On the topological derivative due to kink of a crack with non-penetration. Anti-plane model

A topological derivative is defined, which is caused by kinking of a crack, thus, representing the topological change. Using variational methods, the anti-plane model of a solid subject to a non-penetration condition imposed at the kinked crack is considered. The objective function of the potential energy is expanded with respect to the diminishing branch of the incipient crack. The respective sensitivity analysis is provided by a Saint-Venant principle and a local decomposition of the solution of the variational problem in the Fourier series.     

Unusual Glassy Smectic-G Liquid Crystal: Heat Capacity of N-p-n-Pentyloxybenzylidene-p'-n-butylaniline between 11 and 393 K

Abstract

The heat capacities of the title compound (C₃H₁₁,O—C₆H₄,- CH=N—C₆H₄,—C₄H₉, abbreviation 5O ? 4) with a purity of 99.92 mole percent have been measured with an adiabatic-type calorimeter between 11 and 393 K. The transition temperature and the enthalpy and entropy of phase transition for stable crystal → S_G, S_G → N and N → isotropic liquid were T _c = 299.69 K/ΔH = 22.68 kJ mol^?1/ΔS = 75.70 JK^?1 mol^?1, 325.72/7.11/21.79 and 342.48/1.78/5.22, respectively. The crystal which melts at 285.5 K is a metastable modification. The S_A phase hitherto reported in between S_G and N does not exist. The glassy So state was realized by rapid cooling of the specimen from the So phase. The molar enthalpy of the glassy S_G state at 0 K was by (10.1±0.1) kJ mol^?1 higher than that of the stable crystalline state and the residual entropy of the glassy state was (9.40±0.83) JK^?1 mol^?1. The relaxational heat-capacity anomaly was observed from as low as 100 K and double glass transition phenomenon occurred around 200 K; a quite unusual phenomenon which has never been observed for the glassy states of nematic and cholesteric liquid crystals. The present results give a fair evidence that the unusual glass transition phenomenon previously found for the S_G state of 6O?4 (a homologous compound) is not exceptional at all but common to the smectic glasses; at least common to the glassy S_G states. Two possible origins responsible for the double glass transitions have been discussed.     

Development of an engineering model for ferromagnetic shape memory alloys

This paper presents a relationship among stress, temperature and magnetic properties of a ferromagnetic shape memory alloy. In order to derive an engineering model of ferromagnetic shape memory alloys, we have developed a measuring system of the relationship among stress, temperature and magnetic properties. The samples used in this measurement are Fe68–Ni10–Cr9–Mn7–Si6 wt% ferromagnetic shape memory alloy. They are thin ribbons made by rapid cooling in air. In the measurement, the ribbon sample is inserted into a sample holder winding consisting of the B-coil and compensation coils, and magnetized in an open solenoid coil. The ribbon is stressed with attachment weights and heated with a heating wire. The specific susceptibility was increased by applying tension, and slightly increased by heating below the Curie temperature.     

π–π Stacking Interaction in an Oxidized CuII–Salen Complex with a Side-Chain Indole Ring: An Approach to the Function of the Tryptophan in the Active Site of Galactose Oxidase

In order to gain new insights into the effect of the π–π stacking interaction of the indole ring with the Cu^II–phenoxyl radical as seen in the active form of galactose oxidase, we have prepared a Cu^II complex of a methoxy-substituted salen-type ligand, containing a pendent indole ring on the dinitrogen chelate backbone, and characterized its one-electron-oxidized forms. The X-ray crystal structures of the oxidized Cu^II complex exhibited the π–π stacking interaction of the indole ring mainly with one of the two phenolate moieties. The phenolate moiety in close contact with the indole moiety showed the characteristic phenoxyl radical structural features, indicating that the indole ring favors the π–π stacking interaction with the phenoxyl radical. The UV/Vis/NIR spectra of the oxidized Cu^II complex with the pendent indole ring was significantly different from those of the complex without the side-chain indole ring, and the absorption and CD spectra exhibited a solvent dependence, which is in line with the phenoxyl radical–indole stacking interaction in solution. The other physicochemical results and theoretical calculations strongly support that the indole ring, as an electron donor, stabilizes the phenoxyl radical by the π–π stacking interaction.     

A Structurally Robust Chiral Borate Ion: Molecular Design,Synthesis, and Asymmetric Catalysis

Catalysis by chiral weakly‐coordinating anions (WCAs) remains underdeveloped due to the lack of a molecular design strategy for exploiting their characteristics, such as the non‐nucleophilic nature. Here, we report the development of a chiral borate ion comprising an O,N,N,O‐tetradentate backbone, which ensures hitherto unattainable structural robustness. Upon pairing with a proton, the hydrogen borate acts as an effective catalyst for the asymmetric Prins‐type cyclization of vinyl ethers, providing access to structurally and stereochemically defined dihydropyrans. The key to selectivity control is the distinct ability of the borate ion to discriminate the prochiral faces of the acyclic oxonium ion intermediate and dictate the regiochemical outcome. We anticipate that this study paves the way for exploring the untapped potential of WCA catalysis for selective chemical synthesis.     

Photophysical property and photostability of J-aggregate thin films of thiacyanine dyes prepared by the spin-coating method

By use of electrostatic interactions of dye molecules and poly(diallyldimethylammonium chloride) (PDDA), the spin-coating technique has been successfully applied to the preparation of stable J-aggregate thin films of thiacarbocyanine dyes on a polycarbonate or quartz plate. The J-aggregate thin films were prepared by the spin-coating of PDDA aqueous solution on dye thin films prepared on a substrate by the spin-coating of 2,2,3,3-tetrafluoro-1-propanol solution of dyes. Photophysical properties of the dye thin films and J-aggregate thin films were studied by measuring the fluorescence spectra, quantum yields, and lifetimes. Coherent size of the J-aggregates was estimated to be 3-12 by means of the absorption bandwidth (full width at half maximum) or radiative lifetime. Photostability of the J-aggregate thin films was also studied in terms of photodegradation efficiency under argon and oxygen in comparison with the dye thin films, and J-aggregate thin films were found to be more stable than the corresponding dye thin films.     

Optimized conditions for high-performance liquid chromatography analysis of oligosaccharides using 7-amino-4-methylcoumarin as a reductive amination reagent

Reductive amination reaction using 7-amino-4-methylcoumarin (AMC) as a fluorescent probe enabled analyses of glycoproteins' monosaccharides and N-linked oligosaccharides. Reductive amination of N-acetylhexosamines and AMC using sodium cyanoborohydride or dimethylamine-borane complex indicated slight recovery of derivatives, but pyridine-borane achieved better recoveries. Reversed-phase high-performance liquid chromatography (HPLC) analyses of monosaccharides constituting glycoprotein glycans using fluorimetric detection revealed linearity for 0.2fmol to 1pmol, with less than 5% RSD quantitation reproducibility. Reversed-phase HPLC analyses of glycoprotein glycans, combined with negative-ion electrospray ionization mass spectrometry (LC-ESI-MS), enabled their structural determination. Using this highly hydrophobic reagent, AMC-labeled oligosaccharides displayed one-order to two-order higher ESI-MS intensity than derivatives labeled using other reagents.     

Estimation of single-nucleotide polymorphism allele frequency by alternately binding probe competitive polymerase chain reaction

A modified solvent microextraction with back extraction method (SME/BE) combined with high performance liquid chromatography and fluorescence detection (HPLC-FD) was developed for the determination of citalopram in human plasma. Extraction process was performed in a home-made total glass vial without using a teflon ring, usually employed in SME/BE. Citalopram was first extracted from 0.5 mL of plasma, modified with sodium hydroxide, into hexane. Back extraction step was then performed into 5.2 μL of 45 mM ammonium formate solution (pH 4) using a GC microsyringe. The extract was subsequently transferred into a liner-like vial and then injected into the HPLC system. An enrichment factor of 150 along with a good sample clean-up was obtained. The calibration curve showed linearity in the range of 1.0–130.0 ng mL⁻¹ with regression coefficient corresponding to 0.992. This range covers therapeutic window and even lower amounts which is important in pharmacokinetic studies. Limits of detection and quantification, based on a signal to noise ratio (S/N) of 3 and 10, were 0.3 and 0.8 ng mL⁻¹, respectively. The method was also applied for the determination of citalopram in plasma samples after oral administration of 40 mg single dose of citalopram.     

Synthetic models of the active site of cytochrome C oxidase: influence of tridentate or tetradentate copper chelates bearing a His--Tyr linkage mimic on dioxygen adduct formation by heme/Cu complexes

Two synthetic models of the active site of cytochrome c oxidase--[(LN4-OH)CuI-FeII(TMP)]+ (1 a) and [(LN3-OH)CuI-FeII(TMP)]+ (2 a)-have been designed and synthesized. These models each contain a heme and a covalently attached copper moiety supported either by a tetradentate N4-copper chelate or by a tridentate N3-copper chelate including a moiety that acts as a mimic of the crosslinked His-Tyr component of cytochrome c oxidase. Low-temperature oxygenation reactions of these models have been investigated by spectroscopic methods including UV/Vis, resonance Raman, ESI-MS, and EPR spectroscopy. Oxygenation of the tetradentate model 1 a in MeCN and in other solvents produces a low-temperature-stable dioxygen-bridged peroxide [(LN4-OH)CuII-O2-FeIII(TMP)]+ {nuO--O=799 (16O2)/752 cm(-1) (18O2)}, while a heme superoxide species [(TMP)FeIII(O2-)CuIILN3-OH] {nuFe--O2: 576 (16O2)/551 cm(-1) (18O2)} is generated when the tridentate model 2 a is oxygenated in EtCN solution under similar experimental conditions. The coexistence of a heme superoxide species [(TMP)FeIII(O2-)CuIILN3-OH] and a bridged peroxide [(LN3-OH)CuII-O2-FeIII(TMP)]+ species in equal amounts is observed when the oxygenation reaction of 2 a is performed in CH2Cl(2)/7 % EtCN, while the percentage of the peroxide (approximately 70 %) in relation to superoxide (approximately 30 %) increases further when the crosslinked phenol moiety in 2 a is deprotonated to produce the bridged peroxide [(LN3-OH)CuII-O2-FeIII(TMP)]+ {nuO--O: 812 (16O2)/765 cm(-1) (18O2)} as the main dioxygen intermediate. The weak reducibility and decreased O2 reactivity of the tricoordinated CuI site in 2 a are responsible for the solvent-dependent formation of dioxygen adducts. The initial binding of dioxygen to the copper site en route to the formation of a bridged heme-O2-Cu intermediate by model 2 a is suggested and the deprotonated crosslinked His-Tyr moiety might contribute to enhancement of the O2 affinity of the CuI site at an early stage of the dioxygen-binding process.