Mg粉粒度对MgB2超导体宏观特征和显微结构的影响

研究了Mg粉粒度对MgB2超导体宏观特征和显微结构的影响规律。将不同粒度的Mg粉和B粉分别按1.03∶2的比例混合、压制成型后,在流通高纯氩气的条件下于800℃烧结1h,制备出MgB2块材。利用阿基米德方法、X射线衍射仪和扫描电子显微镜等分别测试样品的密度、物相组成和显微结构等。结果表明,Mg粉粒度对MgB2超导体的物相组成没有影响;随着Mg粉粒度的增加,MgB2超导体的最大气孔尺寸、质量损失率、体积膨胀系数都逐渐增大,但其密度逐渐降低。     

利用量子对应态原理预测氦-3 p-v-T性质

利用量子对应态原理与Ne,4He的实验数据预测了3He的p-v-T性质。结果表明,在12-20K温区内,压力的计算值与Gibbons实验数据的平均相对误差是2.008%,最大误差是9.131%;在20-60K温区内,压力的计算值与Gibbons实验数据的平均相对误差是1.692%,最大误差是2.276%。获得了比较满意的预测结果。     

Ku波段微波小功率放大器的设计

文中论述了利用修正的S参数法,设计了Ku波段微波小功率放大器,具有功率增益高和可靠性高的优点。利用这种设计方法,设计并制作了两个实验的功率放大器,并且它们的性能与设计数据很接近     

Study on Dual Bragg Wavelength Fiber Grating and Its Tuning Scheme

Because of package, a single FBG has dual Bragg wavelength. One is sensitive to stress and the other is sensitive to temperature. By using the special mechanism, the wavelengths can be tuned by stress and temperature respectively.     

The Characteristic of Threading Dislocation in Different Structures GaN Films Grown by MOCVD

Three mechanisms to reduce threading dislocations(TDs) in GaN films as the epitaxial films grow thicker are suggested by SEM and TEM     

Study of the electric capacitance spectra on symmetric quantum-dot pattern

We have calculated the ground-state energy of the symmetric quantum-dot pattern by the ab initio calculation method, i.e. unrestricted Hartree-Fock-Roothaan (UHFR) method based on the Gaussian basis, and studied their electric capacitance spectra, assuming each quantum dot of quantum-dot pattern to be confined in a three-dimensional spherical potential well of finite depth. For the systems in question, our results show that our method and theoretical model not only give the electric capacitance peaks similar to s-shell and p-shell atom-like quantum dot, but also show some new fine-structure of electric capacitance in the symmetric quantum-dot pattern system. This method might be a feasible tool to study few-electron problems on the symmetric quantum-dot pattern system.     

Calibrating camera radial distortion with cross-ratio invariability

The calibration of camera distortion plays an important role in the field of industrial machine vision application. In this paper, a novel approach for calibrating camera radial distortion is presented based on cross-ratio invariability for perspective projection. Assumed to be with one-order radial distortion, the image coordinates and the cross-ratio of only four collinear points in space are needed in this approach. The cross-ratio, easily known from a calibration target, is identical with that of the four corresponding image points. This is called the cross-ratio invariability for perspective projection. A monadic two-order equation is built based on the cross-ratio invariability, which gives an accurate solution to radial distortion coefficients. A digital simulation and a practical image correction prove this approach to be simple, accurate, efficient and time saving.     

Optimized prefactored compact schemes

The numerical simulation of aeroacoustic phenomena requires high-order accurate numerical schemes with low dispersion and dissipation errors. In this paper we describe a strategy for developing high-order accurate prefactored compact schemes, requiring very small stencil support. These schemes require fewer boundary stencils and offer simpler boundary condition implementation than existing compact schemes. The prefactorization strategy splits the central implicit schemes into forward and backward biased operators. Using Fourier analysis, we show it is possible to select the coefficients of the biased operators such that their dispersion characteristics match those of the original central compact scheme and their numerical wavenumbers have equal and opposite imaginary components. This ensures that when the forward and backward stencils are added, the original central compact scheme is recovered. To extend the resolution characteristic of the schemes, an optimization strategy is employed in which formal order of accuracy is sacrificed in preference to enhanced resolution characteristics across the range of wavenumbers realizable on a given mesh. The resulting optimized schemes yield improved dispersion characteristics compared to the standard sixth- and eighth-order compact schemes making them more suitable for high-resolution numerical simulations in gas dynamics and computational aeroacoustics. The efficiency, accuracy and convergence characteristics of the new optimized prefactored compact schemes are demonstrated by their application to several test problems.     

包层泵浦的L波段Er3+/Yb3+共掺光纤激光器

报道了一种工作波长在L波段的包层泵浦Er³⁺/Yb³⁺共掺光纤环形激光器. 环形腔内的激光工作介质为一段9 m长的Er³⁺/Yb³⁺共掺高掺杂光纤. 利用6个976 nm LD同时抽运前段Er³⁺/Yb³⁺共掺双包层光纤产生的放大自发辐射谱作二次抽运源, 使腔内增义谱由C波段移到L波段, 实现了L波段光纤激光器的稳定输出; 采用包层泵浦技术, 在抽运功率为3594.5 mW时, 测得泵浦入纤功率为2731.8 mW, 实现了输出连续功率最大518.4 mW,斜率效率达到19% 的激光输出; 所形成激光的工作波长为1613.94 nm, 激光光谱的3 dB带宽为1.5 nm, 边模抑制比接近于50 dB.     

一种基于强边缘块的时域多分辨率图像分割算法

针对序列图像的变化检测,提出了一种基于强边缘块的时域多分辨率图像分割算法.首先在具有明显边缘特征的图像序列中,提取图像强边缘块的直方图,然后,利用时域多分辨算法,比较不同帧之间的图像差异.这种方法不但能够检测出图像的变化,而且能够确定图像变化的类型.在阈值的选取过程中,采用了自适应阈值方法,实验证明这种方法取得了较好的效果.