Strategy for Good Dispersion of Well‐Defined Tetrapods in Semiconducting Polymer Matrices

The morphology or dispersion control in inorganic/organic hybrid systems is studied, which consist of monodisperse CdSe tetrapods (TPs) with grafted semiconducting block copolymers with excess polymers of the same type. Tetrapod arm‐length and amount of polymer loading are varied in order to find the ideal morphology for hybrid solar cells. Additionally, polymers without anchor groups are mixed with the TPs to study the effect of such anchor groups on the hybrid morphology. A numerical model is developed and Monte Carlo simulations to study the basis of compatibility or dispersibility of TPs in polymer matrices are performed. The simulations show that bare TPs tend to form clusters in the matrix of excess polymers. The clustering is significantly reduced after grafting polymer chains to the TPs, which is confirmed experimentally. Transmission electron microscopy reveals that the block copolymer‐TP mixtures (“hybrids”) show much better film qualities and TP distributions within the films when compared with the homopolymer‐TP mixtures (“blends”), representing massive aggregations and cracks in the films. This grafting‐to approach for the modification of TPs significantly improves the dispersion of the TPs in matrices of “excess” polymers up to the arm length of 100 nm.     

Coulomb attraction during the carpet growth mode of NaCl

The submonolayer growth of NaCl bilayer high-rectangular shaped islands on Ag(111) is investigated at around room temperature by using low temperature scanning tunneling microscopy. The growth at the step edges is preferred. Two kinds of islands are observed. They either grow with their non-polar edge at the step edge of Ag(111) or the islands overgrow in a carpet-like mode with the polar direction parallel to the edge. In the latter case, the Ag step is rearranged and considerable, while the NaCl layer is bent. This study clarifies the nature of the interaction of an alkali halide nanostructure with a metal step edge.     

Nanocellulose Polymer Composites as Innovative Pool for (Bio)Material Development

Summary: Using a “never-dried” procedure (according to Figure 4) shaped bacterial nanocellulose (BC, 1% cellulose, 99% water) has been modified by the formation of BC-polymer composites. For this purpose, acrylate and methacrylate monomers and methacrylate crosslinkers were photopolymerized inside an ethanol-swollen nanofiber network. Using the ethanol as solvent and as confirmed by model reactions the synthetic polymer (SP) part of the composites is constructed of crosslinked polymers (number of repeating units in the range of 500). As part of ongoing work on the development of (bio)materials from the innovative pool of BC composites these investigations are recently directed towards the creation of collagen-like materials. Thus, for these purposes, mainly water absorption capacity, strength, and elasticity have to be controlled, whilst still retaining essential features of BC like shape, nanofiber network, pore system, and proved biocompatibility. Using acrylic acid, 2-ethylhexyl acrylate, 2-hydroxyethyl methacrylate, N-vinyl pyrrolidone as acrylate monomers and triethylene glycol dimethacrylate and 1,4-butandiol dimethacrylate as crosslinkers of different concentrations either a filling of the pores or a coating of the fibers in the BC nanocomposites could be achieved. The small cellulose content of the composites significantly increases the water absorption value and the strength of the material as well as the ability of re-swelling in the case of fiber coated composites. Sample 12 is an optimized BC-SP composite regarding important properties of hyaline cartilage like Young's modulus in the range of 5–20 MPa using the well-known Simplex-method.     

Total Synthesis of α-Tocopherol through Enantioselective Iridium-Catalyzed Fragmentation of a Spiro-Cyclobutanol Intermediate

A conceptionally new strategy for the asymmetric (2R-selective) synthesis of α-tocopherol (vitamin E) was developed. In the stereocontrolled key step, a prochiral spiro[chromane-2,3′-cyclobutanol] unit is effectively desymmetrized under C−C bond activation in an unprecedented iridium-catalyzed transformation using (S)-DTBM-SegPhos as a chiral ligand (e.r. 97:3). To complete the synthesis, the side chain was attached through Ru-catalyzed cross-metathesis employing an alkene derived from (R,R)-hexahydrofarnesol. To suppress epimerization during the final hydrogenation, PtO₂ had to be used as a catalyst instead of Pd/C. In an alternative approach (employing a propargyl-substituted spiro-cyclobutanol), the side chain was constructed prior to the Ir-catalyzed ring fragmentation (>99:1 d.r.) through enyne cross-metathesis (using an alkene derived from (R)-dihydrocitronellal) followed by Cr-catalyzed 1,4-hydrogenation and (diastereoselective) Pfaltz hydrogenation of the resulting triple-substituted olefin. The work demonstrates the potential of iridium catalysis for enantioselective C−C bond activation.     

A density-functional theory study of the confined soft ellipsoid fluid

A system of soft ellipsoid molecules confined between two planar walls is studied using classical density-functional theory. Both the isotropic and nematic phases are considered. The excess free energy is evaluated using two different Ans?tze and the intermolecular interaction is incorporated using two different direct correlation functions (DCF's). The first is a numerical DCF obtained from simulations of bulk soft ellipsoid fluids and the second is taken from the Parsons-Lee theory. In both the isotropic and nematic phases the numerical DCF gives density and order parameter profiles in reasonable agreement with simulation. The Parsons-Lee DCF also gives reasonable agreement in the isotropic phase but poor agreement in the nematic phase.     

Leaching of the Anthraquinone Dye Solvent Blue 59 Incorporated into Organically Modified Silica Xerogels

The effects of preparation method and precursor composition on the leaching behavior of the anthraquinone dye Solvent Blue 59 incorporated into silica based xerogels have been studied. Xerogels were prepared under acidic conditions from mixtures of 20 mol% of organically modified silicon alkoxides, R–Si(OR)3, in Si(OR)4 (R = methyl or ethyl, R = methyl, vinyl, phenyl). The dye was added at the beginning of the sol-gel reaction. The reaction was carried out by either hydrolysis under acidic conditions or acidolysis by formic acid. The dye incorporated was leached with refluxing ethanol using a Soxhlet extraction procedure to simulate the long-term stability of the samples prepared. With increasing size of organic substituent (methyl < vinyl < phenyl), the amount of dye leached decreases. Results from nitrogen adsorption experiments show that all samples characterized have about the same average pore diameter, but they differ in total pore volume and BET surface area. With increasing size of the organic residue, the pore volume decreases by an order of magnitude. Therefore, it is concluded that the microstructure of the xerogels prepared determines the retention behavior of dyes incorporated during the sol-gel reaction.     

Influence of sequence correlations on the adsorption of random heteropolymers onto homogeneous planar surfaces

Using a reference system approach, we develop an analytical theory for the adsorption of random heteropolymers with exponentially decaying and/or oscillating sequence correlations on planar homogeneous surfaces. We obtain a simple equation for the adsorption--desorption transition line. This result as well as the validity of the reference system approach is tested by a comparison with numerical lattice calculations.