Facile fabrication of novel cyclomatrix-type polyphosphazene nanotubes with active hydroxyl groups via an in situ template approach

Novel polyphosphazene nanotubes with active hydroxyl groups were fabricated via an in situ template approach under ultrasonic irradiation. SEM and TEM results indicated that the nanotubes were uniform with length of several micrometers, inner diameter of ca. 20 nm and outer diameter of 60-80 nm. FTIR spectra revealed that the content of the hydroxyl groups on the nanotube surface was dependent on the feed ratio of hexachlorocyclotriphosphazene (HCCP) to 4,4′-sulfonyldiphenol. The successful esterification of polymer nanotubes with benzoxy chloride demonstrated the high reactivity of the hydroxyl groups. The method employed here might provide a simple and effective way to prepare functional nanotubes used for biological applications.     

Device research on GaAs-based InAlAs/InGaAs metamorphic high electron mobility transistors grown by metal organic chemical vapour deposition

This paper applies a novel quad-layer resist and e-beam lithography technique to fabricate a GaAs-based InAlAs/InGaAs metamorphic high electron mobility transistor (HEMT) grown by metal organic chemical vapour deposition (MOCVD). The gate length of the metamorphic HEMT was 150~nm, the maximum current density was 330~mA/mm, the maximum transconductance was 470~mS/mm, the threshold voltage was -0.6~V, and the maximum current gain cut-off frequency and maximum oscillation frequency were 102~GHz and 450~GHz, respectively. This is the first report on tri-termination devices whose frequency value is above 400~GHz in China. The excellent frequency performances promise the possibility of metamorphic HEMTs grown by MOCVD for millimetre-wave applications, and more outstanding device performances would be obtained after optimizing the material structure, the elaborate T-gate and other device processes further.     

温度对潜望式激光通信终端SiC反射镜性能影响

分析了温度梯度和均匀温度对潜望式激光通信终端反射镜形变的影响,利用椭圆域上的Zernike多项式对椭圆反射镜的波前进行拟合,计算由于热形变导致的波前畸变误差,给出了星间激光通信终端反射镜均方根值、发射光束瞄准误差、接收端光强随温度梯度和均匀温度的变化关系。结果表明:温度梯度对反射镜的影响只是引起峰值光强的漂移和少许下降,当温度梯度为14 ℃/m时瞄准误差达2.1 μrad。均匀温度会引起接收端的光强分布变化,从而导致很大的瞄准误差和光强衰减,当均匀温度与参考温度的差值小于0.6 ℃时,由波前畸变误差引起的瞄准误差小于1 μrad,当差值大于0.6 ℃时,瞄准误差突然增大到几μrad,接收端光强分布发生变化,此时反射镜热形变引起的像散项对光强分布起重要作用。     

Biharmonic hypersurfaces with three distinct principal curvatures in spheres

We obtain a complete classification of proper biharmonic hypersurfaces with at most three distinct principal curvatures in sphere spaces with arbitrary dimension. Precisely, together with known results of Balmu?‐Montaldo‐Oniciuc, we prove that compact orientable proper biharmonic hypersurfaces with at most three distinct principal curvatures in sphere spaces are either the hypersphere or the Clifford hypersurface with and . Moreover, we also show that there does not exist proper biharmonic hypersurface with at most three distinct principal curvatures in hyperbolic spaces .     

ISG-FHEV等效燃油消耗最小控制策略

针对室内复杂环境下火灾识别准确率会降低的问题,提出了一种改进的粒子群算法优化支持向量机参数进行火灾火焰识别的方法。首先在 颜色空间进行火焰图像分割,对获得的火焰图像进行预处理并提取相关特征量;其次采用PSO算法搜索SVM的最优核参数和惩罚因子,并在PSO算法中加入变异操作和非线性动态调整惯性权值的方法,加快了搜索SVM最优参数的精度和速度;然后将提取的火焰各个特征量作为训练样本输入SVM模型进行训练,并建立参数优化后的SVM分类器模型;最后将待测试样本输入SVM模型进行分类识别。算法的火灾识别准确率达到94.09%,分类效果明显优于其他分类算法。仿真结果表明,改进的PSO优化SVM算法提高了火焰识别的准确率和实时性,算法的自适应性更强,误判率更低。     

Stampacchia generalized vector quasi-equilibrium problem with set-valued mapping

In this paper, the solvability of Stampacchia generalized vector quasi-equilibrium problem (in short, GVQEP) with set-valued mapping is studied. By using continuous selection theorem and fixed point theorems, some existence theorems for (GVQEP) are obtained without any monotonicity assumption. These theorems unify and improve some results in the recent references.     

精确预言双原子分子Q线系高振转激发态的跃迁谱线

用多重差分的方法,从双原子分子跃迁谱线的普遍表达式出发,已经建立起了预言双原子分子P线系高激发振转跃迁谱线的解析物理公式。采用同样的方法,充分利用现有实验条件下测定的部分振转跃迁谱线数据,文章建立了预言双原子分子Q线系高激发振转跃迁谱线的物理公式。使用该公式和一组经过物理筛选的(15条)精确的实验跃迁谱线,研究了IrN分子A1Π—X1Σ+跃迁系统中(4,1),(3,1)跃迁带的Q支发射光谱。结果表明,该公式不仅很好地重复了所有已知的实验光谱数据,且正确预言了实验没有获得的很多高转动量子态的未知发射谱线,从而提供了一种新的预言高转动量子态的未知跃迁谱线的物理方法。     

大口径多层介质膜光栅衍射效率测量及其在制作工艺中的应用

多层介质膜光栅是高功率激光系统的关键光学元件.为了满足国内强激光系统的迫切需求, 在大口径多层介质膜光栅的研制过程中,建立了单波长自准直条件下的衍射效率测量方法及其误差分析. 结果表明误差主要由探测器的噪声和测试人员的差异产生,对衍射效率测试精度的影响是±1%. 在此基础上,将光栅衍射效率及其分布测量技术应用于光栅制作工艺中, 作为大口径光栅无损检测的一种手段,如判断光栅掩模是否能进行离子束刻蚀、 离子束刻蚀的在线监测和是否需要再刻蚀,从而实现对大口径多层介质膜光栅离子束刻蚀过程的定量、 科学控制,提高了离子束刻蚀光栅制作工艺的成功率.利用上述技术,已成功研制出多块最大尺寸为 430 mm× 350 mm、线密度1740线/mm、平均衍射效率大于95%的多层介质膜光栅. 实验结果表明,该方法操作简单、测量快速准确,不必检测光栅微结构. 为大口径多层介质膜光栅研制的无损检测工程化奠定了基础.     

Lipschitz Estimates for Commutators of $N$-Dimensional Fractional Hardy Operators

In this paper, it is proved that the commutator$\mathcal{H}_{β,b}$ which is generated by the $n$-dimensional fractional Hardy operator $\mathcal{H}_β$ and $b\in \dot{Λ}_α(\mathbb{R}^n)$ is bounded from $L^P(\mathbb{R}^n)$ to $L^q(\mathbb{R}^n)$, where $0<α<1,1相似文献   

环境气体种类对激光烧蚀粒子速度劈裂的影响

采用蒙特-卡罗(Monte Carlo)方法, 模拟了激光烧蚀粒子输运动力学过程, 在环境气体压强为100 Pa的情况下, 研究了环境气体种类(He, Ne, Ar和假想气体等)对烧蚀粒子速度劈裂的影响. 研究结果表明, 在四种环境气体中传输的烧蚀粒子均出现了速度劈裂现象, 形成速度劈裂所需时间按He, Ne, 假想气体和Ar的次序减小. 还研究了环境气体分子的质量和半径对烧蚀粒子速度劈裂的影响, 形成速度劈裂所需时间随环境气体分子半径(或质量)增大而减小. 在假想气体中, 两速度峰强度相等时的强度最小. 结合欠阻尼振荡模型和惯性流体模型, 对劈裂的形成时间进行了解释. 所得结论可为进一步定量研究纳米晶粒生长机理提供基础.