Determination of phosphate in hydroponic nutrient solutions using flow injection potentiometry and a cobalt-wire phosphate ion-selective electrode

The direct flow injection potentiometric (FIP) analysis of phosphate in hydroponic nutrient solution has been carried out using a cobalt-wire ion-selective electrode (ISE). Synthetic hydroponic nutrient solution, commercial hydroponic nutrient solution and working hydroponic farm nutrient solution were analysed for phosphate using the FIP technique. It is shown that FIP results compare favourably to standard methods of analysis such as spectrophotometry and indirect photometric ion-pair chromatography. Reproducible FIP response curves with a slope of −(47.57±0.03) mV per decade and intercept of −(169.7±0.1) mV were obtained for four separate calibrations in the concentration range 5.0×10⁻⁴–1.0×10⁻² M H₂PO₄⁻. Anion corrections for interferences by Cl⁻, NO₃⁻ and SO₄²⁻ were applied to all samples using the selectivity coefficients determined independently using a fixed interference method. Nevertheless, it was found that anion corrections were not necessary, as the deviations fell within the bounds of experimental error for the cobalt-wire ISE technique (i.e.±2–5% R.S.D.). The proposed FIP method enables the direct determination of phosphate in hydroponic nutrient solutions.     

Struktur und Reaktivität eines Triazolobenzodiazepin/Oxalylchlorid-Addukts

Structure and Reactivity of a Triazolo-benzodiazepine/Oxalyl Chloride Adduct Reaction of oxalyl chloride with N, N-dimethyl-{8-chloro-6-(0-fluorophenyl)- 4H, 11 H-[1,2,4]triazolo [1,5-α] [1,4]benzodiazepine}-2-carboxamide ( 6a ), the syn-thesis of which is described, leads to the cyclic adduct N, N-dimethyl-{2,12,12-trichloro-13a-(0-fluorophenyl)-11-oxo-10,11,12,13a-tetrahydro-5H, 9H-[1,3]oxazolo [3,2-d] [1,2,4]triazolo [1,5-a] [1,4]benzodiazepine}-7-carboxamide ( 7a ). Upon thermolysis 7a is partly reconverted to the starting diazepine 6a via loss of the elements of oxalyl chloride. Reduction of 7a with sodium borohydride also yields 6a in addition to its dihydro derivative 9 . Energetic treatment of 7a with sodium methoxide leads to the unexpected methoxydiazepines 10a and 10b , and mild treatment of 7a with sodium methoxide to the stereoselective formation of the two precursors of 10 , namely the chloromethoxy derivative 11 and the dimethoxy derivative 12 . Epimerization of 11 followed by nucleophilic substitution gives a mixture of two dimethoxy compounds, 12 and its epimer 14 . The configurational assignments of these derivatives are based upon X-ray analysis of 12 . A possible pathway for this unexpected substitution reaction is proposed.     

Kettenverlängerung am P2(SiMe3)4 durch Reaktion mit LiBu

Extension of the Chain Length of P₂(SiMe₃)₄ by Reaction with LiBu The first steps of the reaction of P₂(SiMe₃)₄ 1 with LiBu in THF, which finally yields Li₃P₇ among other P-rich phosphides while P(SiMe₃)₃ and LiP(SiMe₃)₂ are simultaneously split off, were investigated by means of ³¹P-NMR spectroscopy. At ?20°C first of all one Si? P bond is cleaved generating Li(Me₃Si)P? P(SiMe₃)₂ 2 as well as BuSiMe₃. Subsequently 2 forms Li(Me₃Si)P? P(SiMe₃)? P(SiMe₃)₂ 5 and LiP(SiMe₃)₂ 4 in equimolar ratios. This clearly demonstrates that both compounds are generated in one single reaction step. This behaviour is caused by the different basicity of the respective P-atoms in 2 , which necessarily results in a multicentered mechanism.     

Synthesis of Phenyl- and Benzyl-Substituted Pyrrolidines and of a Piperidine by Intramolecular C-Alkylation. Synthons for tricyclic skeletons

The construction of new or novelly functionalized annulated and bridged tricylic compounds by two consecutive C,C-bond formations (a and b in la , Scheme 1) is described. In a first step, chloroalkyl-substituted aminonitriles yielded pyrrolidines 8 , 15a , 15b , 23 , 25 and piperidine 18 by carbanionic ring closure (Schemes 5, 6, 7 and 8). Subsequent Friedel-Crafts cyclization transformed the β-aminonitriles 8 , 15a , 15b , and 18 either directly or via their carboxylic acid derivatives to the indeno [1, 2-c]pyrrole, 2, 5-methano-3-benzazocine, benz [f]isoindoline and 1, 4-ethano-2-benzazapine skeletons 11 , 16a , 16b and 21 , respectively (Schemes 5, 6 and 7). By classical ring expansion reactions the pyrrolo [3, 4-c]isoquinoline and benzopyrano-[3, 4-c]pyrrole skeletons 28 resp. 31 were obtained from 11 (Scheme 9).     

L'acide hydroxylamine-O-sulfonique,réactif de choix pour la conversion d'aldéhydes en nitriles

Hydroxylamine-O-sulfonic acid: a convenient reagent for the conversion of aldehydes into nitriles . Hydroxylamine-O-sulfonic acid (HAS) proved to be an excellent reagent for the conversion of aliphatic, aromatic and heteroatomic aldehydes into nitriles. There, aldehydes in the form of suspension in HAS water solution, react rapidely to give the corresponding nitriles in high yield. Only with formylpyridines could the intermediate oxime-O-sulfonic acids be isolated.     

Chemical composition of “AKD vapour” and its implication to AKD vapour sizing

Alkyl ketene dimer (AKD) sizing of paper involves the redistribution of the wax over the fibre surface upon heating. The two major mechanisms widely studied so far are the spreading of an autophobic precursor of molten AKD and AKD vapour transport and re-deposition on the fibre surface. All previous work assumed that the transport of AKD vapour could be expressed by the change of water contact angle with substrates that were exposed to the vapour. Information regarding the chemical composition of the vapour phase above the AKD wax has not been found in the literature. In this work, a simple method for analysing the chemical composition of the vapour is established. Our preliminary results indicated that the chemical composition of AKD vapour in the temperature range of 75–80 °C is dominantly fatty acids. This suggests that the sizing effect by actual AKD molecules via the vapour deposition mechanism is likely to be insignificant in this temperature range. This also implies that fatty acids play a positive role in AKD sizing. The chemical stability of AKD in this temperature range is also studied.     

Transition metal nitrosyls as nitrosylation agents : II.Photo-nitrosylation of η5-C5H5V(CO)3L(L = CO,Pz3) by [Co(NO)2Br]2

η⁵-C₅H₅V(NO)₂CO is prepared in 40% yield by the photo-reaction between η⁵-C₅H₅V(CO)₄ and [Co(NO)₂Br]₂.η⁵-C₅H₅V(NO)₂CO reacts by an S_N1 mechanism with various phosphines PZ₃ to yield η⁵-C₅-H₅V(NO)₂PZ₃. The phosphine complexes are also obtained by photo-induced ligand interchange between η⁵-C₅H₅V(CO)₃PZ₃ and [Co(NO)₂Br]₂, or η⁵-C₅H₅V(CO)₄ and Co(NO)₂Br(PZ₃). In all cases, the main cobalt species formed is Co(NO)(CO)₃. While the one-bond vanadiumphosphorus coupling constants of most of the phosphine complexes are virtually the same (ca 410 Hz),the chemical shift values δ(⁵¹V) (?1328 to ?973 ppm rel. VOCl₃) decrease in the order PF₃ > CO > P(OR)₃ > P(alkyl)₃ > PPh₃ > PPh(NEt₂)₂, reflecting the decreasing π-acceptor ability of the ligands. δ(⁵¹V) also decreases in the series of alkylphosphines PR₃ (R = Me, Et, Prⁿ, Buⁱ, Prⁱ, BU^t) as the cone angle of PR₃increases.     

Evidence for a trigonal twist mechanism involving a phosphite ligand of Os3(CO)7,[P(OMe)3]5

The fluxional molecule Os₃(CO)₇[P(OMe)₃]₅ has been prepared from OS₃(CO)₁₂ and P(OMe)₃ by a combination of thermal and UV irradiation synthetic methods. An investigation by ³¹P and ¹³C NMR spectroscopy indicated that the mechanism of fluxionality in this compound probably involves the P(OMe)₃ ligand of the Os(CO)₃[P(OMe)₃] unit moving from one equatorial site to the other via a trigonal twist mechanism.     

Water adsorption in disordered mesoporous silica (Vycor) at 300 K and 650 K: a Grand Canonical Monte Carlo simulation study of hysteresis

This numerical simulation paper focuses on the adsorption/desorption of water in disordered mesoporous silica glasses (Vycor-like). The numerical adsorbent was previously obtained by off lattice method, and was shown to reproduce quite well the micro- and mesotextural properties of real Vycor, as well as morphological (pore size distribution) and topological (pore interconnections) disorder. The water-water interactions are described by the SPC model while water-silica interactions are calculated in the framework of the PN-TrAZ model. The water adsorption/desorption isotherms and the configurational energies are calculated by the Grand Canonical Monte Carlo simulation method. The low pressure results compare well with experiments, showing the good transferability of the intermolecular potential. It is shown that if the hysteresis loop observed in the adsorption/desorption isotherm is considered as a true phase transition (which is actually still an open question in the case of disordered porous materials), then it is possible to calculate the grand potential by applying the thermodynamic integration scheme. The grand potential is shown to be multivalued for low (subcritical) temperature, and continuous for high (supercritical) temperature. A coexistence point is found within the hysteresis loop, actually close to the vertical desorption line. Below the equilibrium chemical potential, the gaslike branch is stable whereas the liquidlike branch is metastable. The situation is reversed above the coexistence point.