A satellite of the grand Furuta inequality and its application

The grand Furuta inequality has the following satellite (SGF;$t\in [0\text{,}1]$), given as a mean theoretic expression:$A?B>0\text{,}t\in [0\text{,}1]?A^{-r+t}{\#}_{\frac{1-t+r}{(p-t)s+r}}(A^t{?}_s{B}^p)?B\text{for}r?t\text{;}p\text{,}s?1\text{,}$where ${\#}_{\alpha }$ is the $\alpha$-geometric mean and ${?}_s$ ($s?[0\text{,}1]$) is a formal extension of ${\#}_{\alpha }$. It is shown that (SGF; $t\in [0\text{,}1]$) has the Löwner–Heinz property, i.e. (SGF; $t=1$) implies (SGF;t) for every $t\in [0\text{,}1]$. Furthermore, we show that a recent further extension of (GFI) by Furuta himself has also the Löwner–Heinz property.     

Single-crystal-to-single-crystal photocyclization of 4-(2,4,6-triisopropylbenzoyl)benzoic acid in the salt crystal with (S)-phenylethylamine

Ultraviolet irradiation of a salt crystal of 4-(2,4,6-triisopropylbenzoyl)benzoic acid with (S)-phenylethylamine promoted single-crystal-to-single-crystal photocyclization to give an enantiopure (R,R)-cyclopentenol and almost racemic cyclobutenol. The reaction paths were elucidated by X-ray crystallographic analysis of the crystal before and after irradiation.     

Chiral distortion in a Mn(IV)(salen)(N3)2 derived from Jacobsen's catalyst as a possible conformation model for its enantioselective reactions

The Mn (IV)(salen)(N 3) 2 complex ( 3) from Jacobsen's catalyst is synthesized, and the X-ray crystal structures of 3 as well as the starting Mn (III)(salen)(N 3)(CH 3OH) complex ( 2) are determined in order to investigate the conformation of the high-valent Mn (IV)(salen) molecule in comparison with that of Mn (III)(salen). The asymmetric unit of the crystal of 3 contains four complexes, all of which adopt a nonplanar stepped conformation effectively distorted by the chirality of the diimine bridge. The asymmetric unit of 2 also contains four complexes. Two of them show a stepped conformation of a lesser degree, but the other two adopt a bowl-shaped conformation. Comparison of the structural parameters shows that the Mn center in 3 is coordinated from both sides by two external axial N 3 ligands with significantly shorter bond lengths, which could induce greater preference for the stepped conformation in 3. The CH 3CN solution of 3 shows circular dichroism with a significantly strong band at 275 nm as compared to 2, suggesting that 3 may adopt a more chirally distorted conformation also in solution. The circular dichroism spectrum of 3 is slightly altered with isodichroic points from 298 to 253 K and shows no further change at temperatures lower than 253 K, suggesting that the solution of 3 contains an equilibrium between two conformers, where a low-energy conformer with more chiral distortion is predominantly favored even at room temperature. Complexes 2 and 3 are thoroughly characterized using various techniques including cyclic voltammetry, magnetic susceptibility, UV-vis, electron paramagnetic resonance, (1)H NMR, infrared spectroscopy, and electrospray ionization mass spectrometry.     

Controlled-rate thermal analysis

Controlled-rate thermal analysis (CRTA) and differential scanning calorimetry (DSC) were used to investigate the adsorbed water layers and the surface properties of different commercial activated carbons. A simple method is proposed to obtain information on the properties of the adsorbed water film and the surface heterogeneity of the materials studied. This method utilizes TG mass loss and the first derivative of the DTG mass loss curves with respect to temperature and time, obtained during programmed liquid thermodesorption. The obtained TG mass loss curves, which reflect the energetic heterogeneity, consisted of steps and inflections which were associated with the mechanism of wetting of the solid surfaces. The heights of these steps and inflections depend on the adsorption capacity, the adsorption potential and the nature and number of the active centers of the carbon samples studied. The values of the total porosity and the surface phase capacity obtained by this method are in good agreement with those estimated on the basis of independent methods. The behaviour of water/carbon samples was studied by means of DSC at subambient and elevated temperatures. The experimental results provided novel data on the structural heterogeneity, the thermal stability of the water/carbon interface and its phase and structural transitions.Support from the Research Council of Kent State University (Ohio, USA) is acknowledged. The author is pleased to thank Drs M. Jaroniec, R. K. Gilpin, J. Choma and R. Dobrowolski for fruitful discussions and the active carbon samples.     

H-atom abstraction reaction for organic substrates via mononuclear copper(II)-superoxo species as a model for DbetaM and PHM

Hydrogen atom abstraction reactions have been implicated in oxygenation reactions catalyzed by copper monooxygenases such as peptidylglycine alpha-hydroxylating monooxygenase (PHM) and dopamine beta-monooxygenase (DbetaM). We have investigated mononuclear copper(I) and copper(II) complexes with bis[(6-neopentylamino-2-pyridyl)methyl][(2-pyridyl)methyl]amine (BNPA) as functional models for these enzymes. The reaction of [Cu(II)(bnpa)]2+ with H2O2, affords a quasi-stable mononuclear copper(II)-hydroperoxo complex, [Cu(II)(bnpa)(OOH)]+ (4) which is stabilized by hydrophobic interactions and hydrogen bonds in the vicinity of the copper(II) ion. On the other hand, the reaction of [Cu(I)(bnpa)]+ (1) with O2 generates a trans-mu-1,2-peroxo dicopper(II) complex [Cu(II)2(bnpa)2(O2(2-]2+ (2). Interestingly, the same reactions carried out in the presence of exogenous substrates such as TEMPO-H, produce a mononuclear copper(II)-hydroperoxo complex 4. Under these conditions, the H-atom abstraction reaction proceeds via the mononuclear copper(II)-superoxo intermediate [Cu(II)(bnpa)(O2-)]+ (3), as confirmed from indirect observations using a spin trap reagent. Reactions with several substrates having different bond dissociation energies (BDE) indicate that, under our experimental conditions the H-atom abstraction reaction proceeds for substrates with a weak X-H bond (BDE < 72.6 kcal mol(-1)). These investigations indicate that the copper(II)-hydroperoxo complex is a useful tool for elucidation of H-atom abstraction reaction mechanisms for exogenous substrates. The useful functionality of the complex has been achieved via careful control of experimental conditions and the choice of appropriate ligands for the complex.     

Effects of graft densities and chain lengths on separation of bioactive compounds by nanolayered thermoresponsive polymer brush surfaces

We have prepared various poly(N-isopropylacrylamide) (PIPAAm)-grafted silica bead surfaces through surface-initiated atom transfer radical polymerization (ATRP) by changing graft densities and brush chain lengths. The prepared surfaces were characterized by chromatographic analysis using the modified silica beads as chromatographic stationary phases. ATRP initiator (2-(m,p-chloromethylphenyl)ethyltrichlorosilane) density on silica bead surfaces was modulated by changing the feed composition of the self-assembled monolayers (SAMs) of mixed silane coupling agents consisting of ATRP initiator and phenethyltrichlorosilane on the surfaces. IPAAm was then polymerized on SAM-modified silica bead surfaces by ATRP in 2-propanol at 25 degrees C. The chain length of the grafted PIPAAm was controlled by simply changing the ATRP reaction time at constant catalyst concentration. The thermoresponsive surface properties of the PIPAAm-grafted silica beads were investigated by temperature-dependent elution behavior of hydrophobic steroids from the surfaces using Milli-Q water as a mobile phase. On the surfaces grafted with shorter PIPAAm chains, longer retention times for steroids were observed on sparsely grafted PIPAAm surfaces compared to dense PIPAAm brushes at low temperature, because of hydrophobic interactions between the exposed phenethyl groups of SAMs on silica surfaces and steroid molecules. Retention times for steroids on dilute PIPAAm chain columns decreased with temperature similarly to conventional reverse-phase chromatographic modes on octadecyl columns. This effect was due to limited interaction of solutes with the PIPAAm-grafted surfaces. Retention times for steroids on dilute PIPAAm brush surfaces with longer PIPAAm chains became greater above the PIPAAm transition temperature. At low-temperature regions, hydrated and expanded PIPAAm at low temperatures prevented hydrophobic interactions between the phenethyl group of SAMs on the silica bead surfaces and steroid molecules. Retention times for steroids on a dense PIPAAm brush column increased with temperature since solvated polymer segments within the dense brush layer undergo dehydration over a broad range of temperatures. In conclusion, PIPAAm graft density has a crucial influence on the elution behavior of steroids because of the interaction of analytes with silica bead interfaces, and because of the characteristic dehydration of PIPAAm in dense-pack brush surfaces.     

Novel self-assembled monolayers of disulfides with bicyclo[2.2.2]octane moieties of Au(111)

A series of disulfides containing bicyclo[2.2.2]octane moieties have been synthesised and their self-assembled monolayers (SAMs) on Au(111) have been characterized using scanning tunnelling microscopy (STM).     

The incorporation of carboxylate groups into temperature‐responsive poly(N‐isopropylacrylamide)‐based hydrogels promotes rapid gel shrinking

Aqueous gel deswelling rates for copolymer hydrogels comprising N‐isopropylacrylamide (IPAAm) and 2‐carboxyisopropylacrylamide (CIPAAm) in response to increasing temperatures were investigated. Compared with pure IPAAm‐based gels, IPAAm–CIPAAm gels shrink very rapidly in response to small temperature increases across their lower critical solution temperature (their volume is reduced by five‐sixths within 60 s). Shrinking rates for these hydrogels increase with increasing CIPAAm content. In contrast, structurally analogous IPAAm–acrylic acid (AAc) copolymer gels lose their temperature sensitivity with the introduction of only a few mole percent of AAc. Additionally, deswelling rates of IPAAm–AAc gels decrease with increasing AAc content. These results indicate that IPAAm–CIPAAm copolymer gels behave distinctly from IPAAm–AAc systems even if both comonomers, CIPAAm and AAc, possess carboxylic acid groups. Thus, we propose that the sensitive deswelling behavior for IPAAm–CIPAAm gels results from strong hydrophobic chain aggregation maintained between network polymer chains due to the similar chemical structures of CIPAAm and IPAAm. This structural homology facilitates aggregation of chain isopropylamide groups for both IPAAm and CIPAAm sequences with increasing temperature. The incorporation of AAc, however, shows no structural homology to IPAAm, inhibiting chain aggregation and limiting collapse. A functionalized temperature‐sensitive poly(N‐isopropylacrylamide) hydrogel containing carboxylic acid groups is possible with CIPAAm, producing rapid and large volume changes in response to smaller temperature changes. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 335–342, 2001     

Interfacial property modulation of thermoresponsive polymer brush surfaces and their interaction with biomolecules

Dense poly(N-isopropylacrylamide) (PIPAAm) brushes were created on silica bead surfaces by surface-initiated atom transfer radical polymerization (ATRP). Interfacial properties of PIPAAm brushes were characterized by thermoresponisve interaction with biomolecules. The grafted amounts of PIPAAm on silica bead surfaces exceeded that from previously reported polymer-hydrogel-modified silica beads prepared by conventional radical polymerization by nearly 1 order of magnitude. Temperature-dependent chromatographic interactions with soluble analytes were modulated by changing the grafted PIPAAm chain lengths. Short PIPAAm-grafted silica beads produce insufficient dehydration and chain aggregation to separate steroids using weak hydrophobic interactions. In contrast, broad unresolved peaks were observed on silica beads column grafted with long PIPAAm chains due to steroid partitioning into thick, densely grafted PIPAAm brush layers. Thus, silica beads column grafted with PIPAAm chains of proper length can demonstrate baseline separation of steroids with relatively high resolution among the tested columns. Relatively longer retention times for steroid analytes were observed on all columns compared to those previously reported for other PIPAAm-grafted silica beads. This indicates that densely PIPAAm-grafted chains enable control of strong hydrophobic interactions with steroids by changing the column temperature. Densely grafted PIPAAm columns were also successful in separating two peptides into two peaks as the column temperature was increased to 40 degrees C. This provides an effective separation alternative for peptides using substantial hydrophobicity without modification of hydrophobic surfaces and/or low mobile phase pH. In conclusion, densely PIPAAm-grafted surfaces exhibit strong, reversible temperature-modulated hydrophobic interactions, facilitating baseline separations of steroids and peptides in aqueous milieu without changes in the mobile phase pH and high ionic strength.