N,N′,N″—三(对—甲苯磺酰基)二亚乙基三胺的合成

二亚乙基三胺与对—甲苯磺酰氯在碳酸钾存在下,发生对甲苯磺酰化反应,生成N,N′,N″-三(对—甲苯磺酰基)二亚乙基三胺,产率96％。考察影响反应的几个因素。     

Preparation of “pore-fill” type Pd–YSZ–γ-Al2O3 composite membrane supported on α-Al2O3 tube for hydrogen separation

Mesoporous YSZ–γ-Al₂O₃ membranes were coated on α-Al₂O₃ (Ø2 mm) tube by dipping the α-Al₂O₃ support tube into mixed sol consists of nano-size YSZ and bohemite particles followed by drying and calcination at 600 °C. Addition of bohemite in YSZ sol helped a good adhesion and uniform coating of the membrane film onto α-Al₂O₃ support. The quality of the mesoporous YSZ–γ-Al₂O₃ membranes was evaluated by the gas permeability experiments. The number of defects was minimized when the γ-Al₂O₃ content became more than 40%. Addition of γ-Al₂O₃ inhibited the crystal growth of YSZ, sintering shrinkage and distortion stress. Increase of calcination temperature and time results in the increase of pore size and N₂ permeance. A hydrogen perm-selective membrane was prepared by filling palladium into the nano-pores of YSZ–γ-Al₂O₃ layer by vacuum-assisted electroless plating. Crystal growth of palladium was observed by thermal annealing of the membrane at 600 °C for 40 h. The Pd–YSZ–γ-Al₂O₃ composite membrane revealed improved thermal stability allowing long-term operation at elevated temperature (>500 °C). This has been attributed to the improved fracture toughness of YSZ–γ-Al₂O₃ layer and matching of thermal expansion coefficient between palladium and YSZ. Although fracture of the membrane did not occur, decline of H₂ flux was observed when the membrane was exposed in 600 °C. This has been attributed to the agglomeration of palladium particles by crystal growth and dense packing into the pore networks of YSZ–γ-Al₂O₃ by elevation of temperature.     

Thermal properties and solubility of ordered aromatic polyamides containing a methyl-substituted phenylene linkage

Ordered aromatic polyamides and copolyamides were prepared by the polycondensation of terephthaloyl and isophthaloyl dichlorides with symmetrical diamines containing preformed amide linkages derived from unsymmetrical methyl—substituted aromatic diamines at low temperature. Thermal properties and solubilities of the ordered polyamides were compared with those of the corresponding random polyamides. There was little difference between thermal stabilities of the ordered polyamide and the corresponding random one, while the former was less soluble in organic solvents than the latter, depending on the extent of hydrogen bonding of the amide groups. The thermal stability of the alternating copolyamides containing both terephthaloyl and isophthaloyl groups as acid components was less than that of the corresponding homopolymers having either a terephthaloyl or an isophthaloyl group, and the solubility of the former resembled that of the corresponding ordered homopolysiophthalamides in accord with the extent of hydrogen bonding of the amide groups in both polymers.     

The β‐silicon effect. 4: substituent effects on the solvolysis of 1‐alkyl‐2‐(aryldimethylsilyl)ethyl trifluoroacetates

Solvolysis rates of 2‐(aryldimethylsilyl)‐1‐methylethyl and 2‐(aryldimethylsilyl)‐1‐tert‐butylethyl trifluoroacetates were determined conductimetrically in 60% (v/v) aqueous ethanol. The effects of aryl substituents at the silicon atom on the solvolysis rates at 50 °C were correlated with parameters of r⁺ = 0.15 with the Yukawa–Tsuno equation, giving ρ values of ?1.5 for both secondary α‐Me and α‐tert‐Bu systems. The ρ values for those secondary systems are less negative than ?1.75 for the 2‐(aryldimethylsilyl)ethyl system that proceeds by the Eaborn (non‐vertical) mechanism, while they are distinctly more negative than ?0.99 for 2‐(aryldimethylsilyl)‐1‐phenylethyl system that should proceed by the Lambert (vertical) mechanism. There was a fairly linear relationship between the reaction constants (ρ) for the β‐silyl substituent effects and the solvolysis reactivities for a series of β‐silyl substrates. The solvolyses of the α‐Me and tert‐Bu substrates proceed through the transition state (TS) with an appreciable degree of the β‐silyl participation, close to the Eaborn (non‐vertical) TS rather than to the Lambert (vertical) TS. Copyright © 2010 John Wiley & Sons, Ltd.     

根霉胞外羧甲基纤维素酶和β－葡糖苷酶的纯化研究

采用柱层析等步骤纯化了根霉Ｇ７的羧甲基纤维素酶及β－葡糖苷酶，回收率分别为４．５％和１９．６％．二种酶的最适酶反应温度都为５５°Ｃ，并都能在较大ｐＨ范围内保持稳定，其中羧甲基纤维素酶具有很高的耐热性，在１００°Ｃ水浴中保持１ｈ也仍可检测出约２０％的酶活性，最适反应ｐＨ为７．０～７．５；而β－葡糖苷酶的热稳性较差，其最适反应ｐＨ为５．０．该两种酶的分子量分别为２．５×１０４和９．５×１０４，而Ｋｍ值则分别为７．４０ｍｇｍＬ－１和０．２１３ｍｇｍＬ－１．     

Synthesis and polymerization of N-[1-(1-substituted-2-oxopropyl)]acrylamides and -methacrylamides. copolymerization of these monomers with styrene and substituent effects

The synthesis and polymerization of N-[1-(1-substituted-2-oxopropyl)]acrylamides and -methacrylamides are described. Seven new monomers were prepared by two kinds of synthetic procedure. The polymerization of these monomers was carried out. Monomer reactivity ratios in the polymerization of these monomers with styrene were determined and the Alfrey-Price Q and e values calculated. The effects of substituents on the reactivities in copolymerization were observed, and an interpretation of the results is given.     

A facile synthesis of fused spiroketal skeleton: 2,2′-spirobi(4-aryl-7,7-dimethyl-5-oxo-5,6,7,8-tetrahydrochroman)

A one-pot synthesis of fused spiroketal skeleton, 2,2′-spirobi(4-aryl-7,7-dimethyl-5-oxo-5,6,7,8-tetrahydrochroman) 4a-c, has been achieved for the first time by an application of Michael reaction between dimedone (5,5-dimethylcyclohexan-1,3-dione) 1 and trans,trans-diarylideneacetone (1,5-diaryl-1,4-pentadien-3-one) 2 using anhydrous ZnCl₂ as catalyst. The spiroketalization was achieved efficiently via intramolecular cyclization of the Michael 1:2 adduct.     

A Novel Layered Silicate with a Helical Morphology

Helices composed of stacked layers are present in the novel silicate obtained from a silica sol and NaOH by hydrothermal synthesis in the presence of tetramethylammonium (TMA) hydroxide and 1,4-dioxane. The helical morphology is evident in scanning electron micrographs (see picture). The TMA and sodium ions of the silicate are readily replaced by protons, and on heating to 200°C a reversible phase transition occurs in which water molecules are lost from between the layers.     

Photodegradation of some ethylene-norbornene random copolymers

We investigated the photodegradation of specific ethylene-norbornene random copolymers (ENRC) - a group of substances which has been attracting much attention in recent years. ENRCs having various contents of norbornene were studied. After irradiation, each sample was separated into chloroform-insoluble and soluble portions. The chloroform-insoluble portion was weighed and analyzed by FTIR. The chloroform-soluble portion was analyzed by size elimination chromatography (SEC), FTIR and ¹H NMR. The yield of the chloroform-insoluble portion increased with increased irradiation time. Formyl, formate, acyl, hydroxy groups and a carbon-carbon double bond were formed by photo-irradiation. Apparently, hydrogen atoms bound to the tertiary and secondary carbon atom in the parent ENRCs are abstracted. From these results, it is suggested that auto-oxidation results from photo-irradiation of the ENRCs. In ENRCs with similar stereoregularity, the degree of photodegradation increases with increasing norbornene content.     

Synthesis of protein-silica hybrid hollow particles through the combination of protein catalysts and sonochemical treatment

Hollow spherical particles with protein-silica hybrid shell structures have been synthesized through a combination of the catalytic activity of the protein and sonochemical treatment; the morphologies of the particles were controlled by varying the protein concentration.