Development and characterisation of a new interface for coupling capillary LC with collision-cell ICP–MS and its application for phosphorylation profiling of tryptic protein digests

A comparison of different nebulisers for direct hyphenation of capillary and nano liquid chromatography (Cap-LC, Nano-LC) and quadrupole-based collision cell inductively coupled plasma mass spectrometry (CC-ICP–MS) for phosphorylation profiling of tryptic protein digests is described. Helium was used as cell gas and specially tuned instrumental conditions were used to achieve background minimisation at the mass of phosphorus, because of kinetic energy discrimination of the interfering polyatomic ions. The proposed set-up is based on a modified capillary electrophoresis interface and a home-made 4 mL spray chamber. It enables the use of gradient conditions with a highly concentrated organic mobile phase as often used in protein phosphorylation analysis, without the need to apply membrane desolvation for removal of the organic phase or further background minimisation. No significant signal suppression or other negative effects caused by the organic mobile phase occur, because of the low flow rates used in Cap-LC and the robust plasma conditions of the CC-ICP–MS instrument. A tryptic digest of beta-casein was investigated as model compound to demonstrate the applicability of the proposed set-up for phosphorylation profiling in protein analysis using quadrupole based collision-cell ICP–MS as phosphorus-specific detector. Detection limits for phosphorylated peptides down to the sub picomole level were obtained. As a complementary technique, electrospray ionisation tandem mass spectrometry (ESI–MS–MS) with data base searching was used for further characterisation of the phosphorylated peptides detected.     

Dynamics studies on thermoresponsive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) hydrogel in tetrahydrofuran/water mixtures

The properties of thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogel in tetrahydrofuran/H₂O mixtures were studied. Scanning electron microscopic (SEM) images demonstrate that the hydrogel changes from homogeneous to heterogeneous microstructure upon the addition of tetrahydrofuran to water. This heterogeneous PNIPAAm hydrogel in the mixture solvent exhibits a very slow response rate at temperatures above its lower critical solution temperature. The decreased response rate is attributed to the formation of special ternary complexes including the polymer and the two solvents in the tetrahydrofuran/H₂O mixture. Factors controlling the thermoresponse rate are discussed further and several suggestions are provided for designing and developing fast-response PNIPAAm hydrogels in the future.     

Determination of oxaliplatin in human plasma and plasma ultrafiltrate by graphite-furnace atomic-absorption spectrometry

A method for sensitive determination of the anti-cancer agent oxaliplatin in human plasma and human plasma ultrafiltrate (pUF) is presented. The method is based on the quantification of platinum by graphite-furnace atomic-absorption spectrometry, with Zeeman correction and an atomisation temperature of 2,700°C. Sample pretreatment involves dilution of the samples with a solution containing 0.15 mol L^–1 NaCl and 0.20 mol L^–1 HCl in water. Validation was performed in accordance with the most recent FDA guidelines for bioanalytical method validation. All results were within requirements. The validated ranges of quantification were 0.10–400 mol L^–1 for human pUF and 0.50–400 mol L^–1 for plasma. The assay is now successfully used to support pharmacokinetic studies of cancer patients treated with oxaliplatin.     

Unusual reactivity of ortho-carbonylphenylboronic acids with diethanolamine

The reaction of carbonyl-substituted phenylboronic acids with diethanolamine has been investigated. For compounds containing carbonyl groups at the meta or para positions the reaction occurs exclusively at the boronic acid. Different reactivities were observed for ortho-substituted acetyl- and formylphenylboronic acids where the reaction occurred at both the boronic acid and at the carbonyl group. X-ray studies revealed the presence of a polycyclic structure with tetravalent boron and nitrogen atoms.     

A combinatorial approach to obtain affinity media with binding properties towards the aflatoxins

In our work we performed a combinatorial solid-phase synthesis in aqueous medium to prepare peptide libraries from which to select an amino acid sequence with binding properties towards aflatoxins.We used polystyrene beads, functionalised with carboxylic groups as solid support and eight amino acids as monomers. During the first step 64 different sequences of two amino acids were prepared by exploiting the principles of combinatorial chemistry; then the binding properties of all sequences towards aflatoxin B(1 )were checked. We determined binding constants towards aflatoxin B(1) and towards aflatoxins B(2), G(1) and G(2). Results were promising, so we prepared a new library by using the selected dipeptide as the starting solid phase. After selecting the best tetrapeptide sequences, we determined binding constants towards the quoted aflatoxins. We obtained binding constants ( K>10(4) M(-1)) similar to those shown by human serum albumin for similar compounds. Preliminary studies on an extraction column were promising for the development of an SPE system and for its application in food matrices.     

Enantiomers of sterically hindered n-aryl-4-pyridones: Chromatographic enrichment and thermal interconversion

N-Aryl-4-pyridones 1–6 were synthesized by condensation of the corresponding 4-pyrone with anilines. The enrichment of the enantiomers was achieved by liquid chromatography on triacctylcellulose, enantiomeric purities of(+)-1 and (+ )-2 being measured by ¹H-NMR in the presence of an optically active auxiliary. Barriers to partial rotation about the C-N bond in 1-4 were determined and compared with corresponding biphenyls.     

Surface characterization of macroporous glycidyl methacrylate based copolymers by inverse gas chromatography

Two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), PGME, with different porosity parameters were synthesized by suspension copolymerization and modified by ring-opening reaction of the pendant epoxy groups with ethylene diamine, EDA. Inverse gas chromatography at infinite dilution was used for the determination of adsorption properties of PGME, and copolymer modified with ethylene diamine, PGME-en. Thermodynamic parameters of adsorption, dispersive components of the surface free energies, and the acid/base constants for the copolymer samples were calculated. The calculated dispersive surface energy values, , for PGME and PGME-en are comparable with the literature data for nonconductive polymers.     

Some investigations on the photostabilization of polypropylene

The effect of substituted hydroxybenzophenone, benzotriazole and organic metal complexes on the photooxidation of PP films has been studied. It has been established that NiDBTC added in 1.0 wt. % is the most effective photostabilizer.While in the case of other stabilizers there is a slight increase in the Co content even during the induction period, with the application of NiDBTC practically no oxidation can be observed before the stabilizer completely disappears. This means that NiDBTC inhibits the photooxidation of the polymer even in low concentration.

---

, - . , Ni, 1,0 . %. . , Ni , . , Ni .

     

Analytical procedures for quantification of peptides in pharmaceutical research by liquid chromatography–mass spectrometry

Peptide quantification by liquid chromatography–mass spectrometry (LC–MS) combines the high resolving power of reversed-phase (RP) chromatography with the excellent selectivity and sensitivity of mass spectrometric detection. On the basis of comprehensive practical experience in the analysis of small molecules, pharmaceutical research is developing technologies for analysis of a growing number of peptidic drug candidates. This article is a detailed review of procedures based on LC–MS techniques for quantitative determination of peptides. With the focus on pharmaceutical applications several technologies for sample preparation, various aspects of peptide chromatography, important characteristics of ESI–MS, selectivity of MS-detection modes, the large variability of internal standards, and modern instrumentation are discussed. The demand for reliable, robust, sensitive, and accurate methods is discussed using numerous examples from the literature, complemented by experiments and results from our laboratory.     

Global Forcing Number of Benzenoid Graphs

A global forcing set in a simple connected graph G with a perfect matching is any subset S of E(G) such that the restriction of the characteristic function of perfect matchings of G on S is an injection. The number of edges in a global forcing set of the smallest cardinality is called the global forcing number of G. In this paper we prove several results concerning global forcing sets and numbers of benzenoid graphs. In particular, we prove that all catacondensed benzenoids and catafused coronoids with n hexagons have the global forcing number equal to n, and that for pericondensed benzenoids the global forcing number is always strictly smaller than the number of hexagons.