脉冲激光光声量热装置的研制及用之对香豆素激光染料无辐射跃迁过程的研究

本文报道了一套适用于液相体系的高灵敏度脉冲激光光声量热装置的建立。用此仪器对香豆素激光染料C428, C47和C120的无辐射过程进行了研究, 测得它们在无水乙醇中的无辐射跃迁量子产额分别为0.50, 0.47和0.38。     

Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.     

A concise synthesis of nornitidine via nickel- or palladium-catalyzed annulation

A concise method to synthesize benzo[c]phenanthridine alkaloid, nornitidine, was developed utilizing nickel- or palladium-catalyzed iminoannulation of an internal alkyne. The advantages of this strategy included readily available starting materials, inexpensive reagents, short reaction steps, and good yields.     

SrZnO_2∶Eu~(3+),Li~+长波紫外激发红光荧光体的合成及发光性能研究

采用高温固相法合成了一种长波紫外激发的SrZnO2∶Eu3+,Li+发光材料,用X射线衍射谱、荧光光谱对样品进行了表征。结果表明,Eu3+离子在SrZnO2基质中主要占据Sr2+离子不对称性格位,发射来源于5D0→7F2612 nm为主的红光。加入电荷补偿剂Li+离子能显著提高发光强度,350~400 nm内的激发峰也有明显提高,同时观察到来自Eu3+离子高能级5D1→7FJ(J=0~2)的跃迁发射,并对其产生机制进行了初步探讨。实验结果表明,SrZnO2∶Eu3+,Li+是一种有发展前途的长波紫外激发红光荧光体。     

反胶束笼对纳米氯化银反应性能的微环境限定

研究了反映束中直径为１０￣１７ｎｍ的ＡｇＣｌ微料与亚甲基蓝之间的作用，比较了阴离子型和非离子型表面活性剂组成的反胶束微环境的影响，讨论了亚甲基蓝在粒子上的吸附，二聚体形成的钠米ＡｇＣｌ粒子对亚甲基蓝荧光猝灭机制。     

LiCl急冷过程中结构变化研究的一种几何学方法

计算了900 K、698 K、498 K和298 K温度下共4800个Voronoi多面体并对它们进行了统计分析. 计算表明: 在玻璃态转变温度区间, Voronoi多面体的统计分布有明显的变化。在以阳离子为中心的Voronoi多面体中, 在298 K时,四面体、五面体和六面体占总数的80%以上。