采用直、弯静叶压气机时序效应实验研究

本文实验研究了采用直、弯静叶的某重复级低速压气机在不同时序位置时的总性能及横截面流场特性.在不同流量工况下对压气机整体性能及流场进行了详细测量.结果表明,采用正弯静叶的压气机时序效应相对较弱且喘振裕度有所增加;同时,在压比略有减小的前提下(0.1%级别),凭借消耗扭轴功的大幅F降(3%左右),效率在设计工况下最大可提高...     

Thermal resistance matrix representation of thermal effects and thermal design in multi-finger power heterojunction bipolar transistors

The thermal resistance matrix including self-heating thermal resistance and thermal coupling resistance is presented to describe the thermal effects of multi-finger power heterojunction bipolar transistors. The dependence of thermal resistance matrix on finger spacing is also investigated. It is shown that both self-heating thermal resistance and thermal coupling resistance are lowered by increasing the finger spacing, in which the downward dissipated heat path is widened and the heat flow from adjacent fingers is effectively suppressed. The decrease of self-heating thermal resistance and thermal coupling resistance is helpful for improving the thermal stability of power devices. Furthermore, with the aid of the thermal resistance matrix, a 10-finger power heterojunction bipolar transistor (HBT) with non-uniform finger spacing is designed for high thermal stability. The optimized structure can effectively lower the peak temperature while maintaining a uniformity of the temperature profile at various biases and thus the device effectively may operate at a higher power level.     

Photoemission of graded-doping GaN photocathode

We study the photoemission process of graded-doping GaN photocathode and find that the built-in electric fields can increase the escape probability and the effective diffusion length of photo-generated electrons,which results in the enhancement of quantum efficiency.The intervalley scattering mechanism and the lattice scattering mechanism in high electric fields are also investigated.To prevent negative differential mobility from appearing,the surface doping concentration needs to be optimized,and it is calculated to be 3.19×10 17 cm 3.The graded-doping GaN photocathode with higher performance can be realized by further optimizing the doping profile.     

单目摄像机-激光测距传感器位姿测量系统

在单目视觉测量中,由于模型自身的限制,沿摄像机光轴方向上的位移测量精度一般远低于垂直光轴方向上的位移测量精度.首先,从数学模型上分析了单目视觉位姿测量在沿光轴方向上位移测量精度低的原因;然后,为了提高沿摄像机光轴方向上的位移测量精度,通过在沿摄像机光轴方向上加装一个高精度的激光测距传感器,设计了一种单目摄像机-激光测距...     

The research and preparation of a novel nano biodegradable polymer external reinforcement

The use of current drug-loaded vascular scaffolds is limited in sustained drug release and stability studies in clinical and preclinical trials. We found that poly(l-glutamic acid)-b-poly(propylene oxide)-b-poly(l-glutamic acid) (PLGA-b-PPO-b-PLGA) triblock copolymers can deliver multiple poorly water-soluble drugs (e.g., Paclitaxel) at clinically relevant doses. In this study, we synthesized a new drug-loaded vascular external graft with electrospun nanofibrous scaffolds [poly(l-lactide-co-?-caprolactone) (PLCL):fibrinogen; 2:1 (w/w)] and drug-loaded PLGA-b-PPO-b-PLGA micelles. Cell proliferation and viability assay results showed that beagle smooth muscle cells grew well on the surface of vascular graft-coated micelles at a percentages of 10% (w/w) GPG:PLCL-fibrinogen. This study demonstrates that micelle-coated electrospun PLCL-fibrinogen vascular scaffolds have potential applications in vascular tissue engineering.     

Topological crystalline insulators

The recent discovery of topological insulators has revived interest in the band topology of insulators. In this Letter, we extend the topological classification of band structures to include certain crystal point group symmetry. We find a class of three-dimensional "topological crystalline insulators" which have metallic surface states with quadratic band degeneracy on high symmetry crystal surfaces. These topological crystalline insulators are the counterpart of topological insulators in materials without spin-orbit coupling. Their band structures are characterized by new topological invariants. We hope this work will enlarge the family of topological phases in band insulators and stimulate the search for them in real materials.     

小视角对颜色差别阀的影响

在均匀颜色空间的颜色差别计箅中,亮度和色彩的作用是相关且不同的,尤其是在目标尺度对人眼张角(亦称视角)小于30角度分的条件下观察,由于亮度差和色彩差受视角变化的影响程度不同步,使得人眼颜色差别分辨阈亦不确定。本文通过一定的试验和计算,探讨了在不同的亮度差和色彩差的情况下,颜色差别阈受视角影响的变化规律。     

一维应变压缩下TC4钛合金绝热剪切研究

 利用内径为57 mm的压缩气炮，在撞击速度为0.2~1.2 km/s（相应的靶中压力为3~15 GPa）范围内进行对称碰撞实验，以研究TC4（Ti-Al6-V4）钛合金在一维应变冲击压缩条件下的绝热剪切现象。对回收得到的受冲击样品，在扫描电镜（SEM）下进行细观金相分析。结果指出，一维应变冲击压缩条件下，TC4钛合金中绝热剪切带产生的对称碰撞速度阈值为500 m/s（相当于样品中的压力为5.87 GPa）；主剪切带与冲击方向约为45°角，带上有圆形和椭圆形两种孔洞且随碰撞速度的增大而增多和长大，这是典型的韧性损伤特征。随碰撞速度增大，产生与主剪切带成15°角的支剪切带。这些与理论预言相符。X射线能谱分析结果指出，剪切带内材料发生了(α+β)→β相的转变，是典型的相变带。剪切带的温度估算与实验提供的信息吻合。     

Ge组分分布对基区杂质非均匀分布的SiGe HBT温度特性的影响

众所周知, 双极型晶体管的设计主要是基区的设计. 一般而言, 基区的杂质分布是非均匀的. 本文首先研究了非均匀的杂质高斯分布对器件温度分布、增益和截止频率的温度特性的影响, 发现增益和截止频率具有正温度系数, 体内温度较高. 随后研究了基区Ge组分分布对这些器件参数的影响. 均匀Ge组分分布和梯形Ge组分分布的SiGe 异质结双极型晶体管增益和截止频率具有负温度系数, 具有较好的体内温度分布. 进一步的研究表明, 具有梯形Ge组分分布的SiGe 异质结双极型晶体管, 由于Ge组分缓变引入了少子加速电场, 不但使它的增益和截止频率具有较高的值, 而且保持了较弱的温度敏感性, 在增益、特征频率大小及其温度敏感性、体内温度分布达到了很好的折中.