Controlled-rate thermal analysis

Controlled-rate thermal analysis (CRTA) and differential scanning calorimetry (DSC) were used to investigate the adsorbed water layers and the surface properties of different commercial activated carbons. A simple method is proposed to obtain information on the properties of the adsorbed water film and the surface heterogeneity of the materials studied. This method utilizes TG mass loss and the first derivative of the DTG mass loss curves with respect to temperature and time, obtained during programmed liquid thermodesorption. The obtained TG mass loss curves, which reflect the energetic heterogeneity, consisted of steps and inflections which were associated with the mechanism of wetting of the solid surfaces. The heights of these steps and inflections depend on the adsorption capacity, the adsorption potential and the nature and number of the active centers of the carbon samples studied. The values of the total porosity and the surface phase capacity obtained by this method are in good agreement with those estimated on the basis of independent methods. The behaviour of water/carbon samples was studied by means of DSC at subambient and elevated temperatures. The experimental results provided novel data on the structural heterogeneity, the thermal stability of the water/carbon interface and its phase and structural transitions.Support from the Research Council of Kent State University (Ohio, USA) is acknowledged. The author is pleased to thank Drs M. Jaroniec, R. K. Gilpin, J. Choma and R. Dobrowolski for fruitful discussions and the active carbon samples.     

Stereospecific living radical polymerization for simultaneous control of molecular weight and tacticity

The simultaneous control of the molecular weights and the tacticity was attained even during radical polymerization by the judicious combinations of the living/controlled radical polymerizations based on the fast interconversion between the dormant and active species, and the stereospecific radical polymerizations mediated by the added Lewis acids or polar solvents via the coordination to the monomer/polymer terminal substituents. This can be useful for various monomers including not only conjugated monomers, such as acrylamides and methacrylates, but also nonconjugated ones such as vinyl acetate and N‐vinylpyrrolidone. Stereoblock polymers were easily obtained by the addition of the Lewis acids or by change of the solvents during the living radical polymerizations. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6147–6158, 2006     

H-atom abstraction reaction for organic substrates via mononuclear copper(II)-superoxo species as a model for DbetaM and PHM

Hydrogen atom abstraction reactions have been implicated in oxygenation reactions catalyzed by copper monooxygenases such as peptidylglycine alpha-hydroxylating monooxygenase (PHM) and dopamine beta-monooxygenase (DbetaM). We have investigated mononuclear copper(I) and copper(II) complexes with bis[(6-neopentylamino-2-pyridyl)methyl][(2-pyridyl)methyl]amine (BNPA) as functional models for these enzymes. The reaction of [Cu(II)(bnpa)]2+ with H2O2, affords a quasi-stable mononuclear copper(II)-hydroperoxo complex, [Cu(II)(bnpa)(OOH)]+ (4) which is stabilized by hydrophobic interactions and hydrogen bonds in the vicinity of the copper(II) ion. On the other hand, the reaction of [Cu(I)(bnpa)]+ (1) with O2 generates a trans-mu-1,2-peroxo dicopper(II) complex [Cu(II)2(bnpa)2(O2(2-]2+ (2). Interestingly, the same reactions carried out in the presence of exogenous substrates such as TEMPO-H, produce a mononuclear copper(II)-hydroperoxo complex 4. Under these conditions, the H-atom abstraction reaction proceeds via the mononuclear copper(II)-superoxo intermediate [Cu(II)(bnpa)(O2-)]+ (3), as confirmed from indirect observations using a spin trap reagent. Reactions with several substrates having different bond dissociation energies (BDE) indicate that, under our experimental conditions the H-atom abstraction reaction proceeds for substrates with a weak X-H bond (BDE < 72.6 kcal mol(-1)). These investigations indicate that the copper(II)-hydroperoxo complex is a useful tool for elucidation of H-atom abstraction reaction mechanisms for exogenous substrates. The useful functionality of the complex has been achieved via careful control of experimental conditions and the choice of appropriate ligands for the complex.     

Novel self-assembled monolayers of disulfides with bicyclo[2.2.2]octane moieties of Au(111)

A series of disulfides containing bicyclo[2.2.2]octane moieties have been synthesised and their self-assembled monolayers (SAMs) on Au(111) have been characterized using scanning tunnelling microscopy (STM).     

Surfactant-mixing effects on the interfacial tension and the microemulsion formation in water/supercritical CO2 system

The effects of surfactant mixing on interfacial tension and on microemulsion formation were examined for systems of air/water and water/supercritical CO2 (scCO2) interfaces and for water/scCO2 microemulsions. A fluorinated surfactant, sodium bis(1H,1H,2H,2H-heptadecafluorodecyl)-2-sulfosuccinate (8FS(EO)2), was mixed with the three hydrocarbon surfactants, Pluronic L31, Tergitol TMN-6, and decyltrimethylammonium chloride (DeTAC), at equimolar ratio. For all the cases, the interfacial tension was significantly lowered by the mixing. The positive synergistic effect suggests that the mixed surfactants tend to pack more closely on the interface than the pure constituents. It was found, however, that the microemulsion formation in scCO2 was never facilitated by the mixing, except for the case of TMN-6. This is probably due to the segregation of the surfactants into hydrocarbon-rich and fluorocarbon-rich phases on the microemulsion surface.     

Highly beta-selective O-glucosidation due to the restricted twist-boat conformation

[reaction: see text] Ethyl 1-thio-2,3,4,6-tetrakis-O-triisopropylsilyl-beta-d-glucopyranoside, ethyl 6-O-benzyl-1-thio-2,3,4-tris-O-triisopropylsilyl-beta-d-glucopyranoside, and ethyl 6-O-pivaloyl-1-thio-2,3,4-tris-O-triisopropylsilyl-beta-d-glucopyranoside induced highly beta-selective O-glucosidations. Among them, the 6-O-pivaloylated substrate provided the best selectivity up to alpha/beta = 3:97 with cyclohexylmethanol, and the substrate was used for glucosidations with secondary and tertiary alcohols in a highly beta-selective manner. The selectivity would be caused by the twist-boat conformation of the pyranose; this is the first beta-selective O-glucosidation based on conformational control of the pyranose ring.     

Reactivity and electrochemical behavior of ruthenium dithiolene complexes with coordinatively unsaturated metal centers: cycloaddition and dimerization reactions

The novel ruthenium dithiolene complexes [(arene)Ru{S₂C₂(COOMe)₂}] (arene = C₆H₆ (1a), C₆H₄(Me)(iPr) (1b), C₆Me₆ (1c)) were synthesized. The equilibrium between complex 1a and the corresponding dimer [(C₆H₆)Ru{S₂C₂(COOMe)₂}]₂ (1a′) was confirmed in solution. The reaction of complex 1a with dimethyl- or diethylacetylene dicaboxylate gave the alkene-bridged adducts [(C₆H₆)Ru{S₂C₂(COOMe)₂}{C₂(COOR)₂}] (R = Me (2a), Et (3a)) as [2 + 2] cycloaddition products formally. The reactions of complex 1a with diazo compounds also gave the alkylidene-bridged adducts [(C₆H₆)Ru{S₂C₂(COOMe)₂}(CHR)] (R = H (4a), SiMe₃ (5a), COOEt (6a)) as [2 + 1] cycloaddition products. The electrochemical behavior of complex 1a was investigated. The reductant of complex 1a was a stable species for several minutes. The oxidant of complex 1a was very unstable; the cation 1a⁺ formed was immediately converted to the corresponding cationic dimer 1a′⁺. The cationic dimer 1a′⁺ was stable for several minutes, and it was rapidly and quantitatively converted to the neutral complex 1a when it was reduced.     

An iterative type I polyketide synthase PKSN catalyzes synthesis of the decaketide alternapyrone with regio-specific octa-methylation

A biosynthetic gene cluster containing five genes, alt1-5, was cloned from Alternaria solani, a causal fungus of early blight disease to tomato and potato. Homology searching indicated that the alt1, 2, and 3 genes code for cytochrome P450s and the alt4 gene for a FAD-dependent oxygenase/oxidase. The alt5 gene encodes a polyketide synthase (PKS), named PKSN, that was found to be an iterative type I complex reduced-type PKS with a C-methyltransferase domain. To identify the PKSN function, the alt5 gene was introduced into the fungal host Aspergillus oryzae under an alpha-amylase promoter. The transformant produced a polyketide compound, named alternapyrone, whose structure is shown to be 3,5-dimethyl-4-hydroxy-6-(1,3,5,7,11,13-hexamethyl-3,5,11-pentadecatrienyl)-pyran-2-one. Labeling experiments confirmed that alternapyrone is a decaketide with octa-methylation from methionine on every C(2) unit except the third unit.     

Simultaneous determination of the binding of amantadine and its analogues to synthetic melanin by liquid chromatography after precolumn derivatization with dansyl chloride

For the determination of amantadine (1-ADA), 2-adamantanamine (2-ADA), memantine (MEM), and rimantadine (RIM) in melanin binding studies, the simultaneous determination of 1-ADA or 2-ADA, MEM, and RIM is investigated by high-performance liquid chromatographic assay with dansyl chloride as a fluorescent derivative reagent. Dansyl derivatives with fluorescent intensity are detected at an excitation wavelength of 370 nm and an emission wavelength of 506 nm. Retention times of 1-ADA, 2-ADA, MEM, and RIM derivatives are 12.2, 12.2, 15.2, and 16.6 min, respectively. The peak of 1-ADA derivative coelutes with the 2-ADA derivative. The limits of detection for 1-ADA, 2-ADA, MEM, and RIM are 0.014, 0.007, 0.012, and 0.020microM, respectively (signal-to-noise ratio of 3:1). In the intra- and interday assay, the range of standard deviation to the average of 1-ADA, 2-ADA, MEM, and RIM is 4.6-12.7%. Their recovery is also good. The ranking order for synthetic melanin binding among these compounds is RIM > MEM > 2-ADA = 1-ADA. The method is simple, sensitive, and reproducible for simultaneously measuring 1-ADA or 2-ADA, MEM, and RIM. Also, it is useful to investigate their binding kinetics to melanin.     

Conformation of solvent N,N-dimethylpropionamide in the coordination sphere of the zinc(II) ion studied by Raman spectroscopy and DFT calculations

Solvation structure of the zinc(II) ion in N,N-dimethylpropionamide (DMPA) was studied by Raman spectroscopy at varying temperature and by quantum mechanical calculations. No significant ion-pair formation was found for the Zn(ClO4)2 solution in the molality range m(Zn) < 1.5 mol kg(-1), and the solvation number of the zinc(II) ion was determined to be 4, indicating that 6-coordination of DMPA is sterically hindered. Interestingly, DMPA molecules are under equilibrium between planar cis and nonplanar staggered conformers, and the latter is more preferred in the coordination sphere, while the reverse is the case in the bulk. The DeltaG degrees , DeltaH degrees , and TDeltaS degrees values of conformational change from planar cis to nonplanar staggered in the coordination sphere were obtained to be -0.9, -8.5, and -7.5 kJ mol(-1), respectively. Density functional theory (DFT) calculations show that the planar cis conformer is more favorable than the nonplanar staggered one in the 1:2 cluster, as is the case for a single DMPA molecule and H(DMPA)+, indicating that there hardly occurs solvent-solvent interaction through the metal ion in the Zn2+-DMPA 1:2 cluster. On the other hand, the SCF energy of [Zn(planar cis-DMPA)4-n(nonplanar staggered DMPA)n]2+ (n = 0-4) decreases with increasing n, implying that the nonplanar staggered conformer is preferred in the solvate ion. It is thus concluded that solvent-solvent interaction through space, or solvation steric effect, plays a crucial role in the conformational equilibrium in the coordination sphere of the four-solvate metal ion.