Magnetooptical Property of Sodium Borosilicate Gel-Glass Containing Bi-YIG Fine Particles

Composite materials which consist of ferro- or ferrimagnetic fine particles in a glass matrix are expected to have a large residual magnetization and coercive force because of their fine magnetic domain structure, and has potential for superior magneto-optical properties compared with single or polycrystalline materials. In this study, the sodium borosilicate (NBS) glass containing Bi-substituted yttrium iron garnet (Bi _x Y_3–x Fe₅O₁₂: BiYIG) fine particles, which show a superior magneto-optical effect, was prepared by the sol-gel method. BiYIG fine particles were stable in NBS gel-glass matrix during densification because the sintering temperature (580°C) of NBS gel was low enough to avoid pyrolysis of BiYIG and the reaction between BiYIG fine particles and the matrix. The Faraday rotation angle spectrum of the composite after deducting the contribution of the NBS glass matrix was intermediate between the reported ones of YIG and Bi_0.25YIG polycrystalline thin films. The change of the Faraday rotation angles of the composite with imposing magnetic field showed a hysteresis loop. It was in good agreement with that of the magnetization curve of the composite.     

Electronic structure and reactivity of high-spin iron--alkyl- and--pterinperoxo complexes

The spectroscopic properties and electronic structure of the four-coordinate high-spin [FeIII(L3)(OOtBu)]+ complex (1; L3 = hydrotris(3-tert-butyl-5-isopropyl-1-pyrazolyl)borate; tBu = tert-butyl) are investigated and compared to the six-coordinated high-spin [Fe(6-Me3TPA)(OHx)(OOtBu)]x+ system (TPA = tris(2-pyridylmethyl)amine, x = 1 or 2) studied earlier [Lehnert, N.; Ho, R. Y. N.; Que, L., Jr.; Solomon, E. I. J. Am. Chem. Soc. 2001, 123, 12802-12816]. Complex 1 is characterized by Raman features at 889 and 830 cm-1 which are assigned to the O-O stretch (mixed with the symmetric C-C stretch) and a band at 625 cm-1 that corresponds to nu(Fe-O). The UV-vis spectrum shows a charge-transfer (CT) transition at 510 nm from the alkylperoxo pi v* (v = vertical to C-O-O plane) to a d orbital of Fe(III). A second CT is identified from MCD at 370 nm that is assigned to a transition from pi h* (h = horizontal to C-O-O plane) to an Fe(III) d orbital. For the TPA complex the pi v* CT is at 560 nm while the pi h* CT is to higher energy than 250 nm. These spectroscopic differences between four- and six-coordinate Fe(III)-OOR complexes are interpreted on the basis of their different ligand fields. In addition, the electronic structure of Fe-OOPtn complexes with the biologically relevant pterinperoxo ligand are investigated. Substitution of the tert-butyl group in 1 by pterin leads to the corresponding Fe(III)-OOPtn species (2), which shows a stronger electron donation from the peroxide to Fe(III) than 1. This is related to the lower ionization potential of pterin. Reduction of 2 by one electron leads to the Fe(II)-OOPtn complex (3), which is relevant as a model for potential intermediates in pterin-dependent hydroxylases. However, in the four-coordinate ligand field of 3, the additional electron is located in a nonbonding d orbital of iron. Hence, the pterinperoxo ligand is not activated for heterolytic cleavage of the O-O bond in this system. This is also evident from the calculated reaction energies that are endothermic by at least 20 kcal/mol.     

Total synthesis of (+/-)-alpha- and beta-lycoranes by sequential chemoselective conjugate addition-stereoselective nitro-Michael cyclization of an omega-nitro-alpha,beta,psi,omega-unsaturated ester

[reaction: see text] An omega-nitro-alpha,beta,psi,omega-unsaturated ester underwent a chemoselective conjugate addition of a nitroolefin moiety with aryllithium to produce a psi-aryl-omega-nitro-alpha,beta-unsaturated ester, which was then stereoselectively cyclized by intramolecular nitro-Michael reaction giving a functionalized cyclohexane applicable to the total synthesis of (+/-)-alpha- and beta-lycoranes.     

Pressure and temperature effects on the excess deuteron and proton conductance

The limiting molar conductances ° of deuterium chloride DCl in D₂O were determined as a function of pressure and temperature in order to examine the proton-jump mechanism in detail. The excess deuteron conductances °_E(D ⁺), as estimated by the equation [°_E(D ⁺) = °(DCl/D ₂ O) – °(KCl/D ₂ O)], increases with an increase in the pressure and temperature as well as the excess proton conductance [°_E(H ⁺) = °(HCl/H ₂ O) – °(KCl/H ₂ O)]. The isotope effect on the excess conductances, however, depends on the pressure and temperature contrary to the model proposed by Conway et al.: °_E(H ⁺)/°_E(D ⁺) decreases with increasing pressure and temperature. The magnitude of the decrease with pressure becomes more prominent at lower temperature. These results are discussed in terms of the pre-rotation of adjacent water molecules, the bending of hydrogen bonds with pressure, and the difference in strength of hydrogen bonds between D₂O and H₂O.     

Gas-stirred solvent extraction with propylene carbonate for separation and direct polarographic determination of thallium (III)

Gas-stirred propylene carbonate (PC) extraction can be performed by bubbling nitrogen without loss of volume. This extraction technique has proved to be highly useful for the separation and subsequent direct polarographic estimation of Tl(III) in the recovered PC phase. Tl(III) can be determined by differential-pulse polarography over the concentration range of 0.4 10 g ml^–1 without any interferences due to most metal ions such as Pb(II), Bi(III), Cu(II), Sb(III) and As(III). This proposed technique would be possible to use as a simple extraction step prior to the final estimation by instrumental method of analysis such as atomic absorption spectrometry or spectrophtometry.     

Synthesis of pyrido[1′,2′:1,2]imidazo[4,5-b]quinoxalines

Synthesis of pyrido[1′,2′:1,2]imidazo[4,5-b]quinoxalines by the facile cyclizations of 2,3-dichloroquinoxalines with 2-aminopyridines and of 2-amino-3-chloroquinoxalines with various substituted pyridines is described.     

ALL-trans β-CAROTENE-5,6-EPOXIDE IN THYLAKOID MEMBRANES

All- trans β-carotene-5,6-epoxide has been found in the thylakoid membranes of spinach and of the cyanobacterium Synechococcus vulcanus Copeland. The epoxide was extracted from the thylakoid membranes with acetone, and was isolated by high-performance liquid chromatography (HPLC). The structure of the epoxide was identified by means of mass, Raman, and electronic absorption spectroscopy. Changes in the amount of the epoxide, as a result of epoxidation and (apparent) de-epoxidation reactions in the membranes, were traced by analysis of extracts on HPLC. In isolated thylakoid membranes, only the epoxidation reaction took place. The reaction was caused by irradiation or by the addition of ferricyanide, suggesting that electron transport reactions in the membranes are involved in the epoxidation. In intact spinach leaves, however, both epoxidation and de-epoxidation took place; the extent of epoxidation correlated with the intensity of light incident on the leaves. The epoxidation and de-epoxidation of all- trans β-carotene are contrasted with those of xanthophylls (in the violaxanthin cycle).     

Determination of l-lactate by differential pulse polarography with covalently immobilized enzyme on Chitopearl

Summary The covalent bonding of l-lactate oxidase (no E.C.) to cross-linked copolymers of chitosan (Chitopearl) using the glutaraldehyde method is described and applied to the determination of l-lactate in serums of diseased and normal animals. The bioreactor packing of the immobilized enzyme is stable for at least 4 months and can be continuously used for the rapid and simple determination of l-lactate. The reduction current of pyruvate, corresponding to the product of enzymatic reaction, is determined by differential pulse polarography. The reproducibility (RSD) for 10 mol/l l-lactate is 0.78% (n=6) and the detection limit is 0.62 mol/l (k=2, confidence level 97.72%).     

Synthesis and properties of furo[4,3,2-de][1]benzopyran

A new heterocycle, furo[4,3,2-de][1]benzopyran ( 2 ), was synthesized. A key step in the sequence was the allylic bromination of 3,4-dihydrofuro[4,3,2-de][1]benzopyran ( 8 ) to give 3-bromo-3,4-dihydrofuro[4,3,2-de][1]-benzopyran ( 10 ) using N-bromosuccinimide under irradiation and high dilution conditions. Bromide 10 was dealt with 1,8-diazabicyclo[5.4.0]undec-7-ene to afford compound 2 . Several reactions of 2 were examined. Protonation of 2 in trifluoroacetic acid occurred at the 2-position to form a pyrylium ion 12 . Catalytic hydrogenation of 2 with palladium on charcoal proceeded smoothly to give 8 . Reduction of 2 by sodium and ethanol afforded 3-ethyl-4-hydroxybenzofuran ( 14 ). Electrophilic substitutions of 2 such as formylation, acetylation, and bromination, occurred easily at the 2-position. The above results show that compound 2 has both properties of benzofuran and 4-methylenepyran.     

The structure of enopeptins A and B, novel depsipeptide antibiotics

The structures of enopeptins A and B, novel depsipeptide antibiotics with 1,3,5,7,9-decapentaene-1,10-dicarboxylic acid and 2-amino-3-hydroxycyclopent-2-enone in a side chain, were determined by chemical and spectroscopic means.