Photoelastic determination of stresses in multiple-pin connectors

The design, fabrication, and testing of photoelastic models of double-lap, multiple-pin connectors are discussed. Interest is in the stresses in the inner laps. These stresses are determined by constructing models with photoelastic inner laps and transparent-acrylic outer laps. The connectors have two pins, in tandem, parallel to the load direction. A photoelastic-isotropic point is shown to permit the evaluation of load sharing between the two pins. A numerical scheme, utilizing the isochromatic- and isoclinic-photoelastic data and a finite-difference representation of the planestress equilibrium equations, is used to compute the stresses around the two pins. Representative stress distributions and stress-concentration factors are shown.     

Konyanin: a new lignan from hapuophyllum vulcaniclm

Konyanin ($\text{1}$), obtained from $\text{Haplophyllum vulcanicum}$ (Rutaceae), is the first known 1,4-dihydroarylnaphthalene lignan in which the lactone carbonyl is bonded to C-3 rather than to C-2. Detailed NMR spectral data have been complied for the accompanying lignans (-)-kusunokinin ($\text{5}$) and diphyllin ($\text{7}$).     

On Quantitative Autoradiography of Semiconductor Basic Material

It will be described methods of the quantitative evaluation of elements interesting in semiconductor technology and their distribution in silicon using autoradiographic techniques. The local concentration of the element phosphorus in dependence of their local distribution is determined with silver halide films. As standard samples silicon disks phosphorus diffused are used.

The distribution of the element boron and their local concentration is determined on the way of neutron induced autoradiography (NIAR). In this technique boron implanted or diffused silicon disks are used as standard samples. Different possibilities of the quantitative evaluation of autoradiograms will be considered and compared.     

Polyhalite and its analogous triple salts

Polyhalite (K₂SO₄ · MgSO₄ · 2CaSO₄ · 2H₂O) and analogue triple salts, where Mg²⁺ is substituted by Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺, have been synthesized. The salts were characterized by thermal analysis, Raman spectroscopy and X-ray powder diffraction. Diffraction patterns and Raman spectra resemble those of natural polyhalite, except K₂SO₄ · CuSO₄ · 2CaSO₄ · 2H₂O. The latter corresponds to the mineral leightonite, which is structurally different. For polyhalite analogues the cell parameters of the triclinic unit cell have been determined from the powder diffraction patterns. The length of the unit cell vectors varies regularly with the ionic radius of the substituted ion M ²⁺ and is explained by changes in the extension of the coordination octahedron of M ²⁺. Thereby increasing distances of the coordinated water molecules at M ²⁺ parallel with decreasing dehydration temperatures of the corresponding polyhalite. Correspondence: Daniela Freyer, Institut für Anorganische Chemie, TU Bergakademie Freiberg, 09599 Freiberg, Germany.     

Crystallization and Phase Stability of CaSO<Subscript>4</Subscript> and CaSO<Subscript>4</Subscript> – Based Salts

Summary.  Calcium sulfate occurs in nature in form of three different minerals distinguished by the degree of hydration: gypsum (CaSO₄·2H₂O), hemihydrate (CaSO₄·0.5H₂O) and anhydrite (CaSO₄). On the one hand the conversion of these phases into each other takes place in nature and on the other hand it represents the basis of gypsum-based building materials. The present paper reviews available phase diagram and crystallization kinetics information on the formation of calcium sulfate phases, including CaSO₄-based double salts and solid solutions. Uncertainties in the solubility diagram CaSO₄–H₂O due to slow crystallization kinetics particularly of anhydrite cause uncertainties in the stable branch of crystallization. Despite several attempts to fix the transition temperatures of gypsum–anhydrite and gypsum–hemihydrate by especially designed experiments or thermodynamic data analysis, they still vary within a range from 42–60°C and 80–110°C. Electrolyte solutions decrease the transition temperatures in dependence on water activity. Dry or wet dehydration of gypsum yields hemihydrates (α-, β-) with different thermal and re-hydration behaviour, the reason of which is still unclear. However, crystal morphology has a strong influence. Gypsum forms solid solutions by incorporating the ions HPO₄ ²⁻, HAsO₄ ²⁻, SeO₄ ²⁻, CrO₄ ²⁻, as well as ion combinations Na⁺(H₂PO₄)⁻ and Ln³⁺(PO₄)³⁻. The channel structure of calcium sulfate hemihydrate allows for more flexible ion substitutions. Its ion substituted phases and certain double salts of calcium sulfate seem to play an important role as intermediates in the conversion kinetics of gypsum into anhydrite or other anhydrous double salts in aqueous solutions. The same is true for the opposite process of anhydrite hydration to gypsum. Knowledge about stability ranges (temperature, composition) of double salts with alkaline and alkaline earth sulfates (esp. Na₂SO₄, K₂SO₄, MgSO₄, SrSO₄) under anhydrous and aqueous conditions is still very incomplete, despite some progress made for the systems Na₂SO₄–CaSO₄ and K₂SO₄–CaSO₄–H₂O. Corresponding author. E-mail: daniela.freyer@chemie.tu-freiberg.de Received December 17, 2002; accepted January 10, 2003 Published online April 3, 2003     

Improved methods for 1H-3H heteronuclear shift correlation

A better understanding of the structure of complex 3H-labeled molecules can be obtained by complete assignment of their 1H and 3H solution-state NMR spectra. The assignment process is aided by the detection of heteronuclear chemical shift correlations between 1H and 3H nuclei. Heteronuclear correlation (HETCOR) experiments previously applied to this task exhibit several drawbacks caused by the nature of both the pulse sequences and 1H-3H spin systems. The range of J-couplings involved in 1H-3H coupling networks make it challenging to perform correlation experiments using methods that rely on coherences created during free precession periods and interrupted by transfer pulses. Two alternative HETCOR experiments are demonstrated for 1H-3H systems in the present work and are shown to have advantages over earlier methods. The first experiment is known as hetero-TOCSY and correlates heteronuclear chemical shifts using J-cross polarization. This experiment achieves both homonuclear and heteronuclear mixing and connects the chemical shifts of all 1H and 3H nuclei in a coupling network. A second HETCOR experiment uses the heteronuclear Overhauser effect to obtain through-space correlations between nearby nuclei. The 1H-3H HETCOR experiments are phase sensitive and typically contain more correlations than other methods, which is beneficial for assignment purposes, while being sensitive enough to be applicable to routine analytical samples. The experiments were used to analyze 3H incorporation in sub-milligram quantities of 3H-labeled pharmaceutical derivatives with complex labeling schemes.     

Model simulation of cationic polymerization by an iterative technique

Using a simple, instructive model of living polymerizations, we develop an economic technique for solving a complete set of kinetic equations for active polymers P_n^* with chain length n. The method consists of two steps: (i) solution of the global kinetic equations for the global species P^* which comprises all individual polymers P_n^* together with monomer M and other non-polymeric species, followed by (ii) iterative solution of the original kinetic equations, successively for the individual polymers P₁^*, P₂^*, P₃^*, …, P_n^*. The method is applied successfully to a rather complex, realistic model of cationic polymerizations. In general, our iterative scheme serves to reduce numerical storage requirements, in comparison with traditional direct integrations for all individual kinetic equations. Therefore it may allow simulations of very demanding polymerizations, including very high degrees of polymerization, which cannot be evaluated by traditional techniques.     

The “AURAS” system for computer-aided autoradiogram evaluation

A compound device for autoradiogram evaluation is described which consists of a modified Zeiss rapid photometer and a Densitron system with a scanner for picture digitization and a microcomputer as processing unit. The mode of operation of the compound device is illustrated by some examples.