Analysis of the release process of phenylpropanolamine hydrochloride from ethylcellulose matrix granules

The release properties of phenylpropanolamine hydrochloride (PPA) from ethylcellulose (EC, ethylcellulose 10 cps (EC#10) and/or 100 cps (EC#100)) matrix granules prepared by the extrusion granulation method were examined. The release process could be divided into two parts, and was well analyzed by applying square-root time law and cube root law equations, respectively. The validity of the treatments was confirmed by the fitness of the simulation curve with the measured curve. At the initial stage, PPA was released from the gel layer of swollen EC in the matrix granules. At the second stage, the drug existing below the gel layer dissolved, and was released through the gel layer. Also, the time and release ratio at the connection point of the simulation curves was examined to determine the validity of the analysis. Comparing the release properties of PPA from the two types of EC matrix granules, EC#100 showed more effective sustained release than EC#10. On the other hand, changes in the release property of the EC#10 matrix granule were relatively more clear than that of the EC#100 matrix granule. Thus, it was supposed that EC#10 is more available for controlled and sustained release formulations than EC#100.     

Preparation of crystalline polyamides by the alternating copolymerization of aziridines and cyclic imides

The copolymerization of aziridines and cyclic imides was studied. Aziridines copolymerized alternately with cyclic imides to give crystalline polyamides. Ethylenimine and succinimide copolymerized to nylon 2,4, melting near 300°C., without any catalyst. Similarly, the corresponding crystalline polyamides were obtained from the systems of 1,2-propylenimine–succinimide, ethylenimine–glutarimide, and ethylenimine–phthalimide. The copolymerization of aziridines and cyclic imides in the presence of BF₃OEt₂ gave a copolymer which was rich in aziridine units, whereas, the addition of triethylamine had no influence on the copolymer composition. A mechanism of copolymerization was proposed based on the facts that N-tetramethylenesuccinamide was obtained by the reaction of pyrrolidine and succinimide, N-acetylethylenimine reacted with acetamide to yield N,N′-diacetylethylenediamine and that the rate of this copolymerization was dependent on the electrophilicity of imide.     

Kinetics of γ-ray polymerization of formaldehyde in the presence of carbon dioxide

A kinetic study of the γ-ray polymerization of formaldehyde in toluene solution in the presence of carbon dioxide was carried out at temperatures of + 13 to ?17°C. Two modes of the polymerization, spontaneous and γ-ray polymerization, occur in this system. The γ-ray polymerization, experimentally separated from the spontaneous polymerization, was investigated. The rate of γ-ray polymerization increased slightly with the square root of carbon dioxide concentration. The rate of polymerization was also found to be proportional to the dose rate and the square of monomer concentration. The molecular weight of polymer formed was independent of the reaction condition. The apparent activation energy was estimated to be 10.3 kcal./mole. The kinetics of the γ-ray polymerization in the presence of carbon dioxide are explained quantitatively by a cationic mechanism, and the role of carbon dioxide is as an action of retardation for neutralization of the cationic initiating species, which was produced by γ-radiation, by means of a reverse reaction with an electron. Physical and mechanical properties of the polymer obtained by γ-ray polymerization were also investigated.     

Cationic polymerization of formaldehyde in liquid carbon dioxide. Part I

A cationic polymerization of formaldehyde which gave a high molecular weight polymer was studied in liquid carbon dioxide at 20–50°C. In the polymerization without any catalyst both the rate of polymerization and the molecular weight of the resulting polymer increased rapidly with a decrease in the loading density of the monomer solution to the reaction vessel, and also increased with an increase in the initial monomer concentration. From these results it was concluded that the initiating species could be ascribed to an impurity contained in the monomer solution. Both the rate of polymerization and the degree of polymerization of the polymer also increased with rising temperature. The carboxylic acid added acted as a catalyst in the polymerization because of increase in the polymer yield, the molecular weight of polymer formed, and the number of moles of polymer chain with increasing dissociation constant of acid used. It was concluded that the polymerization in liquid carbon dioxide proceeded by a cationic mechanism. Methyl formate had no influence on the polymerization, but methanol and water acted as a chain-transfer agent.     

Palladium-catalyzed preparation of α-allyl esters and α,β-unsaturated esters from saturated esters via their silyl acetals

Reaction of ketene silyl acetals with allylic carbonates in the presence of palladium-phosphine catalyst in dioxane gives α-allyl esters in high yields. When the reaction is carried out with phosphine-free palladium catalyst in nitriles, α,β-unsaturated esters are obtained in good yields.     

Selective CO2 reduction into formate using Ln-Ta oxynitrides combined with a binuclear Ru(Ⅱ)complex under visible light

Hybrid materials constructed from a visible-light-absorbing semiconductor and a functional metal complex have attracted attention as efficient photocatalysts for CO₂ reduction with high selectivity to a desired product.In this work,defect fluorite-type Ln-Ta oxynitrides LnTaO_xN_y(Ln=Nd,Sm,Gd,Tb,Dy and Ho)were examined as the semiconductor component in a hybrid photocatalyst system combined with known Ag nanoparticle promoter and binuclear ruthenium(Ⅱ)complex(RuRu’).Among the LnTaO_xN_y examined,TbTaO_xN_y gave the highest performance for CO₂ reduction under visible light(k>400 nm),with a Ru Ru0-based turnover number of 18 and high selectivity to formate(>99%).Physicochemical analyses indicated that high crystallinity and more negative conduction band potential of Ln Ta O_xN_ywith the absence of Ln-4 f states in the band gap structure contributed to higher activity of the hybrid photocatalyst.     

New Plasmon Waveguides Composed of Twin Metal Wedges with a Nano Gap

We have numerically shown the existence of coupled wedge plasmons (CWPs) which propagates along a nano gap of a twin metal wedge. The CWPs are formed by wedge plasmons which can interact with each other. The dispersion relations of the wavenumber, propagation distance, and beam area of CWPs, are described and show that the characteristics of CWPs are similar to those of wedge plasmons and of gap plasmons. We also propose a new plasmon waveguide composed of twin metal wedges with a nano gap.     

Finding of Optimal Calcium Ion Probes for Fluorescence Lifetime Measurement

We have investigated the fluorescence lifetime properties of 8 calcium ion probes, calcium-green-1, calcium green-2, calcium green-5N, calcium orange, oregon green 488 BAPTA-6F, fluo-3, fluo-4, and fluo-5N. We found that the decay time of calcium green-5N varied more sensitively with calcium concentration than calcium green-1 which was known to be a highly sensitive probe. We have also found that the center of observable range of calcium concentration by fluorescence lifetime measurement is lower than that by fluorescence intensity measurement.     

Snapshot Mueller matrix spectropolarimeter

We present a new snapshot technique for performing spectrally resolved Mueller matrix polarimetry. The basic approach is an extension of the channeled spectropolarimetry technique, employing frequency-domain interferometry to encode polarization information into modulation of the spectrum.     

Mechanically strengthened new Hagi porcelain developed by controlling the chemical environment of iron

In order to enhance the mechanical strength of Hagi Porcelain (Hagiyaki), one of the oldest and famous potteries in Japan, new preparation condition was examined. Tempered Hagi porcelain, denominated as ‘Hagi Porcelain B’, was prepared with the Porcelain clay originating from Daido district, Yamaguchi Prefecture, Japan. Structural change of ‘Hagi Porcelain B’ was investigated by means of ⁵⁷Fe-Mössbauer spectroscopy, X-ray diffractometry (XRD) and three-point bending test. Mechanical strength of the ‘original Hagi Porcelain B’ was estimated to be 43.1 MPa by means of the three-point bending test, while much larger value of 104.5 MPa could be achieved when tempered by a chemical modification. Mössbauer spectrum of the ‘original Hagi porcelain B’ was composed of a paramagnetic doublet and a magnetic sextet due to Fe(III) of γ-Fe₂O₃(maghemite), while only one paramagnetic doublet due to to octahedral Fe(II)O₆ was observed for the ‘tempered Hagi Porcelain B’ with isomer shift and quadrupole splitting values of 1.13 and 2.15 mm s^?1, respectively. It is considered that the absence of magnetic phase causes an increase of the mechanical strength because the maghemite phase has a defect spinel structure. These results indicate that mechanical strength of the ‘Hagi porcelain B’ could be enhanced by controlling the sintering condition.