基于锥面衍射实现高效率双光栅光谱合成

分析了基于锥面衍射的双光栅光谱合成系统的可行性,设计了激光入射角为Littrow角附近的双多层介质膜（MLD）光栅光谱合成系统,开展了两路合成实验。当入射极角等于自准直入射角,入射方位角为6°时,光栅衍射效率近似等于光束自准直入射时的衍射效率。基于锥面衍射原理,对中心波长为1050.24 nm和1064.33 nm的两束光纤激光子束进行合成,入射极角为43.99°,测得合成效率为92.9%,较基于非锥面衍射的双光栅光谱合成系统的合成效率提高了8.8%;测得合成光斑光束质量M_x²＝1.204,M_y²＝1.467,与基于非锥面衍射的双光栅光谱合成系统输出光斑光束质量基本一致。     

Quantum Windowed Fourier Transform and its Application to Quantum Signal Processing

International Journal of Theoretical Physics - In classical information processing, the windowed Fourier transform (WFT), or short-time Fourier transform, which is a variant of the Fourier...     

A Mercury Iodide Adduct with 1,1‐Bis(diphenylphosphino)ferrocene – Synthesis,Crystal Structure,and Nonlinear Refractive Properties

A new mercury iodide complex of dppf, [HgI₂(dppf)] (adduct 1 , dppf = 1,1‐bis(diphenylphosphino)ferrocene) was prepared and characterized. Single crystal X‐ray diffraction analysis established that the compound crystallizes in the monoclinic system, space group C2c, with a = 34.992(3), b = 10.236(5), c = 18.765(4) Å, β = 99.410(2)°, Z = 8, V = 6631.2(9) ų. The coordination about the mercury atom is tetrahedral with two equivalent Hg–I and Hg–P bonds. Dppf functions as a chelating ligand. The nonlinear optical (NLO) properties were studied with an 8 ns‐pulsed laser at 532 nm. Its optical responses to the incident light exhibit weak optical absorptive and strong refractive effects, with n₂ = 6.86 × 10^–18 m² · W^–1 in a 2.48 × 10^–4 mol · dm^–3 DMF solution.     

广义Hénon映射的滑模变结构控制同步

基于可线性化的非线性离散变结构跟踪控制方法实现了广义Hénon映射混沌系统的同步.广义Hénon映射的混沌吸引子比Hénon映射的混沌吸引子要复杂得多,对于保密通信来说,这种复杂性正是所期望的.提出的同步方法允许参数有适当的失配程度,这对工程实现是非常有利的,理论分析和仿真结果证实了该方法的有效性 关键词： 广义Hénon映射 混沌 同步 变结构控制     

微分吸收法测量二极管电压

给出了微分吸收法测量二极管电压的基本原理和实验结果。利用MCNP程序对轫致辐射-衰减-探测器系统建模,模拟得到了输出剂量与二极管工作电压关系拟合曲线。建立了微分吸收法测量二极管电压测量系统,通过在探测器前端放置不同厚度的吸收片,得到了衰减程度不同的波形。结合理论计算的拟合曲线和实验波形,利用迭代法计算得到了晨光号加速器二极管电压,电压峰值为0.58 MV。和传统方法所测得二极管工作电压进行了比较,结果较为一致。     

窗口可变滑动相关分析方法在激光诱导击穿光谱谱线自动识别中的应用

激光诱导击穿光谱(LIBS)谱线具有很窄的展宽,且光谱仪因外界温度条件的变化存在波长漂移,光谱数据为离散数字信号,受噪声、谱线重叠及连续背景的影响,信号存在失真和变形。而目前光谱仪自带谱线识别分析软件主要以"就近原则"为主,错误率较高,必须依赖于人眼的观察对比。针对这个问题,在研究LIBS光谱特性的基础上,提出了一种窗口可变滑动相关分析方法(CAASW),用于激光诱导击穿光谱谱线自动识别。以土壤标准物质为样品,对该方法进行了实验分析和评价,与光谱仪自带分析识别软件相比,CAASW明显提高了识别准确率和识别速度,最终实现了谱线的自动识别。     

纳米Ce1-x(Fe0.5La0.5)xO2-δ固溶体的水热合成及光谱分析

采用水热方法合成Ce1-x(Fe0.5 La0.5)xO2-δ固溶体.利用X射线衍射技术(X-ray diffraction technique,XRD)表征样品的相结构,并对固溶体的晶胞参数进行拟合,通过紫外可见漫反射光谱(UV-Vis diffraction spectrum)及拉曼光谱(Raman spectru...     

超宽带TEM喇叭天线优化设计与实验

针对用于成像雷达系统的超宽带TEM喇叭天线进行了优化设计,兼顾辐射性能、馈入反射和小尺寸条件,采用平滑渐变结构和加载技术代替原设计,增加了低频电流的回流通道,从而改善了天线的低频特性,增强了其定向辐射能力。在理论分析的基础上对其进行了仿真,并按照仿真结果实际制作了一副天线,对天线进行了测试。仿真与实测结果表明:在电压驻波系数小于2时,该天线具有11∶1的阻抗带宽,较强的辐射能力和良好的定性辐射特性,能够满足雷达系统的需求。     

EIS and XPS studies on passive film of AISI 304 stainless steel in dilute sulfuric acid solution

Electrochemical impedance spectroscopy and XPS studies on AISI 304 stainless steel in naturally aerated 0.5 M H₂SO₄ solution were carried out at room temperature. The valuable model of the metal/solution interphase was established, and the reliable equivalent electrical circuits in the solution were presented. The analysis of the chemical composition of passive film on AISI 304 stainless steel was carried out by XPS. The passive film of AISI 304 stainless steel is composed of oxyhydroxides, Fe₂O_3, FeO, Cr₂O₃, NiO, sulfate, sulfite, and sulfide (FeS, NiS). It is reported that the ferrous sulfide film formed on AISI 304 stainless steel in the dilute sulfuric acid solution. The possible process in which sulfuric acid is reduced to sulfite and sulfide is proposed. The galvanic interaction of sulfide inclusions with the base alloy is introduced. Copyright © 2011 John Wiley & Sons, Ltd.