Gamma-ray spectra of 201Tl-radiopharmaceuticals with a scintillation camera--crosstalk of contaminating nuclides of 200Tl and/or 202Tl onto 201Tl-photopeaks

In cardiac imaging with 201Tl, the collimator for low energy high resolution is generally used, and also the energy window, which is set on the spectral display of a pulse height analyzer of a scintillation camera, is chosen 70 +/- 12.5 keV. The purpose of this study is to discuss those conditions in 201Tl imaging with the scintillation camera. Two types of collimators for HR (high resolution) and ME (medium energy) were used in this experiment, and we measured the pulse height spectra of 201TlCl radiopharmaceuticals in air and in a cuboid phantom, connecting a multi-channel pulse height analyzer to the scintillation camera. As a result of measuring of the pulse height spectra, two different energies of gamma rays which are not supposed to emit from 201Tl nuclide were observed, and we also identified the presence of a small amount of 202Tl (with 439 keV) and/or 200Tl (with 368 keV) from their half-life measurements. Thus, the use of the HR-collimator with 201Tl imaging is not suitable, because the shielding effects of its septa is poor to 439 keV gamma-rays, and the scattered radiation produced by the Compton interaction contributes to the principal photopeak on the pulse height spectrum. Here, we recommend the use ME-collimator instead of the HR-one, and of the window width of 76 +/- 25 keV for increasing the count rate.     

The formation of clathrate-like hydrates of tetrabutylammonium halogenated carboxylates

The solid-liquid phase diagrams of binary mixtures of tetrabutylammonium halogenated carboxylates with water were examined in order to confirm the formation of clathrate-like hydrates. It was found that, among thirteen carboxylates examined, four carboxylates having CH₂FCOO^–, CHF₂COO^–, CF₃COO^–, and CH₂ClCOO^–, formed a hydrate with hydration numbers around 30 and seven carboxylates having CHCl₂COO^–, CCl₃COO^–, CH₂BrCOO^–, CHBr₂COO^–, CBr₃COO^–, CH₃CHClCOO^–, and CH₃CHBrCOO^– formed a hydrate with hydration numbers around 23. The latter hydrate has not been reported earlier. The melting points of these newly found hydrates were fairly high: they lie between 10 and 16°C. The effect of Cl and Br atoms attached to the carbon atom of the-position of a carboxylate anion both on the type of hydrate formed and on its stability was greatly different from that of a CH₃ group attached to the same position of the carboxylate anion.Dedicated to Dr D. W. Davidson in honor of his great contributions to the sciences of inclusion phenomena.     

Prediction of measurement precision of apparatus using a chemometric tool in electrochemical detection of high-performance liquid chromatography

The relative standard deviation (RSD) of measurements in high-performance liquid chromatography with electrochemical detection (HPLC-ECD) was predicted by a chemometric tool based on the 1/f fluctuation model which is made up of white noise and a Markov process, called the Function of Mutual Information (FUMI) theory. FUMI theory can provide aprecise and reliable detection limit from a single measurement of noise and signal in HPLC-ECD. To obtain RSD (n = 5) for determination of (-)-epicatechin at five concentrations required 12.5 h, while the predicted RSD by FUMI theory required only 0.5 h (one measurement). Moreover, to trace the source of instrumental noise, power spectra of chromatographic baseline were used. Selection of a suitable apparatus in HPLC-ECD system, acquisition of RSD, and detection limits for determination of catechins by HPLC-ECD were simply and easily made by this chemometric tool within a very short time. The use of the FUMI theory for the prediction of measuring precision was more efficient and the optimization was less time-consuming to be suited for determination.     

Control of separation selectivity in micellar electrokinetic chromatography by modification of the micellar phase with solubilized organic compounds

On the basis of the data on the distribution of various neutral solutes between sodium dodecyl sulfate (SDS) micelles and water, the control of separation selectivity in micellar electrokinetic chromatography (MEKC) by modification of the micellar phase with organic additives has been proposed and applied to the separation of simple model compounds. It was found that the distribution constants between the micelles and water (K_d,mc), which were determined by means of MEKC, of the solutes possessing hydrophilic functional groups are much larger than those between heptane and water (K_d,hep), whereas the K_d,mc values of the solutes possessing no hydropholic groups are comparable to their K_d,hep values. This indicates that the former solutes are preferentially solubilized in the Stern layer of the micelles and that the latter are located in the hydrocarbon core. In MEKC separations of aromatic compounds and metal acetylacetonates, considerable changes in separation selectivity were caused by the addition of compounds possessing both hydrophilic functional groups such as alcohols, phenol and ketones to the SDS micellar solution. The variations of the retention factors of the analytes could be explained in terms of saturation of the solubilization sites in the Stern layer with the modifiers, specific interaction of the modifiers with the analytes via hydrogen bonding in the micelles, and expansion of the core volume with the hydrocarbon parts of the modifiers. Such effects of the micellar modification could improve the resolution as well as the selectivity of MEKC separations.     

Optimization of HPLC-ECD conditions for determination of catechins with precision and efficiency based on the FUMI theory.

A chemometric tool based on the Function of Mutual Information (FUMI) theory can provide a relative standard deviation (RSD) without repetitive measurements in high-performance liquid chromatography with electrochemical detection (HPLC-ECD). Two parameters: precision (= information content) phi and efficiency (= information content/time) theta, which were calculated from predicted RSD based on the FUMI theory, were used to optimize HPLC-ECD conditions, such as applied potential, flow rate, column length, and size of ODS porous packing. We selected catechins as analytes, and found that the most optimum applied potential and flow rate were +600 mV vs. SCE and 0.9 mL/min, respectively, because they gave the largest phi and theta values. Buffer concentration in mobile phase is less effective for giving large phi and theta values. Since the FUMI theory makes it possible to predict RSD without repetitive measurements, the present method saves considerable amounts of chemicals and experimental time, and was found to be useful for the optimization of experimental conditions for determination by HPLC-ECD.     

A synthesis of chiral 1,1,3-trisubstituted 1,2,3,4-tetrahydro-beta-carbolines by the Pictet-Spengler reaction of tryptophan and ketones: conversion of (1R,3S)-diastereomers into their (1S,3S)-counterparts by scission of the C(1)-N(2) bond

The Pictet-Spengler cyclization of the imines (3) prepared by the condensation of L-tryptophan methyl ester (1) and aryl methyl ketones (2), using titanium(IV) isopropoxide as an iminating reagent, quantitatively proceeded, when treated with trifluoroacetic acid (TFA) or formic acid, to provide two diastereomers, that is (1S,3S)-1-aryl-3-isopropoxycarbonyl-1-methyl-1,2,3,4-tetrahydro-beta-carbolines (4) and their (1R,3S)-diastereomers (5), of which the diastereomer ratios varied from 1 to 5 depending on the reaction conditions. The (1R,3S)-diastereomers (5) are thermodynamically more stable than their (1S,3S)-congeners (4), as shown by equilibration experiments in TFA. The conversion of 4 to 5 (also 5 to 4) should occur under acidic conditions by cleavage of the C(1)-N(2) bond with complete retention of configuration at the C-3 chiral center. The low diastereo-selectivity observed in the Pictet-Spengler reaction of 1 and 2 is concluded to be a stereochemical outcome under conditions of kinetic control (lower temperature, shorter reaction time), while the high diastereo selectivity with preferential formation of the more stable isomer (5) is the result of thermodynamically controlled experiments (higher temperature, longer reaction time).     

Snytheses of analgesics. Part XXXVII. An alternative synthesis of 1,2,3,4, 5, 6-hexahydro-8-hydroxy-2,6-methano-6, h-dimethyl-3-phenethyl-3-benzazoeine [studies on the syntheses of heterocyclic compounds. Part DXXI]

Acid treatment of the alkylated products of (Va, Vb, and VIII) of piperidinols IVa and IVb, and tetrahydropyridine VII with β-bromoethylbenzene, afforded 1,2,3,4,5,6-hexahydro-8-hydroxy-2,6-methano-6,1 1-dimethyl-3-phenethyl-3-benzazocine (la) in good yield. Piperidinols Va and Vb were also obtained from the reaction of N-(3-methyl-3-pentenyl)-β-phenethylamine (IIb) with methyl 3-(4-methoxyphenyl)-2,3-epoxypropionate.     

Physical and Chemical Properties of Four-Membered Bis(triphenylphosphane)platinum(II) Sulfenato Thiolato Complexes

The reaction of isolable dithiirane 1-oxides with (Ph 3 P) 2 Pt( m 2 -C 2 H 4 ) provided the title complexes in high yields. 31 P NMR spectroscopy of the phosphine ligands of the complexes and x-ray crystallographic analysis of a complex were reported.     

High-speed deposition of RE123 film with large current capacity by hot-wall type PLD system

We have studied a hot-wall heating system to produce GdBa₂Cu₃O_y (GdBCO) films with large critical currents (I_c) at a high production rate by a pulsed-laser-deposition (PLD) method. GdBCO films fabricated at a production rate of 30 m/h under the optimized conditions, especially a distance of 95 mm between the target and the substrate (T–S), exhibited high critical current densities (J_c) of about 3 MA/cm² and I_c over 300 A at a thickness of 1–2 μm. Furthermore, long GdBCO tapes prepared by repeated depositions at each tape-passing speed of 80 m/h showed uniform I_c distribution along the longitudinal direction, because the hot-wall system enabled to stabilize temperature within a few degrees at 800 °C. A 170 m long tape with I_c over 600 A was successfully fabricated at a production rate of 16 m/h using a laser power of 360 W.