Kinetics and mechanism of the reduction of 1,10-phenanthroline—copper(II) complex

The cyclic voltammetric study of 1,10-phenanthroline—copper(II) complex was carried out in acidic buffer solution. It was found from the current—mole ratio (copper (II): 1,10-phenanthroline) relationship that the maximum coordination number of 1,10-phenanthroline—copper(II) complex was four under the present experimental condition. The reduction mechanism and kinetics of copper(II) was studied in the presence of various concentrations of 1,10-phenanthroline.     

Binding of sulfonamides to erythrocyte proteins and possible drug-drug interaction

The mode of binding of sulfonamides to erythrocyte proteins and possible drug-drug interaction between those compounds in erythrocytes resulting in changes in tissue levels were studied in rats using zonisamide (a novel antiepileptic agent possessing a sulfonamide group), several other sulfonamides and some antiepileptics without a sulfonamide group. In Michaelis-Menten plottings, the sulfonamide was found to be concentrated into erythrocytes in vitro and in vivo in a saturable high-affinity mode and in a linear low-affinity mode at ordinary therapeutic plasma levels through a simple diffusion process. Concentration in erythrocytes was affected by the presence of albumin in the extracellular medium. The cellular sulfonamide was readily replaced by extracellular sulfonamides in vitro. Even in vivo, erythrocyte levels of zonisamide were lowered by administration of other sulfonamides, although the plasma and tissue levels were not significantly changed since the plasma and tissue compartments of zonisamide were large relative to the erythrocyte compartment at ordinary therapeutic dose levels of zonisamide in animals and man. Therefore, disposition of zonisamide was not significantly influenced by other sulfonamides, but it is suggested that drug-drug interaction affecting the tissue levels may occur for a combination of sulfonamides with extremely different affinities for erythrocytes and low therapeutic plasma levels.     

Production of poly(methyl methacrylate) particles by dispersion polymerization with mercaptopropyl terminated poly(dimethylsiloxane) stabilizer in supercritical carbon dioxide

Poly(methyl methacrylate) (PMMA) particles were produced by dispersion polymerization of methyl methacrylate in the presence of mercaptopropyl terminated poly(dimethylsiloxane) (MP-PDMS) in supercritical carbon dioxide at about 30 MPa for 24 h at 65 °C. The particle diameter could be controlled in a size range of submicron to micron by varying MP-PDMS concentration. The MP-PDMS worked as not only a chain transfer agent but also a colloidal stabilizer, which was named tran stab.Part CCLI of the series Studies on suspension and emulsion     

Stereospecific living radical polymerization for simultaneous control of molecular weight and tacticity

The simultaneous control of the molecular weights and the tacticity was attained even during radical polymerization by the judicious combinations of the living/controlled radical polymerizations based on the fast interconversion between the dormant and active species, and the stereospecific radical polymerizations mediated by the added Lewis acids or polar solvents via the coordination to the monomer/polymer terminal substituents. This can be useful for various monomers including not only conjugated monomers, such as acrylamides and methacrylates, but also nonconjugated ones such as vinyl acetate and N‐vinylpyrrolidone. Stereoblock polymers were easily obtained by the addition of the Lewis acids or by change of the solvents during the living radical polymerizations. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6147–6158, 2006     

Controlled-rate thermal analysis

Controlled-rate thermal analysis (CRTA) and differential scanning calorimetry (DSC) were used to investigate the adsorbed water layers and the surface properties of different commercial activated carbons. A simple method is proposed to obtain information on the properties of the adsorbed water film and the surface heterogeneity of the materials studied. This method utilizes TG mass loss and the first derivative of the DTG mass loss curves with respect to temperature and time, obtained during programmed liquid thermodesorption. The obtained TG mass loss curves, which reflect the energetic heterogeneity, consisted of steps and inflections which were associated with the mechanism of wetting of the solid surfaces. The heights of these steps and inflections depend on the adsorption capacity, the adsorption potential and the nature and number of the active centers of the carbon samples studied. The values of the total porosity and the surface phase capacity obtained by this method are in good agreement with those estimated on the basis of independent methods. The behaviour of water/carbon samples was studied by means of DSC at subambient and elevated temperatures. The experimental results provided novel data on the structural heterogeneity, the thermal stability of the water/carbon interface and its phase and structural transitions.Support from the Research Council of Kent State University (Ohio, USA) is acknowledged. The author is pleased to thank Drs M. Jaroniec, R. K. Gilpin, J. Choma and R. Dobrowolski for fruitful discussions and the active carbon samples.     

Preparation of dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed

An attempt was made to produce carrier particles for dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed. The lactose carrier particles were coated with lactose aqueous solution containing hydroxypropyl methyl cellulose (HPMC) as a binder using a Wurster coating apparatus. Drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers under various particle surface conditions. These powder mixtures were aerosolized by a Jethaler((R)), and the in vitro deposition properties of salbutamol sulfate were evaluated by a twin impinger. The in vitro inhalation properties of the powder mixture prepared using the coated lactose carrier differed significantly compared with those of the powder mixture prepared using the uncoated lactose carrier, indicating improvements in in vitro inhalation properties of sulbutamol sulfate. In vitro inhalation properties increased with the surface coating time. This surface coating system would thus be valuable for increasing the in vitro inhalation properties of dry powder inhalation with lactose carrier particles.     

Uptake of alkali and alkaline earth metal ions into electrochemically pretreated glassy carbon fibres by flow-through electrolysis

When glassy carbon fibres are used, alkali and alkaline earth metal ions are adsorbed in the micropores which are created or activated by oxidative treatment of the fibres. The average pore radius was estimated to be 2 nm by nitrogen adsorption experiments. Uptake was studied with a flow system consisting of a flow-through carbon-fibre electrode; a dropping mercury electrode at the end of the flow line monitored changes in the metal ion concentrations. The ions were taken up at negative potentials and released at positive potentials. The amount taken up increased in the sequence Na⁺ < Li⁺ < H⁺, suggesting that the ions were desolvated before entering the pore system.     

Analysis of the release process of phenylpropanolamine hydrochloride from ethylcellulose matrix granules

The release properties of phenylpropanolamine hydrochloride (PPA) from ethylcellulose (EC, ethylcellulose 10 cps (EC#10) and/or 100 cps (EC#100)) matrix granules prepared by the extrusion granulation method were examined. The release process could be divided into two parts, and was well analyzed by applying square-root time law and cube root law equations, respectively. The validity of the treatments was confirmed by the fitness of the simulation curve with the measured curve. At the initial stage, PPA was released from the gel layer of swollen EC in the matrix granules. At the second stage, the drug existing below the gel layer dissolved, and was released through the gel layer. Also, the time and release ratio at the connection point of the simulation curves was examined to determine the validity of the analysis. Comparing the release properties of PPA from the two types of EC matrix granules, EC#100 showed more effective sustained release than EC#10. On the other hand, changes in the release property of the EC#10 matrix granule were relatively more clear than that of the EC#100 matrix granule. Thus, it was supposed that EC#10 is more available for controlled and sustained release formulations than EC#100.     

Synthesis of polystyrene/poly[2-(dimethylamino)ethyl methacrylate-stat-ethylene glycol dimethacrylate] core-shell latex particles by seeded emulsion polymerization and their application as stimulus-responsive particulate emulsifiers for oil-in-water emulsions

Surfactant-stabilized polystyrene (PS) latex particles with a mean hydrodynamic diameter of 155 nm were prepared by aqueous emulsion polymerization using 2,2'-azobis(2-amidinopropane) hydrochloride as a cationic radical initiator. Seeded aqueous emulsion copolymerizations of 2-(dimethylamino)ethyl methacrylate (DMA) and ethylene glycol dimethacrylate (EGDMA) were conducted in the presence of these PS particles to produce two batches of colloidally stable core-shell latex particles, in which the shell comprised a cross-linked P(DMA-stat-EGDMA) overlayer. Both the PS and PS/P(DMA-stat-EGDMA) latexes were characterized in terms of their particle size, morphology, and composition using dynamic light scattering, electron microscopy, and FT-IR spectroscopy, respectively. Using the PS/P(DMA-stat-EGDMA) latex particles as a pH-responsive particulate ('Pickering'-type) emulsifier, polydisperse n-dodecane-in-water emulsions were prepared at pH 8 that could be partially broken (demulsified) on lowering the solution pH to 3. These emulsions were characterized in terms of their emulsion type, mean droplet diameter, and morphology using electrical conductivity and Mastersizer measurements, optical microscopy, and scanning electron microscopy (using critical point drying for sample preparation).     

Site-selective RNA cleavage by DNA bearing a base pair-mimic nucleoside

We have synthesized the deoxyadenosine derivative tethering a phenyl group (X), which mimics the Watson-Crick A/T base pair. The RNA/DNA hybrid duplexes containing X in the middle of the DNA sequence showed a similar thermal stability regardless of the ribonucleotide species (A, G, C, or U) opposite to X, probably because of the phenyl group stacking inside of the duplex accompanied by the opposite ribonucleotide base flipped in an extrahelical position. The RNA strand hybridized with the DNA strand bearing X was cleaved on the 3'-side of the ribonucleotide opposite to X in the presence of MgCl2, and the RNA sequence to be cleaved was not restricted. The site-specific RNA hydrolysis suggests that the DNA strand bearing X has the advantage of the site-selective base flipping in the target sequence and the development of a "universal deoxyribozyme" to exclusively cleave a target RNA sequence.