根霉胞外羧甲基纤维素酶和β－葡糖苷酶的纯化研究

采用柱层析等步骤纯化了根霉Ｇ７的羧甲基纤维素酶及β－葡糖苷酶，回收率分别为４．５％和１９．６％．二种酶的最适酶反应温度都为５５°Ｃ，并都能在较大ｐＨ范围内保持稳定，其中羧甲基纤维素酶具有很高的耐热性，在１００°Ｃ水浴中保持１ｈ也仍可检测出约２０％的酶活性，最适反应ｐＨ为７．０～７．５；而β－葡糖苷酶的热稳性较差，其最适反应ｐＨ为５．０．该两种酶的分子量分别为２．５×１０４和９．５×１０４，而Ｋｍ值则分别为７．４０ｍｇｍＬ－１和０．２１３ｍｇｍＬ－１．     

Resonance effect in solvolysis of 1-methylbenzyl chlorides

Substituent effects of p-MeO and p-MeS groups deactivated by additional m-substituents in cumyl and α-phenylethyl solvolyses were studied to provide evidence for the higher resonance demand in the α-phenylethyl system.     

Structure of TiO2 in TiO2-SiO2 prepared by a complexing agent-assisted sol-gel procedure

Many types of TiO₂-SiO₂ (Ti:Si=50:50 mol%) were prepared by the sol-gel procedure with and without 2-methyl-2, 4-pentanediol (MPD) as an organic ligand. The effect of MPD on the gel structure and the properties of the TiO₂ crystals were studied by XRD and raman spectroscopy, and the effect of the sol standing time on the properties of the TiO₂ crystals were also studied by XRD spectroscopy. In the gels with MPD, anatase of TiO₂ appeared at approximately 580°C, and the crystal structures were similar despite the difference in the gel preparation procedure. The titania gels with MPD were presumed to be dispersed in the silica gel matrix without any Ti-O-Si bond. In the presence of MPD, the formation of titania gels is controlled and the specified TiO₂ crystal is produced.     

Concurrent induction of two chiral centers from symmetrical 3, 4-disubstituted and 3,3,4-trisubstituted 4-pentenals using Rh-catalyzed asymmetric cyclizations

Asymmetric cyclization of symmetrical 3,4-disubstituted and 3,3, 4-trisubstituted 4-pentenals was studied using Rh-complexes with chiral ligands. The cyclization of symmetrical 4-pentenals 4a,b by a neutral Rh[(R)-BINAP]Cl afforded cis-3,4-disubstituted (4R)-cyclopentanones 9a,b of >95% ee in 25-31% yields; on the other hand, the cyclization of 4a-c by a cationic Rh[(R)-BINAP]ClO(4) afforded trans-3,4-disubstituted (4S)-cyclopentanones 10a-c of >95% ee in 70-81% yields. All stereoisomers could be stereoselectively made by the selection of a neutral or cationic Rh-complex, and (R)- or (S)-BINAP ligand. The Rh-catalyzed cyclization could be applied to the construction of cyclopentanones 17 and 18 bearing a chiral quaternary carbon. The cyclization by the cationic Rh[(R)-BINAP]ClO(4) afforded the optically active trans-3,3, 4-trisubstituted cyclopentanones 18a-c of 92-95% ee in 75-83% yields. The catalytic cycle was also studied by using deuterium aldehyde, and the tentative mechanisms of the enantio- and diastereoselection were proposed.     

Preparation of boron-doped semiconducting diamond films using BF3 and the electrochemical behavior of the semiconducting diamond electrodes

Boron-doped semiconducting diamond films were prepared using BF₃ by microwave plasma assisted chemical vapor deposition. B-doping was confirmed by SIMS and Raman spectroscopic measurements and the B-doping levels were estimated. Electrochemical behaviors of boron-doped diamond thin-film electrodes prepared using B₂H₆ and BF₃ were studied by measuring cyclic voltammograms for anodic oxidation of 1,4-difluorobenzene in the liquid electrolyte, neat Et₄NF·4HF. The results of the direct thermal interaction of elemental fluorine with hydrogenated and oxidized diamond surfaces are also presented.     

Synthesis of polybenzimidazoles with sulfonic acid groups

2-Sulfoterephthalic acid (STA) and disulfoisophthalic acid (DSIA) were synthesized through the sulfonation and the oxidation of m- and p-xylene. The polycondensation reactions of STA and DSIA with aromatic tetraamines gave polybenzimidazoles which contained one or two sulfonic acid groups for each repeating unit. The polymer obtained was soluble in sulfuric acid, some organic solvents, and aqueous strong alkaline solution. The polymers were stable up to 400°C, but they gave polybenzimidazoles above 400°C by eliminating sulfonic acid groups, instead of ring closure.     

Thermal properties and solubility of ordered aromatic polyamides containing a methyl-substituted phenylene linkage

Ordered aromatic polyamides and copolyamides were prepared by the polycondensation of terephthaloyl and isophthaloyl dichlorides with symmetrical diamines containing preformed amide linkages derived from unsymmetrical methyl—substituted aromatic diamines at low temperature. Thermal properties and solubilities of the ordered polyamides were compared with those of the corresponding random polyamides. There was little difference between thermal stabilities of the ordered polyamide and the corresponding random one, while the former was less soluble in organic solvents than the latter, depending on the extent of hydrogen bonding of the amide groups. The thermal stability of the alternating copolyamides containing both terephthaloyl and isophthaloyl groups as acid components was less than that of the corresponding homopolymers having either a terephthaloyl or an isophthaloyl group, and the solubility of the former resembled that of the corresponding ordered homopolysiophthalamides in accord with the extent of hydrogen bonding of the amide groups in both polymers.     

Deoxygenation of sugar trifluoromethanesulfonates by sodium metal in liquid ammonia and by photolysis

Several trifluoromethanesulfonyl(TFMS) derivatives of sugars were prepared and treated with sodium in liquid ammonia or subjected to ultraviolet irradiation. Three 3-$\text{O}$-TFMS derivatives gave the corresponding 3-deoxy compounds, but a 2-$\text{O}$-TFMS derivative gave a branched-chain sugar.     

Skin friction reduction by large air bubbles in a horizontal channel flow

Microbubble and air film methods are believed to be applicable to skin friction reduction in ships. Small bubbles are dispersed into the turbulent boundary layer in the former case, and wide air layers cover the wall surface in the latter case. Previous studies did not specifically address the intermediate case between the microbubble and air film conditions. This study is concerned with the possibility and mechanism of drag reduction using relatively large air bubbles compared to the boundary layer thickness in a horizontal turbulent channel flow. The relationship between local skin friction and the bubble’s interfacial structure is investigated by synchronizing the measurement of wall-shear stress with the image acquisition of bubbles. The bubble sizes range from 2 to 90 mm approximately. As a result, a negative correlation between the local skin friction and the local void fraction is confirmed by the time-resolved measurement. A new observation is the fact that the local skin friction decreases drastically in the rear part of individual large bubbles, and rapidly increases after the bubble’s rear interface passes. This characteristic underlies the bubble-size dependency of the average skin friction in the intermediate bubble size condition.