A direct electrochemical route to construct a polymer/manganese oxide layered structure

A layered nanocomposite with poly(diallyldimethylammonium), PDDA, intercalated between manganese oxide layers can be formed on a platinum electrode in a thin film form through a direct electrochemical route. The process involves a potentiostatic oxidation of aqueous Mn(2+) precursors in the presence of PDDA by applying a constant potential (+1.0 V vs Ag/AgCl).     

Measurement of the solubility of metal complexes in supercritical carbon dioxide using a UV–vis spectrometer

A new apparatus based on the circulation method was developed to measure the solubility of metal complexes in supercritical carbon dioxide (scCO₂) at a wide range of temperatures and pressures. A UV–vis spectrometer, which was connected to a small saturation cell through optical fibers, was used to determine solubility. The solubilities of cobalt(III) acetylacetonate (Co(acac)₃) and chromium(III) acetylacetonate (Cr(acac)₃) in scCO₂ were measured to check the validity of both the apparatus and the method and to accumulate new solubility data. The solubility data for Cr(acac)₃ obtained in this study were in good agreement with the data reported in the literature.The measured solubilities of Co(acac)₃ and Cr(acac)₃ were also correlated with the empirical equation including the three adjustable parameters, based on the equation proposed by Chrastil. The parameters were determined by fitting the equation to the experimental data for each metal complex and the calculated results closely replicated the experimental data.     

Effective 2,6-substitution of piperidine nitroxyl radical by carbonyl compound

Nitroxyl radicals (nitroxides) with unpaired electron are widely used as antioxidants, contrast agents, and spin probes. Although piperidine nitroxyl radicals have many applications, these are mainly tetramethylpiperidine compounds, and only a few reports consider the substitution of N-O surround as a reaction site, such as 2,2,6,6-tetrasubstituted piperidine nitroxyl radicals. Our results revealed that the 2,6-position of the 2,2,6,6-tetramethylpiperidin-4-one compound was substituted by cyclohexyl groups to produce 2,2,6,6-tetrasubstituted piperidin-4-one derivatives under mild reaction conditions. An interesting result was obtained by using ¹⁵N-labeled NH₄Cl instead of ¹⁴NH₄Cl: it gave ¹⁵N-labeled 2,2,6,6-tetrasubstituted piperidin-4-one-1-oxyls with a high ¹⁵N content. In conclusion, the new method for the synthesis of nitroxyl radicals readily yields 2,2,6,6-tetrasubstituted piperidin-4-one under mild conditions.     

An effective synthesis of N,N-dimethylamides from carboxylic acids and a new route from N,N-dimethylamides to 1,2-diaryl-1,2-diketones

Carboxylic acids were heated at 150 °C in DMF in the presence of 1.25 equiv of thionyl chloride to give corresponding N,N-dimethylamides in good yields. Tandem chlorination and amidation reactions occurred in the one-pot procedure. Dicarboxylic acids needed prolonged reaction time to produce bisamides in good yields. Some benzamides were efficiently converted into corresponding 1,2-diaryl-1,2-diketones (benzils) under acyloin condensation conditions in the presence of 4,4′-di-tert-butylbiphenyl (DBB) in THF. Ultrasonic irradiation effectively accelerates the reaction, but it is not critical. However, the presence of DBB is fatal to the reaction. Although a few synthetic methods for benzils from benzoic acids have been reported so far, this method is one of the most convenient and highly reproducible procedures.     

Synthesis of a highly luminescent three-dimensional pyrene dye based on the spirobifluorene skeleton

We have synthesized a highly luminescent (log e > 5.0, F > 0.9) pyrene dye based on a spirobifluorene skeleton [2,2',7,7'-tetrakis(7-tert-butyl-1-pyrenyl)-9,9'-spirobi[9H-fluorene; 4-PySBF]. The use of spirobifluorene prevents fluorescence quenching by intramolecular energy transfer and/or electron transfer among the chromophores in the excited state. The emission spectra of 4-PySBF exhibited a red shift of 20 nm in comparison to a model compound [9,9'-dioctyl-2,7-bis(7-tert-butyl-1-pyrenyl)-9H-fluorene; 2-PyF], but its UV-Vis spectrum remained unchanged.     

Peierls mechanism of the metal-insulator transition in ferromagnetic hollandite K2Cr8O16

Synchrotron x-ray diffraction experiment shows that the metal-insulator transition occurring in a ferromagnetic state of a hollandite K(2)Cr(8)O(16) is accompanied by a structural distortion from the tetragonal I4/m to monoclinic P112(1)/a phase with a √2×√2×1 supercell. Detailed electronic structure calculations demonstrate that the metal-insulator transition is caused by a Peierls instability in the quasi-one-dimensional column structure made of four coupled Cr-O chains running in the c direction, leading to the formation of tetramers of Cr ions below the transition temperature. This provides a rare example of the Peierls transition of fully spin-polarized electron systems.     

9,9′‐spirobifluorene‐containing polycarbonates: Transparent polymers with high refractive index and low birefringence

Syntheses of 2,2′‐bisalcoholic group‐substituted 9,9′‐spirobifluorene monomers 2 were performed by the reaction of 2,2′‐dihydroxy‐9,9′‐spirobifluorene 2a with haloalcohols. Polycarbonates consisting of 9,9′‐spirobifluorene skeleton in the main chain (PC 4 ) were synthesized by the polycondensation of 2,2′‐bisalcoholic monomers 2 and triphosgene or diphenyl carbonate. PC 4 showed good thermal stability: the 5% weight loss temperature was over 330 °C under both nitrogen and air atmospheres. The glass transition temperature was in a range of 16–269 °C estimated by differential scanning calorimetry, depending on the flexibility of the alkylene or oxyethylene chains of 2 . PC 4 showed high solubility toward ordinary organic solvents such as CHCl₃, benzene, and THF, making possible the preparation of the flexible thin films. Very high refractive index in a range of 1.62–1.66 at 589 nm was observed although PC 4 consists only of C, H, and O atoms, whereas very low degree of birefringence was confirmed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3658–3667, 2010     

Direct evidence for degradation of esperamicin A1 with thiol confirmed by fast-atom bombardment mass spectrometry.

A degradation of esperamicin A1, which is a potent antitumor antibiotic having DNA-cleaving activity, was studied by fast-atom bombardment (FAB) mass spectrometry. It was proved that the degradation easily occurs via the thiol group(s) in the matrix solution and not by a FAB-induced reaction. It was concluded that from the FAB mass spectra of all non-volatile compounds, the molecular weight should be determined by using at least two chemically different matrices.