A new polymorph of barium chloro­anilate trihydrate

Single crystals of a new polymorph of the title compound, barium(II) 3,6-di­chloro-2,5-di­hydroxy-1,4-benzo­quinone tri­hydrate, Ba²⁺·C₆Cl₂O₄²⁻·3H₂O, have been grown in sodium metasilicate gel. Each Ba²⁺ cation is coordinated by eight O atoms. The Ba²⁺ cations are bridged by an O atom of a ligand around the centre of symmetry at Wyckoff position 4a and by the O atom of a water mol­ecule around the centre of symmetry at Wyckoff position 4b, forming a sheet parallel to the (100) plane. Loose contacts are found around one of the water mol­ecules, as observed in the Cmca form.     

Structural analysis of polyelectrolyte film absorbing metal ion by SAXS utilizing with X-ray anomalous dispersion effect

A distribution of Cu ions in polyelectrolyte film (Nafion) is directly observed with a small-angle X-ray scattering (SAXS) method utilizing an X-ray anomalous dispersion effect. A partial structure factor of the Cu ions, GAA(q), can be derived from the SAXS profiles obtained by scanning the incident X-ray energy around the Cu K absorption edge. GAA(q) has two peaks, indicating that the Cu ions hierarchically distribute in Nafion film. In addition, a standard SAXS also shows that Nafion film has a hierarchical structure. These results mean that the Cu ions locate in the domain where the hydrophilic bases aggregate.     

A Model for Simultaneous Homogeneous and Heterogeneous Nucleation in the Case of Slow Reaction Rate

(Gd(x)Y(1-x))(2)O(3):Eu [x=0, 0.25, 0.5, 0.75, 1.0] phosphor particles with 6 at.% Eu dopant of total concentration were prepared using spray pyrolysis. The effects of composition on the morphology, crystallinity, and photoluminescence characteristics of composite particles were investigated. The morphological control of (Gd(x)Y(1-x))(2)O(3):Eu particles in spray pyrolysis was also attempted by using colloidal and aqueous solutions. The particles prepared from colloidal solutions containing small amounts of Gd or Y hydroxy carbonate sol as seed material had spherical and filled morphology after the post-treatment at high temperature. On the other hand, the (Gd(x)Y(1-x))(2)O(3):Eu particles prepared from aqueous solutions were hollow and porous after post-treatment in all compositions. Particles prepared from colloidal solutions had photoluminescence emission intensities higher than those of particles prepared from aqueous solutions. Copyright 2000 Academic Press.     

Kinetic and ESR studies on radical polymerization of methyl methacrylate in the presence of fullerene

The effect of fullerene (C₆₀) on the radical polymerization of methyl methacrylate (MMA) in benzene was studied kinetically and by means of ESR, where dimethyl 2,2′-azobis(isobutyrate) (MAIB) was used as initiator. The polymerization rate (R_p) and the molecular weight of resulting poly(MMA) decreased with increasing C₆₀ concentration ((0–2.11) × 10⁻⁴ mol/L). The molecular weight of polymer tended to increase with time at higher C₆₀ concentrations. R_p at 50°C in the presence of C₆₀ (7.0 × 10⁻⁵ mol/L) was expressed by R_p = k[MAIB]^0.5[MMA]^1.25. The overall activation energy of polymerization at 7.0 × 10⁻⁵ mol/L of C₆₀ concentration was calculated to be 23.2 kcal/mol. Persistent fullerene radicals were observed by ESR in the polymerization system. The concentration of fullerene radicals was found to increase linearly with time and then be saturated. The rate of fullerene radical formation increased with MAIB concentration. Thermal polymerization of styrene (St) in the presence of resulting poly(MMA) seemed to yield a starlike copolymer carrying poly(MMA) and poly(St) arms. The results (r₁ = 0.53, r₂ = 0.56) of copolymerization of MMA and St with MAIB at 60°C in the presence of C₆₀ (7.15 × 10⁻⁵ mol/L) were similar to those (r₁ = 0.46, r₂ = 0.52) in the absence of C₆₀. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2905–2912, 1998     

Synthesis of Sialyl-α-(2→3)-Neolactotetraose Derivatives Containing Different Sialic Acids: Molecular Probes for Elucidation of Substrate Specificity of Human α1,3-Fucosyltransferases

ABSTRACT

A series of sialyl-α-(2→3)-neolactotetraose derivatives containing N-acetyl-(NeuAc), N-glycolyl- (NeuGc) and N-butanoylneuraminic acid, and 3-deoxy-D-glycero-D-galacto-2-nonulosonic acid (KDN) have systematically been synthesized as molecular probes for elucidation of substrate specificity of human α1,3-fucosyltransferases (Fuc-TVII and Fuc-TVI). 2-Methyl-(3,4,6-tri-O-acetyl-1,2-dideoxy-α-D-glucopyrano)-[2',1':4,5]-2-oxazoline (1) was coupled with 2-(trimethylsilyl)ethyl (2,4,6-tri-O-benzyl-β-D-galactopyranosyl)-(1 → 4)-2,3,6-tri-O-benzyl-β-D-glucopyranoside (2) to give a trisaccharide 3 which, upon successive O-deacetylation, benzylidenation and reductive opening of the benzylidene group, afforded a common glycosyl acceptor 5. Glycosylation of 5 with sialyl-α-(2→3)-galactose donors 6-8, 19 and 21 gave the corresponding pentasaccharides 22-25, which were converted to a series of sialyl-α-(2→3)-neolactotetraose derivatives 30-33. In the competitive enzyme assay, the NeuGc derivative 32 showed the most potent activity for Fuc-TVII, while the KDN derivative 31 was less active than the standard NeuAc derivative 30. In contrast, the N-butanoylation of neuraminic acid enhanced the activity for Fuc-TVI.     

Structure characterization of CVD amorphous Si3N4 by pulsed neutron total scattering

The structure factor S(Q) of chemically vapor-deposited (CVD) amorphous Si₃N₄ has been measured by pulsed neutron diffraction over the range of the scattering vector Q from 1–330 nm^?1. The oscillatory behavior in the S(Q) persists up to Q = 300 nm^?1 and there is appreciable small angle scattering intensity. The SiN bond length is l_SiN = 0.1729 nm, and its coordination numbers n_SiN and n_NSi are 3.70 and 2.78 respectively. The bond angles around a Si and a N atom are found to be 109.8 and 121°. Analysis of the small angle scattering intensity shows the existence of voids with an average diameter of about 1 nm and a volume fraction of about 4%, which may stabilize the amorphous structure of Si₃N₄ having rigid covalent bonds due to relaxing the strain energy accumulated in the matrix.     

Effects of ultrasonic intensity and reactor scale on kinetics of enzymatic saccharification of various waste papers in continuously irradiated stirred tanks

Based on the enzymatic saccharification of the various pulps in the previous 0.8 l ultrasonic stirred tank reactor, the ultrasound-enhanced saccharification of waste papers such as newspaper, carton paper, office paper etc. was carried out in the same reactor as well as larger scale stirred tank reactors of size 3.2 and 6.4 l. The saccharification of each waste paper was less enhanced in the larger reactor at a given ultrasonic intensity. This could be attributed to the decrease in the ultrasonic intensity per reaction volume, i.e., the specific ultrasonic intensity. Most waste papers were more efficiently hydrolyzed with increasing specific ultrasonic intensities, although newspaper was less efficiently done for a too high specific intensity. Such an adverse effect might be due to the fact that some impurities in the newspaper such as lignin were activated by an intensive ultrasonic irradiation to form a rigid and closed network, which inhibited the access and adsorption of cellulase on to the substrate surface. The previous kinetic model was found to be applicable to analyze and simulate the saccharification of each waste paper in the different ultrasonic reactors. The ultimate conversion of a substrate based on the total sugar concentration estimated for an infinite reaction time could be correlated as a function of the ratio of initial substrate to enzyme concentrations at a fixed specific ultrasonic intensity. Either the apparent rate constant or the ultimate conversion increased and tended to approach a constant with an increase in the specific ultrasonic intensity except for the case of newspaper, while neither the apparent Michaelis constant, product inhibition constant nor glucose formation equilibrium constant was influenced by the specific ultrasonic intensity.     

In-situ Observation of Tissue Laser Ablation Using Optical Coherence Tomography

In laser ablation of biological tissue, tomography of the tissue surface is necessary for measurement of the crater shape and the crater depth. In this paper, we demonstrate in-situ observation of biological-tissue surface in laser ablation by optical coherence tomography (OCT). Depth of a crater of human tooth is measured by these OCT images, and then the ablation rate of 0.21 μm/pulse is determined.     

Phase transformations in Li2WO4 at high pressure

The phase diagram of Li₂WO₄ has been determined at high pressure up to 160 kbars and a temperature of 800°C. Three new high-pressure phases have been found in the present study. Crystallographic data are given for Li₂WO₄ III and Li₂WO₄ IV by means of single crystal and powder X-ray analyses. Li₂WO₄ III is orthorhombic with the large unit cell containing 16 molecules and having the edges: a₀ = 10.12(4) Å, b₀ = 10.07(1) Å, c₀ = 11.68(6) Å. Li₂WO₄ IV has an orthorhombic unit cell with the parameters: a₀ = 4.96(7) Å, b₀ = 9.72(8) Å, c₀ = 5.93(8)Å and Z = 4. The total volume decrease is estimated to be 24.8% through the high pressure transformations in Li₂WO₄. No spinel-like structure could be found in the present study.     

Ammonium hydrogen tartronate at 240 and 20 K

The low-temperature structure determination of the title compound, alternatively called ammonium hydrogen hydroxy­propane­dioate, NH₄⁺·C₃H₃O₅⁻, has revealed that the H atom involved in a very short asymmetric O—H⋯O hydrogen bond [O⋯O = 2.448 (2) Å at 240 K and 2.4393 (10) Å at 20 K] is disordered.