Cellulose acetate butyrate as multifunctional additive for poly(butylene succinate) by melt blending: Mechanical properties, biomass carbon ratio, and control of biodegradability

We have evaluated the plasticizing effect of poly(butylene succinate) (PBS) and cellulose acetate butyrate (CAB). PBS and CAB were mixed with a melt-kneading machine. The tensile strength and strain at break in the case of the blend with 10% CAB in the PBS matrix were 547% and 35 MPa. It showed that CAB acted as a plasticizer for PBS. The biomass carbon ratio of the blends measured by accelerator mass spectrometry based on ASTM D6866 showed that the biomass carbon derived from a part of the CAB corresponded to the theoretical value of the polymer blend. The biodegradation of PBS with the CAB melt blend powders was evaluated by a microbial oxidative degradation analyzer under controlled compost conditions based on ISO 14855-2. PBS with 10% CAB was not degraded within 60 days due to the addition of CAB that could control the biodegradability of the PBS.     

Chirality effects on core-periphery connection in a star-burst type tetranuclear Ru(III) complex: application of vibrational circular dichroism spectroscopy

Vibrational circular dichroism (VCD) spectroscopy was applied to study the stereochemical properties of a star-burst type tetranuclear Ru(III) complex, Δ-(or Λ-)[{Δ-(or Λ-)-Ru(III)(acac)(2)(taet)}(3)Ru(III)] (acac = acetylacetonato; taet = tetraacetylethanato). By comparing the VCD spectra of eight diastereomeric enantiomers, it was shown that the spectra reflected the homo- or hetero-chiral nature of the bridging part connecting the central core and the peripheral region.     

The rotational spectrum of the NiI radical in the X 2Delta(5/2) and A 2Pi(3/2) states

The millimeter- and submillimeter-wave spectra of the NiI radical in the X (2)Delta(5/2) and A (2)Pi(3/2) states were observed by a source-modulated microwave spectrometer. The NiI radical was generated by a dc glow discharge in the mixture of CH(3)I vapor and Ar gas through the sputtering reaction with a Ni cathode. Observed transition frequencies for each electronic state were independently analyzed using a polynomial energy expression based on Hund's case (c) approximation. The deperturbed rotational constants were also estimated by the perturbation analysis including interaction terms between the ground state and the lowest excited state.     

Effective PCR detection of animal species in highly processed animal byproducts and compound feeds

In this paper we present a polymerase chain reaction (PCR)-based method for detecting meat and bone meal (MBM) in compound feedingstuffs. By choosing adequate DNA targets from an appropriate localisation in the genome, the real-time PCR method developed here proved to be robust to severe heat treatment of the MBM, showing high sensitivity in the detection of MBM. The method developed here permits the specific detection of processed pig and cattle materials treated at 134 °C in various feed matrices down to a limit of detection of about 0.1%. This technique has also been successfully applied to well-characterised MBM samples heated to as high as 141 °C, as well as to various blind feed samples with very low MBM contents. Finally, the method also passed several official European ring trials.     

Biobased contents of biodegradable poly(epsilon-caprolactone) composites polymerized and directly molded using aluminium triflate from caprolactone with cellulose and inorganic filler

Poly(epsilon-caprolactone) (PCL) composite samples were prepared by polymerization and direct molding. The starting compound was epsilon-caprolactone monomer liquid combined with cellulose and inorganic fillers, using aluminium triflate as a catalyst at 80 degrees C, for 6 or 24 h. Cylinder-shaped PCL composite samples with a homogeneously dispersed cellulose filler were prepared with (-)M(n) = 4 600 ((-)M(w)/(-)M(n) = 2.9). The mechanical properties of the PCL composite samples were studied using compression test methods. The strength of a PCL composite with 50 wt.-% cellulose filler (10.8 MPa) was found to be lower than the PCL sample without fillers (19.2 MPa). The biobased content of the PCL composite with 50 wt.-% cellulose filler (51.67%) measured using accelerated mass spectrometry (AMS) was slightly higher than the carbon ratio of cellulose in the starting powder samples (41.3 mol-%). The biobased content of the polymer composite powders by AMS was found not to be affected by the presence of inorganic fillers, such as talc. The rate and extent of biodegradation, caused by Amano Lipase PS, of the PCL composite sample with cellulose filler (40% degradation in 4 d) was the same as that of a PCL sample without the cellulose filler.     

Comments on some recent phenomenological potentials for the alkali halide crystals

Some comments are presented on three phenomenological potentials for the alkali halide crystals proposed in recent years by Narayan and Ramaseshan, by Woodcock, and by Romano, Margheritis and Sinistri. In the context a brief comment is made on the van der Waals coefficients reported by Hajj.     

Discriminating animal fats and their origins: assessing the potentials of Fourier transform infrared spectroscopy,gas chromatography,immunoassay and polymerase chain reaction techniques

The objective of the reported study was to assess the abilities of various methods to differentiate the sources of fats used in feedstuff formulations. The main target was the identification of tallow (ruminant fat) and its differentiation from non-ruminant fats. Four different techniques were compared in terms of their suitability for enforcing existing and upcoming legislation on animal by-products: (1) Fourier transform infrared spectroscopy (FT-IR) applied to fat samples, (2) gas chromatography coupled with mass spectrometry (GC–MS) to determine fatty acid profiles, (3) immunoassays focusing on the protein fraction included in the fat, and (4) polymerase chain reaction (PCR) for the detection of bovine-specific DNA. Samples of the different fats and oils as well as mixtures of these fats were probed using these analytical methods. FT-IR and GC–MS differentiated pure fat samples quite well but showed limited ability to identify the animal species or even the animal class the fat(s) belonged to; no single compound or spectral signal that could permit species identification could be found. However, immunoassays and PCR were both able to identify the species or groups of species that the fats originated from, and they were the only techniques able to identify low concentrations of tallow in a mixture of fats prepared by the rendering industry, even when the samples had been sterilised at temperatures >133 °C. Fats used in animal nutrition come mainly from the rendering industry, thereby confirming the suitability of PCR and immunoassays for their identification. However, neither of these latter techniques was able to detect premier jus tallow, representing the highest quality standard of fat with extremely low protein concentration.     

Selective formation of stable triplexes including a TA or a CG interrupting site with new bicyclic nucleoside analogues (WNA)

Triplex-forming oligonucleotides (TFOs) are potential DNA-targeting molecules and would become powerful tools for genomic research. As the stabilization of the TFO is partially provided by hydrogen bonds to purine bases, the most stable triplexes form with homopurine/homopyrimidine sequences, and a pyrimidine base in the purine strand of the duplex interrupts triplex formation. If a TFO can recognize sequences including such an interrupting site, the target regions in the genome would be expanded to a greater extent. However, this problem has not been generally solved despite extensive studies. We have previously reported a new base analogue (WNA) constructed of three parts, a benzene ring, a heterocyclic ring, and a bicyclic skeleton to hold these two parts. In this study, we have further investigated modification of WNA systematically and determined two useful WNA analogues, WNA-beta T and WNA-beta C, for selective stabilization of triplexes at a TA and a CG interrupting site, respectively. The triplexes with WNA analogues have exhibited an interesting property in that they are more stable than natural-type triplexes even at low Mg(2+) concentration. From comparison of the results with H-WNA-beta T lacking benzene and those with WNA-H without thymine, it has been suggested that benzene is a major contributor for triplex stability and thymine provides selectivity. Thus, it has been successfully demonstrated that WNA-beta T/TA and WNA-beta C/CG combinations may expand triplex recognition codes in addition to the natural A/AT and G/GC base triplet codes. The results of this study will provide useful information for the design of new WNA analogues to overcome inherent problems for further expansion of triplex recognition codes.     

Sequence- and base-specific delivery of nitric oxide to cytidine and 5-methylcytidine leading to efficient deamination

Nitric oxide (NO) is an important endogenous regulatory molecule, and S-nitrosothiols are believed to play a significant role in NO storage, transport, and delivery. On the basis of their ability to generate NO in vivo, S-nitrosothiols can be used as therapeutic drugs. In this study, we have developed an innovative method for sequence- and base-specific delivery of NO to a specific site of DNA followed by specific deamination. We designed a NO transfer reaction from S-nitroso thioguanine to an imino tautomer of cytosine. Nitrosation of the thioguanosine-containing ODN 1 was carried out with S-nitroso-N-acetylpenicillamine (SNAP) to produce ODN 2. An interstrand NO transfer reaction was performed using ODN 2 and its complementary ODN 3 having dC or dmC at the target site, and a rapid NO transfer reaction was observed. In contrast, a transfer reaction was not observed either with ODN 3 having dT, dA, or dG at the target site or with ODN 5-7 having dC at a nontarget site. In the analysis of deaminated products of the NO-transferred ODN 4, it was found that the transformation ratio from dmC to dT was as high as 42% together with the dmC-diazoate (13%). In conclusion, we have demonstrated the innovative method of sequence- and base-specific delivery of nitric oxide to cytidine and 5-methylcytidine. The selectivity and efficiency of NO transfer followed by deamination exhibited in this study are extremely high compared to those of the conventional methods.