Extraction and spectrophotometric determination of zinc in coal fly ash and pond sediments with 2-[2-(3,5-dibromopyridyl)azo]-5-dimethylaminobenzoic acid

An extraction-spectrophotometric method is described for the determination of traces of zinc with 2-[2-(3,5-dibromopyridyl)azo]-5-dimethylaminobenzoic acid. The reagent forms a stable, blue 1:2 zinc/reagent complex that can be extracted into chloroform. The apparent molar absorptivity of the zinc(II) complex is 1.26 × 10⁵ l mol^?1 cm^?1 at 610 nm in chloroform. The reagent is relatively selective; interferences from cobalt, copper and nickel can be masked with dimethylglyoxime and aluminium and iron with a mixture of sodium fluoride and triethanolamine. The method is applied to the determination of zinc in coal fly ash and pond sediments with good precision and accuracy.     

Double tracer whole body autoradiography using a short-lived positron emitter and a long-lived beta emitter

We investigated glucose and amino acid metabolism in tumors and other organs using whole body autoradiography with a short-lived positron emitter and a long-lived beta emitter. The radioactive compounds used were 2-deoxy-2-[18F]-fluoro-D-glucose (18F-FDG) with a half life of 109.8 min and L-[methyl-14C]-methionine (14C-MET) with a half life of 5,730 years. A Donryu rat weighing about 150 g was subcutaneously inoculated at the back with experimental tumors of AH109A and AH272. 74 MBq (2 mCi) of 18F-FDG and 740 kBq (20 microCi) of 14C-MET was administered and after 30 min, the rat was sacrificed. Whole body frozen sections were obtained using autocryotome. For the 18F-FDG autoradiogram, the frozen sections were exposed to an X-ray film for 6 h. After seven days, these frozen sections were again exposed to 14C-MET for a week. Cross-contamination was minimized by adjusting the exposure time, the interval of exposures and the administered dose. The accumulation of the tracers was represented as the optical density ratio of the tissue of interest to the muscle. The tumor ratios were 12.5 for 18F-FDG and 8.6 for 14C-MET showing the highest accumulation in the whole body autoradiogram. In contrast the inflammatory tissue ratios were 1.27 for 18F-FDG and 0.77 for 14C-MET showing very low amino acid metabolism. With the present double tracer whole body autoradiogram, 18F-FDG accumulation was seen in the brain and the heart but not to the liver as against 14C-MET accumulation which was seen to the liver but not to the brain and the heart.     

Destabilization of whole skin lipid bio-liposomes induced by skin penetration enhancers and FT-IR/ATR (Fourier transform infrared/attenuated total reflection) analysis of stratum corneum lipids.

Whole skin lipid bio-liposomes (skin bio-liposomes), in size ranging from 2 to 8 microns, were prepared by a reverse phase evaporation technique using rat full thickness skin. Leakage of an encapsulated fluorescence probe, ANTS (delta-amino-1,3,6-naphthalene-trisulfonate), was measured by adding transdermal penetration enhancers (penetrants) into the medium where the skin bio-liposomes were present. Oleylamine induced a fast release of ANTS from the liposomes compared to lauryl-amine which showed a weak action. With these penetrants, the degree of ANTS release from the prepared bio-liposomes was found to correlate well with the results of frequency changes in the CH-asymmetric stretching band near 2920 cm-1 in the rat stratum corneum. The penetrant which caused relatively strong leakage of ANTS induced the significantly large shift of the peak toward the higher wave-numbers due to the perturbation in the structure of lipids of the stratum corneum. The skin bio-liposomes prepared from the rat full thickness skin could be useful in evaluating the penetrants.     

Polymerization of tetrahydrofuran by AlEt3–H2O promoter system: Rate of propagation reaction

Kinetic studies were carried out on the polymerization of tetrahydrofuran with catalyst systems of aluminum alkyl–epichlorohydrin. As aluminium alkyl species AlEt₃, AlEt₃–H₂O (1:0.1 to 1:1.0), and “oxyaluminum ethyl” were employed. The polymerizations with these catalysts are characterized by a mechanism of stepwise addition without chain transfer or termination, which is expressed by the kinetic relation R_p = K_p[P*] ([M]–[M]_e), where [M] and [M]_e are the instantaneous and equilibrium concentrations of monomer and [P*] is the concentration of propagating species calculated from the amount and molecular weight of the product polymer. The determination of the rate constant k_p for these catalysts has shown that the polymerization rate varied considerably with the change of aluminum alkyl species, i.e., with the water-to-aluminum ratio, but the propagation rate constant itself varied very little. The variation of polymerization rate was, therefore, attributed primarily to the differences in concentration of the propagating species, i.e. the efficiency of the catalyst in forming propagating species. The catalyst efficiency was closely related to the acid strength of the aluminum alkyl species, which was estimated from the magnitude of shift of the xanthone carbonyl band in the infrared spectrum of its coordination complex with aluminum alkyl. The maximal catalyst efficiency was attained at about [H₂O]/[AlEt₃] = 0.75.     

A potentiometric microbial sensor based on immobilized escherichia coli for glutamic acid

The sensor consists of immobilized E. coli (which contains glutamate decarboxylase) and a carbon dioxide gas-sensor. Continuous introduction of sample solution into a flow system incorporating the sensor gives a potential which increases until a steady state is reached after 5 min. Measurements can also be made with only a 1- or 3-min introduction period with little loss of sensitivity. Calibration plots of mV measurements vs. logarithmic glutamic acid concentration are linear in the range 100–800 mg l^-1. The sensor is highly selective, stable and reproducible. It has been applied to the determination of glutamic acid in fermentation broths.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.     

Quantitation of the benzodiazepine antagonist flumazenil in human plasma by gas chromatography-mass spectrometry

A gas chromatographic-mass spectrometric procedure has been developed for the quantitation of the benzodiazepine antagonist flumazenil in human plasma. The assay utilizes an extraction at alkaline pH with benzene-dichloroethane (80:20), selective ion monitoring, isobutane positive-ion chemical ionization mass spectrometry and stable isotope dilution. The method has been used to measure plasma concentrations of flumazenil in over 1500 clinical samples over a range of 0.5-200 ng/ml (using 2 ml of plasma).     

The crystal structures of α- and β-CdUO4

The structural parameters of α- and β-CdUO₄ crystals are determined by X-ray powder diffraction technique. α-CdUO₄ is rhombohedral and cell parameters are a = 6.233(3) Å and α = 36.12(5)°. β-CdUO₄ crystallizes in a C-centered orthorhombic cell with a = 7.023(4), b = 6.849(3), c = 3.514 (2) Å. The space groups are $\text{R}\text{3}\text{m}$ for α-CdUO₄ and Cmmm for β-CdUO₄. α-CdUO₄: 1U in (000), 1Cd in ($\text{1}\text{2}\text{1}\text{2}\text{1}\text{2}$), 2O(1) in ±(uuu), 2O(2) in ±(vvv); u = 0.113, v = 0.350, Z = 1. β-CdUO₄: 2U in ($\text{000;}\text{1}\text{2}\text{1}\text{2}\text{0}$), 2Cd in ($\text{1}\text{2}\text{0}\text{1}\text{2}\text{; 0}\text{1}\text{2}\text{,}\text{1}\text{2}$), 4O(1) in ($\text{0, ±y, 0;}\text{1}\text{2}\text{,}\text{1}\text{2}\text{±y, 0}$), 4O(2) in ($\text{±x, 0,}\text{1}\text{2}\text{;}\text{1}\text{2}\text{±x,}\text{1}\text{2}\text{,}\text{1}\text{2}$); x = 0.159, y = 0.278, Z = 2. β-CdUO₄ contains collinear uranyl UO²⁺₂ groups with a UO(1) distance of 1.91 Å, located either along or parallel to the c axis whereas the UO(1) bond length in α-CdUO₄ is 1.98 Å which is longer than the usual uranyl bond length.     

McMullen's conditions and some lower bounds for general convex polytopes

We give a lower bound for the number of vertices of a generald-dimensional polytope with a given numberm ofi-faces for eachi = 0,..., d/2 – 1. The tightness of those bounds is proved using McMullen's conditions. Form greater than a small constant, those lower bounds are attained by simpliciali-neighbourly polytopes.