Enrichment of surfactant from its aqueous solution using ultrasonic atomization

Dilute aqueous solutions of dodecyl-benzenesulfonic acid sodium salt (DBS-Na) and polyoxyethylenenonylphenyl ethers (PONPEs) were ultrasonically atomized. The surfactants were concentrated in collected mist droplets. The enrichment ratio increased with decreasing surfactant concentration. Depending on the surfactant’s molecular weight and affinity to water, different enrichment ratio was observed in the range of low feed concentrations. For anionic surfactant, DBS-Na, the enrichment ratio was significantly improved by KCl addition and a peak appeared on the plot of the ratio against KCl concentration. Addition of NaCl or CaCl₂ · 2H₂O to the surfactant solution also enhanced the enrichment ratio; however, the effect was relatively small. Such behaviors of the ratio were interpreted as enhanced interfacial adsorption of the surfactant and a lack of supply of surfactant monomers from liquid bulk because of slow breaking of surfactant micelles. Time required for collecting an amount of mist was also observed. Among the three salt systems, the time for KCl system was twice as long as others. This fact suggested that the formation of smaller droplets in KCl system.     

The nature of sulfur bonding in thiopyrylium cation

Comparison of the PMR spectrum ofthiopyrylium cation with those of the oxygen (pyrylium cation) and nitrogen (pyridinium cation) analogs has suggested the unique electronic structure of the thiopyrylium cation. To investigate this structure the extended Hückel MO calculations have been carried out using two basis sets, one with and another without sulfur 3d orbitals. The electronic structure of thiopyrylium cation can be rationalized by the 3d orbital involvement of the S atom in the basis set. The primary effect of the involvement of 3d orbitals on the S atom is shown to be the electron transfer from the ring carbon fragment, in particular from the β ring carbons, to the S atom, with an accompanying increase in sulfur-α-carbon bond order.     

Mechanochemistry and co-crystal formation: effect of solvent on reaction kinetics

We demonstrate that significant improvements in kinetics of co-crystal formation by grinding can be achieved by the addition of minor amounts of appropriate solvent.     

Polymerization of optically active disubstituted acetylene monomers by Pd catalyst bearing bulky phosphine ligand

Chloro- and aryl-substituted acetylene monomers having an optically active group were polymerized by a Pd catalyst [(^tBu₃P)PdMeCl] bearing a bulky phosphine ligand, and by MoCl₅ for comparison. The corresponding disubstituted acetylene polymers with M_n's = 2000–19,500 and 6900–10,800 were obtained in 29–83% and 11–62% yields when the Pd and Mo catalysts were used, respectively. The formation of polyacetylenes, poly[(R)- 1p ], poly[(R)- 1m ], and poly[(S)- 2p ] were confirmed by SEC and the presence of a Raman scattering peak based on the alternating double bonds of the main chain. Pd-based poly[(R)- 1m ] exhibited CD signals around 350 nm assignable to a certain secondary structure, while Mo-based poly[(R)- 1m ] did not. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3011–3016     

A synthesis of lumazine derivatives

Treatment of 6-amino-1,3-dimethyl-5-nitrosouracil (Ia) with dimethyl acetylenedicarboxylate (DMAD) in dimethylformamide (DMF) afforded 6,7-bis(dimethoxycarbonyl)-1,3-dimethyllumazine (II). Similarly, the reaction of 6-amino-1,3-dimethyl-5-phenylazouracil with DMAD gave also II. Hydrolysis of II with hydrochloric acid gave 1,3-dimethyllumazine-6-carboxylic acid (III). III was chlorinated with thionyl chloride and then aminated with ethanolic ammonia to give rise to 6-carbamoyl-1,3-dimethyllumazine (V). V was alternatively synthesized by the treatment of Ia with propiolamide in DMF.     

Spacer effect of appended moieties for molecular recognition in doubly-sodium anthranilate modified γ-cyclodextrin

-Cyclodextrin with two sodium anthranilate moieties (1) has been prepared as a sensor for detecting organic compounds including terpenoids and steroids. Compound1 shows a pure monomer fluorescence whose intensity is increased or decreased upon addition of the guest species examined. In this system, the sodium anthranilate moieties act either as a spacer, which enables the cyclodextrin to form a 1:1 host-guest complex by narrowing the -cyclodextrin cavity, or as a hydrophobic cap.1 recognizes steroids with much higher sensitivity than terpenoids, in which the appended moieties act as a hydrophobic cap for terpenoids and a spacer for steroids, respectively.     

Radiation Crosslinking of Chlorinated Poly(Isobutylene-co-Isoprene) with Polyfunctional Monomers

Abstract

It is well known that poly(isobutylene-co-isoprene) (butyl rubber, IIR) is degraded by irradiation. However, we demonstrated that IIR, after chlorination (CIIR) crosslinks by electron beam (EB) irradiation. The gel dose for CIIR was 3.8 kGy. To avoid scission of the main chain, various polyfunctional monomers were added for crosslinking of CIIR at lower doses. It was found that trimethylolpropane trimethacrylate (TMPT) is the most effective accelerator for crosslinking of CIIR at a lower dose. The tensile strength of EB crosslinked by CIIR increases almost linearly with increasing TMPT content.     

Influence of relative humidity on fracture toughness of rock: Implications for subcritical crack growth

Information relating to the fracture toughness of geomaterials is critical to our understanding of tensile fracturing, and in particular in geological and rock engineering projects that are subjected to elevated moisture levels. In this study, we conducted a comprehensive set of fracture toughness tests on a suite of key rock types in air under different relative humidities and at constant temperature in order to investigate the influence of relative humidity on fracture toughness. Three sandstones and two igneous rocks were chosen for this purpose. We show that the value of fracture toughness decreases with increasing relative humidity. In addition, we find that the decrease in fracture toughness was more significant when the expansive clay such as smectite was included in rock. Since smectite is prone to expanding in the presence of water, the strength and thus crack growth resistance decrease when relative humidity is high. Therefore, we interpret the decreasing fracture toughness upon the degradation of expansive clays with increasing water content. It was also shown that the decrease of the fracture toughness with increasing humidity is less significant than the concomitant decrease in the measured value of the subcritical stress intensity factor. This was likely as a result of stress corrosion having little influence on the fracture toughness. We conclude that crack growth in rock is affected by humidity, and that clay content is an important contributing factor to changes in fracture toughness and subcritical stress intensity factor.