix washing. For the HPLC determination, a LiChrospher 100 RP-8 and a mixture of 1% acetic acid solution (pH 3.0, in water)-acetonitrile-N,N-dimethylformamide (78:22:5, v/v/v) as the mobile phase with a photodiode array detector were used. Average recoveries were greater than 87.6% with relative standard deviations between 0.5 and 8.6%. The total time and amount of solvent required for the analysis of one sample were <1.5 h and <12 ml, respectively.     

Direct monitoring of DNA cleavages catalyzed by an ATP-dependent deoxyribonuclease on a 27 MHz quartz-crystal microbalance

Kinetic studies of enzymatic DNA cleavage reactions (the enzyme binding, hydrolysis along DNA strands, and then release of the enzyme from the completely hydrolyzed ssDNA) were carried out on a 27 MHz quartz-crystal microbalance.     

Colloid chemical studies of polystyrene latices polymerized without any surface-active agents

Summary The influence of secondary minimum for the stability of spherical colloid has been studied using a series of soap-free polystyrene latices from 350 m to 1400 m in diameter.The critical flocculation concentration (c. f. c.) and the zeta-potential at the c. f. c. for each latex were determined with several salts of different ionic valencies. The values of c. f. c. varied with the particle size, reaching a maximum value at 750 m and then decreasing gradually with the diameter.Another phenomenon detected in the experiment was the complete reversibility of coagulation which was observed only in the cases of large size latices, i. e., the coagulates of large size particles were fully redispersed in the solution by stirring. The time-dependence of their sedimentation curves was reproducible.These experimental results could not be explained by the simple theoretical consideration for stability of suspension. The satisfactory explanation is given only using the term of secondary minimum of interaction potential, i. e., the origin of coagulation was shifted from the ordinary primary minimum to the shallow secondary minimum at about 750 m of the particle diameter.

---

Zusammenfassung Der Einfluß des Sekundär-Minimum auf die Stabilität von Kolloiden wurde an seifenfreien Polystyrol-Latex-Suspensionen mit einem Durchmesser von 350 m bis 1400 m untersucht. Die kritische Flockungskonzentration (c. f. c.) und das Zeta-Potential bei c. f. c. wurde mit verschiedenen Salzen bestimmt.Der Wert von c. f. c. ändert sich mit der Teilchengröße.Ein weiterer wichtiger experimenteller Befund ist die vollständige Reversibilität der Flockung bei größeren Latices.Derartige Versuchsergebnisse können durch das Sekundär-Minimum befriedigend erklärt werden.

---

---

With 7 figures in 10 details and 2 tables     

High-fidelity teleportation beyond the no-cloning limit and entanglement swapping for continuous variables

We experimentally demonstrate continuous-variable quantum teleportation beyond the no-cloning limit. We teleport a coherent state and achieve the fidelity of 0.70 +/- 0.02 that surpasses the no-cloning limit of 2/3. Surpassing the limit is necessary to transfer the nonclassicality of an input quantum state. By using our high-fidelity teleporter, we demonstrate entanglement swapping, namely, teleportation of quantum entanglement, as an example of transfer of nonclassicality.