Non-linear calibration functions in ion chromatography with suppressed conductivity detection using hydroxide eluents

The linearity of calibration curves in ion chromatography with suppressed conductivity detection using hydroxide eluents was investigated. Theoretical calibration curves were derived for strong electrolytes and weak monobasic acids and the results compared with experimental data. At low concentrations up to 1 micromol l(-1) the autoprotolysis of water induces left-curved calibration functions even for strong electrolytes like nitrate. The experimental data are best described by a quadratic function, the differences between linear and quadratic regression being up to 10%. At higher concentrations the calibration curves for strong electrolytes are linear. Due to incomplete dissociation, the calibration curves for weak mono- and dibasic acids show a right curvature. Thus, depending on the analyte and the concentration range of interest, analysts should carefully choose between a linear and a quadratic regression function.     

Crystal violet combined with Merocyanine 540 for the ex vivo purging of hematopoietic stem cell grafts

The purpose of this study was to determine in a preclinical purging model, how effective crystal violet-mediated photodynamic therapy (CV-PDT) is against solid tumor and drug-resistant mutant tumor cells, and if certain limitations of CV-PDT can be overcome by using crystal violet (CV) in combination with the membrane-active photosensitizer, Merocyanine 540 (MC540). When used under conditions that preserved an adequate fraction of normal human granulocyte/macrophage progenitors (CFU-GM), CV-PDT failed to achieve meaningful reductions of DU145 prostate, H69 small cell lung cancer, and MDA-MB-435S breast cancer cells. Melphalan-resistant L1210/L-PAM1, adriamycin-resistant P388/ADR, and adriamycin-resistant HL-60/ADR leukemia cells were markedly less sensitive to CV-PDT than their wild-type counterparts, whereas cisplatin-resistant H69/CDDP cells were more sensitive than wild-type H69 cells. Sequential exposure to MC540- and CV-PDT under conditions that preserved an adequate fraction (73% and 29%, respectively) of normal CD34-positive hematopoietic stem cells and granulocyte/macrophage progenitors was highly effective against H69 (99.997% reduction) and H69/CDDP (99.999% reduction) cells, but ineffective against HL-60/ADR, MDA-MB-435S, and DU145 cells. CV thus shows only limited promise as a single-modality purging agent. However, in certain situations, clinically meaningful tumor cell depletions can be obtained by using CV in combination with a second photosensitizer such as MC540.     

Bildung siliciumorganischer Verbindungen. 70 [1]. Reaktionen Si-fluorierter 1,3,5-Trisilapentane mit CH3MgCl und LiCH3

Formation of Organosilicon Compounds. 70. Reactions of Si-fluorinated 1,3,5-Trisilapentanes with CH₃MgCl and LiCH₃ F₃Si? CCl₂? SiF₂? CH₂? SiF₃ 3 reacts with meMgCl. (me = Ch₃ starting with a Si-methylation and not with a C-metallation as in the corresponding Si- and C-chlorinated compounds, e. g. (Cl₃Si? CCl₂)₂SiCl₂ [2]. A CCl-hydrogenation is observed too, which in the case of F₃Si? CCl₂? SiF₂? CHCl? SiF₃ 4 gives meS₃Si? CCl₂? Sime₂? CH₂? Sime₃. (F₃Si? CCl₂)_{2 5} reacts with meMgCl to form preferentially 1,2-Disilapropanes by cleaving a Si? Cbond. The isolation of F₃Si? CCl₂H and meF₂Si? CCl₂? SiF₂me allows to locate the bond where 5 is cleaved at the beginning of the reaction. With meLi 5 reacts to form mainly me₃Si? C?C? Sime₃, showing that in the reaction of meLi, being a stronger reagent than meMgCl, and 5 a C-metallation occurs, following the same mechanism as in the reaction with (Cl₃Si? CCl₂)₂)SiCl₂ [2]. The reaction conditions for the synthesis of Si-fluroinated and C-chlorinated 1,3,5-Trisilapentanes in a 0.1 mol scale are reported. N.m.r. data of all investigated compounds are tabulated.     

Column chromatographic separation of gallium, indium and thallium

Distribution ratios are given for the extraction of gallium-(III), indium(III) and thallium(III) from aqueous solutions of hydrobromic acid into di-isopropy ether and isobutyl methyl ketone. Based on the results obtained, a scheme is presented for the quantitative separation of these elements from each other by liquid-liquid partition chromatography. The effect of a number of other metal ions upon the separation is also studied. The separation method has been applied to the analysis of a series of lead-indium alloys.     

Double indication in catalytic-kinetic analysis: simultaneous photometric and thermometric indication of the iodine-azide reaction in closed and flow systems

The iodine—azide reaction catalyzed by sulphur-containing compounds is followed simultaneously by optical and thermometric measurements in closed and flowing systems. In the closed system, thiosulphate can be determined in the range 32.4–324 μg ml^-1, by observing the turbidity caused by the nitrogen formed during the reaction and the temperature changes. With the flow apparatus, thiosulphate can be determined in the range 112–1120 μg ml^-1 by continuously mixing the sample and reagent solutions. H₂S in nitrogen 5–100 ppm) is measured by sweeping the gas into the reaction Cuvette. In a third flow procedure, H₂S is liberated continuously from sodium sulphide solutions (0.1–10 μg S^2- ml^-1) by ascorbic acid, and swept to the measuring cuvette with nitrogen.     

Chemically modified resins for solid-phase extraction

The packings most widely used for solid-phase extraction are hydrophobic and make poor surface contact with aqueous samples unless the resins are first treated with an activating organic solvent such as methanol. Insertion of an acetyl- or hydroxymethyl group into a porous polystyrene-divinylbenzene resin provides a more hydrophilic surface that is easily wetted by water alone. Small columns of the chemically modified resins were found to be very efficient for the solid-phase extraction of many types of organic solutes from aqueous samples. Comparative recovery studies showed that the modified resins are superior to both silica packings and unmodified organic resins for the solid-phase extraction of organic compounds, and especially for polar organics such as phenols.     

Neue Derivate der 2-Acylamino-thiophen-(und-benzo[b]thiophen-)-3-carbonsäure sowie des ([1]Benzo-)Thieno[2,3-d]-pyrimidin-4(3H)-ons

The title substances1 and2 were prepared by acylation of the corresponding ethyl 2-amino-thiophene- (or:-4,5,6,7-tetrahydro-benzo[b]thiophene)-3-carboxylates, in some cases followed by reactions introducing a basic substituent.Additionally a group of 2-aroylamino-thiophene-(or:-4,5,6,7-tetrahydro-benzo[b]thiophene)-3-carboxamides was subjected to ring closure reactions, yielding the corresponding 2-aryl-thieno[2,3-d]pyrimidin-4(3H)-ones and 2-aryl-[1]benzothieno[2,3-d]pyrimidin-4(3H)-ones (both:3).

---

---

Zum Teil unter Mitarbeit vonFerdinand Fuhrmann     

Synthesis of aryleneisopropylidene polymers

Linear, high molecular weight aryleneisopropylidene (AIP) polymers have been synthesized via Friedel-Crafts alkylation reactions. Monomers such as p-bis-2-chloroiso-propylbenzene condense readily with arylene compounds of high electron density such as naphthalene and diphenyl ether. Catalytic amounts of tritylhexafluoroarsenate catalysts in combination with aluminum chloride and nitrobenzene direct the synthetic reactions towards a pure AIP structure. Side reactions which give polyindane structures through dimerization of p-bis(2-chloroisopropyl)benzene are eliminated when the polymerization temperature is kept below ?20°C. The preferred solvents are chlorinated compounds. A wide range of structural modifications and properties can be obtained by varying the monomer combinations. Desirable physical properties of AIP polymers include clarity, rigidity, impact toughness, oxidative stability, and resistance to stress cracking.     

Anion-exchange separation of metal ions in dimethyl sulphoxide-methanol-hydrochloric acid

The effect of dimethyl sulphoxide on the anion-exchange behaviour of many metals m a methanolic system with hydrochloric acid was explored. Distribution coefficients for 26 elements were determined in a mixed solvent system of dimethyl sulphoxide-methanol-0.6M hydrochloric acid, in which the proportions of dimethyl sulphoxide and methanoi were varied. Lead(II) and silver(I) complexes are soluble in this system. Interesting effects were noted for gold(III), iron(III), molybdenum(VI) and uranium(VI). As a measure of the usefulness of the systems studied, 27 anion-exchange separations of two- to four-component mixtures of metal ions were carried out, each with quantitative results.