Efficient gel‐type electrolyte with bismaleimide via in situ low temperature polymerization in dye‐sensitized solar cells

This study reports the characteristics of gel‐type dye‐sensitized solar cells (DSSCs), fabricated with gel‐type electrolyte containing poly‐1,1′‐(methylenedi‐4,1‐phenylene)bismaleimide (PBMI), or poly‐1,1′‐(3,3′‐dimethyl‐1,1′‐biphenyl‐4,4′‐diyl)bismaleimide (PDBBMI), or poly‐N,N′‐(4‐methyl‐1,3‐phenylene)bismaleimide (PMPBMI), prepared by in situ polymerization of the corresponding monomer without an initiator at 30 °C. Incorporating 0.3 wt % content of exfoliated alkyl‐modified nanomica (EAMNM) into PBMI‐gelled electrolyte leads to higher short‐circuit current density (J_sc = 17.14 mA cm^?2) and efficiency (η = 7.02%) than that of neat PBMI‐gel electrolyte (J_sc = 15.32 mA cm^?2, η = 6.41%). Incorporating 0.3 wt % EAMNM into PBMI‐gelled electrolyte results in remarkably stable device performance under continuous light soaking under one sun (100 mW cm^?2) at 55 °C. The efficiency of DSSCs based on PBMI/0.3 wt % EAMNM‐gelled electrolyte drops by only 1.7% (η = 6.93%) after 500 h of continuous light soaking. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Isolation and Characterization of C-phycocyanin from Spirulina Platensis

ＩｎｔｒｏｄｕｃｔｉｏｎＳｐｉｒｕｌｉｎａ，ａｋｉｎｄｏｆｆｉｌｉｆｏｒｍ，ｍｕｌｔｉｃｅｌｕｌａｒａｌｇａｅｔｈａｔｉｓｒｉｃｈｉｎｐｒｏｔｅｉｎ，ｆａｔ，ｖｉｔａｍｉｎ，ｍｉｎｅｒａｌ，ｃｈｌｏｒｏｐｈｙｌ，β－ｃａｒｏｔｅｎｅａｎｄｐｏｌｙｓａ...     

石墨炉原子吸收法测定芦笋罐头中砷

采用石墨炉原于吸收法测定芦笋罐头中砷，加入硝酸铵消除氯化钠的干扰，并以镍作为基体改进剂，方法检出限为0，10μkg-1，特征量为0．80pg，回收申为94％一1。5％。     

Characterization of isomers of oleuropein aglycon in olive oils by rapid‐resolution liquid chromatography coupled to electrospray time‐of‐flight and ion trap tandem mass spectrometry

In this work, rapid‐resolution liquid chromatography (RRLC) coupled to electrospray ionization time‐of‐flight mass spectrometry (ESI‐TOF‐MS) and ion trap multiple mass spectrometry (IT‐MSⁿ) has been applied to separate and characterize eleven isomers of oleuropein aglycon in fourteen Spanish extra‐virgin olive oils. After the extra‐virgin olive oil sample had been dissolved in hexane and cleaned up by a diol‐bonded phase solid‐phase extraction (SPE) cartridge, the eluting extract was resolved in methanol and analyzed on an Angilent 1200 system with a 4.6 × 150 mm, 1.8 µm Zorbax Eclipse plus C18 column. Mass spectrometry was carried out on a Bruker Daltonics microTOF mass spectrometer and a Bruker Daltonics ion trap mass spectrometer. The characterization of isomers of oleuropein aglycon was based on accurate mass data and the isotope function of characteristic fragment ions in the studied compounds by TOF‐MS, and the fragment ions were further confirmed by IT‐MSⁿ. The fragmentation pathway of oleuropein aglycon was successfully elucidated and all possible transformations among isomers of oleuropein aglycon were suggested. Copyright © 2008 John Wiley & Sons, Ltd.     

Study on the effect of different acids on the structure and photocatalytic activity of mesoporous titania

Nanocrystalline mesoporous titania was synthesized via a combined sol–gel process with surfactant-assisted templating method using cetyltrimethyl ammonium bromide (CTAB) as the structure-directing agent. The process was catalyzed by different acid (hydrochloric acid, nitric acid, sulfuric acid, or phosphoric acid). The prepared samples were characterized by XRD, TEM, BET and FT-IR. The photocatalytic activity of the samples was determined by degradation of phenol in aqueous solution. Results showed that different acid had different effect on the structure and crystal phase of the samples. The sample adjusted by phosphoric acid showed highest surface area and photocatalytic activity. The formation mechanism of the samples catalyzed by different acid was also discussed.     

Synthesis,structure and biological activity of diorganotin derivatives with pyridyl functionalized bis(pyrazol‐1‐yl)methanes

Three pyridyl functionalized bis(pyrazol‐1‐yl)methanes, namely 2‐[(4‐pyridyl)methoxyphenyl] bis(pyrazol‐1‐yl)methane (L¹), 2‐[(4‐pyridyl)methoxyphenyl]bis(3,5‐dimethylpyrazol‐1‐yl)methane (L²) and 2‐[(3‐pyridyl)methoxyphenyl]bis(pyrazol‐1‐yl)methane (L³) have been synthesized by the reactions of (2‐hydroxyphenyl)bis(pyrazol‐1‐yl)methanes with chloromethylpyridine. Treatment of these three ligands with R₂SnCl₂ (R = Et, n‐Bu or Ph) yields a series of symmetric 2:1 adducts of (L)₂SnR₂Cl₂ (L = L¹, L² or L³), which have been confirmed by elemental analysis and NMR spectroscopy. The crystal structures of (L²)₂Sn(n‐Bu)₂Cl₂·0.5C₆H₁₄ and (L³)₂SnEt₂Cl₂ determined by X‐ray crystallography show that the functionalized bis(pyrazol‐1‐yl)methane acts as a monodentate ligand through the pyridyl nitrogen atom, and the pyrazolyl nitrogen atoms do not coordinate to the tin atom. The cytotoxic activity of these complexes for Hela cells in vitro was tested. Copyright © 2010 John Wiley & Sons, Ltd.     

New Sesquiterpenes from the Roots and Stems of Aristolochia Mollissima

Two new sesquiterpenes, madolins Y ( 1 ) and Z ( 2 ) were isolated from the dried roots and stems of Aristolochia mollissima, and their structures were determined by spectroscopic methods.     

Manipulation of atom-to-molecule conversion in a magnetic lattice

Atom-to-molecule conversion by the technique of optical Feshbach resonance in a magnetic lattice is studied in the mean-field approximation. For the case of a shallow lattice, we give the dependence of the atomto-molecule conversion efficiency on tunnelling strength and atomic interaction by taking a double-well as an example. We find that one can obtain a high atom-to-molecule conversion by tuning the tunnelling and interaction strengths of the system. For the case of a deep lattice, we show that the existence of the lattice can improve the atom-to-molecule conversion for certain initial states.