Carboxyboronate: A Versatile C1 Building Block

The synthesis and applications of carboxy‐MIDA‐boronate, a novel C1 building block, are described. This molecule is accessible via a ruthenium tetraoxide‐mediated cleavage of commercially available ethynyl‐MIDA‐boronate. In the course of this study, carboxy‐MIDA‐boronate was found to possess ambident reactivity towards nucleophiles. Carboxylic acid derivatization produces a broad range of previously unknown carbamoyl‐, oxycarbo‐ and thiocarboboronates. Carboxy‐MIDA‐boronate and its derivatives undergo condensations to access borylated heterocycles with boron at positions that are difficult to access using alternate methods. The resulting heterocycles participate in the Suzuki–Miyaura cross‐coupling reaction, enabling entry into diverse bis(heteroaryl) motifs. The carbon monoxide‐releasing capacity of carboxy‐MIDA‐boronate was also examined and applied in palladium‐catalyzed carbonylation.     

Individual‐Molecule Perspective Analysis of Chemical Reaction Networks: The Case of a Light‐Driven Supramolecular Pump

The first study in which stochastic simulations of a two‐component molecular machine are performed in the mass‐action regime is presented. This system is an autonomous molecular pump consisting of a photoactive axle that creates a directed flow of rings through it by exploiting light energy away from equilibrium. The investigation demonstrates that the pump can operate in two regimes, both experimentally accessible, in which light‐driven steps can be rate‐determining or not. The number of photons exploited by an individual molecular pump, as well as the precision of cycling and the overall efficiency, critically rely on the operating regime of the machine. This approach provides useful information not only to guide the chemical design of a self‐assembling molecular device with desired features, but also to elucidate the effect of the environment on its performance, thus facilitating its experimental investigation.     

Electroanalytical Determination of Cd(II) and Pb(II) in Bivalve Mollusks using Electrochemically Reduced Graphene Oxide‐based Electrode

An electrochemical sensor for the simultaneous determination of Cd(II) and Pb(II) by square wave anodic stripping voltammetry (SWASV) in bivalve mollusks using a glassy carbon electrode modified with electrochemically reduced graphene oxide has been developed. The modified surface was characterized by cyclic voltammetry, high resolution scanning electron microscopy (HR‐SEM), and Raman spectroscopy. The optimum conditions were optimized and a linear range was observed from 15–105 μg L^?1 with a limits of detection of 15 μg L^?1 for Cd(II) and Pb(II). The methodology was validated and applied in different samples of commercial bivalve mollusks with satisfactory results. The high conductivity and greater surface area of the modifying agent improves the preconcentration capacity of the electrochemical sensor, allowing to develop a simple, rapid and sensitive analysis in the detection of lead and cadmium in marine resources.     

Development of new high‐performance visible light photoinitiators based on carbazole scaffold and their applications in 3d printing and photocomposite synthesis

In this article, new compounds based on the carbazole scaffold (DMs = DM1 and DM2, constituted by a carbazole unit connected on positions 3 and 6 to a two 4,4′‐dimethoxydiphenylamine groups and differing by the substituent present on the nitrogen heteroatom of the carbazole core) were synthesized and proposed as high‐performance visible light photoinitiators/photosensitizers for both the free‐radical polymerization of methacrylates and the cationic polymerization of epoxides upon visible light exposure using LED@405 nm. Remarkably, DM2 leads to higher final conversions than DM1. In order to study the photophysical and photochemical properties of the carbazole derivatives, different parameters were taken into account such as the light absorption, the steady‐state photolysis, and the fluorescence spectroscopy. Using different techniques such as fluorescence quenching, redox behavior, and cyclic voltammetry, we are able to discuss the photosensitization/photoinitiation reactions providing a full coherent picture of the involved chemical mechanisms. The photosensitization of the carbazole derivatives occurred predominantly via singlet excited states at the rate of the diffusion limit. Upon exposure to laser diode at 405 nm, DMs show high performance in initiating systems for 3D resins. Remarkably, DM2 can also be used in photocomposite synthesis using light‐emitting diode conveyor. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2081–2092     

Long‐Term Photostability in Terephthalate Metal–Organic Frameworks

Prolonged (weeks) UV/Vis irradiation under Ar of UiO‐66(Zr), UiO66 Zr‐NO₂, MIL101 Fe, MIL125 Ti‐NH₂, MIL101 Cr and MIL101 Cr(Pt) shows that these MOFs undergo photodecarboxylation of benzenedicarboxylate (BDC) linker in a significant percentage depending on the structure and composition of the material. Routine characterization techniques such as XRD, UV/Vis spectroscopy and TGA fail to detect changes in the material, although porosity and surface area change upon irradiation of powders. In contrast to BCD‐containing MOFs, zeolitic imidazolate ZIF‐8 does not evolve CO₂ or any other gas upon irradiation.     

Towards an understanding of the heat capacity of liquids. A simple two-state model for molecular association

A model for the temperature dependence of the isobaric heat capacity of associated pure liquids C(p,m)(o)(T) is proposed. Taking the ideal gas as a reference state, the residual heat capacity is divided into nonspecific C(p) (res,ns) and associational C(p) (res,ass) contributions. Statistical mechanics is used to obtain C(p)(res,ass) by means of a two-state model. All the experimentally observed C(p,m)(o)(T) types of curves in the literature are qualitatively described from the combination of the ideal gas heat capacity C(p)(id)(T) and C(p)(res,ass)(T). The existence of C(p,m)(o)(T) curves with a maximum is predicted and experimentally observed, for the first time, through the measurement of C(p,m)(o)(T) for highly sterically hindered alcohols. A detailed quantitative analysis of C(p,m)(o)(T) for several series of substances (n-alkanes, linear and branched alcohols, and thiols) is made. All the basic features of C(p,m)(o)(T) at atmospheric and high pressures are successfully described, the model parameters being physically meaningful. In particular, the molecular association energies and the C(p)(res,ns) values from the proposed model are found to be in agreement with those obtained through quantum mechanical ab initio calculations and the Flory model, respectively. It is concluded that C(p,m)(o)(T) is governed by the association energy between molecules, their self-association capability and molecular size.     

Electrocatalysis of As(III) oxidation by cobalt oxide nanoparticles: measurement and modeling the effect of nanoparticle amount on As(III) oxidation potential

Journal of Solid State Electrochemistry - The performance of electrodes modified with electrochemically generated cobalt oxide nanoparticles for the oxidation of As(III) species was investigated by...     

Impregnated ruthenium on magnetite as a recyclable catalyst for the N-alkylation of amines, sulfonamides, sulfinamides, and nitroarenes using alcohols as electrophiles by a hydrogen autotransfer process

Various impregnated metallic salts on magnetite have been prepared, including cobalt, nickel, copper, ruthenium, and palladium salts, as well as a bimetallic palladium-copper derivative. Impregnated ruthenium catalyst is a versatile, inexpensive, and simple system for the selective N-monoalkylation of amino derivatives with poor nucleophilic character, such as aromatic and heteroaromatic amines, sulfonamides, sulfinamides, and nitroarenes, using in all cases alcohols as the initial source of the electrophile, through a hydrogen autotransfer process. In the case of sulfinamides, this is the first time that these amino compounds have been alkylated following this strategy, allowing the use of chiral sulfinamides and secondary alcohols to give the alkylated compound with a diastereomeric ratio of 92:8. In these cases, after alkylation, a simple acid deprotection gave the expected primary amines in good yields. The ruthenium catalyst is quite sensitive, and small modifications of the reaction medium can change the final product. The alkylation of amines using potassium hydroxide renders the N-monoalkylated amines, and the same protocol using sodium hydroxide yields the related imines. The catalyst can be easily removed by a simple magnet and can be reused up to ten times, showing the same activity.     

Dual labeling of biomolecules using MeCAT and DOTA derivatives: application to quantitative proteomics

In this study, single and dual labeling of primary amino and thiol groups of target peptides is presented as a proof of concept. The proposed method allows flexible, independent and sequential labeling of the mentioned residues using lanthanides introduced via DOTA-complexes (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid). The efficiency of the method was optimized using cysteine-containing standard peptides and then applied to bovine serum albumin (BSA) and human serum albumin (HSA) to demonstrate qualitative and quantitative aspects of this strategy. For amino labeling, cysteinyl peptides were immobilized on Sepharose-6B resin and labeled with DOTA-NHS ester followed by metallation with lanthanides. Thiol labeling was carried out using lanthanide-containing metal-coded affinity tags (MeCAT) after elution of peptides from the resin. Complete dual labeling of the standard peptides was demonstrated by liquid chromatography electrospray ionization mass spectrometry, whereas more than 80% of the detected peptides of BSA and HSA were completely dual-labeled. Parallel detection by LC coupled to inductively coupled plasma mass spectrometry (ICP-MS) delivered reliable quantitative information. Thus, the versatile lanthanide choice in both labeling steps allowed estimating primary amino and thiol stoichiometries for the studied samples using different lanthanides. On the other hand, enhancement of ICP-MS signal was achieved as expected when all positions were labeled with the same lanthanide. Finally, linear calibrations of the signal for most of the labeled peptides by standard additions of digested BSA showed a suitable behaviour for quantitative applications and demonstrated the pre-concentration capability of the employed resin.