Alignment of retention time obtained from multicapillary column gas chromatography used for VOC analysis with ion mobility spectrometry

Multicapillary column (MCC) ion mobility spectrometers (IMS) are increasingly in demand for medical diagnosis, biological applications and process control. In a MCC-IMS, volatile compounds are differentiated by specific retention time and ion mobility when rapid preseparation techniques are applied, e.g. for the analysis of complex and humid samples. Therefore, high accuracy in the determination of both parameters is required for reliable identification of the signals. The retention time in the MCC is the subject of the present investigation because, for such columns, small deviations in temperature and flow velocity may cause significant changes in retention time. Therefore, a universal correction procedure would be a helpful tool to increase the accuracy of the data obtained from a gas-chromatographic preseparation. Although the effect of the carrier gas flow velocity and temperature on retention time is not linear, it could be demonstrated that a linear alignment can compensate for the changes in retention time due to common minor deviations of both the carrier gas flow velocity and the column temperature around the MCC-IMS standard operation conditions. Therefore, an effective linear alignment procedure for the correction of those deviations has been developed from the analyses of defined gas mixtures under various experimental conditions. This procedure was then applied to data sets generated from real breath analyses obtained in clinical studies using different instruments at different measuring sites for validation. The variation in the retention time of known signals, especially for compounds with higher retention times, was significantly improved. The alignment of the retention time—an indispensable procedure to achieve a more precise identification of analytes—using the proposed method reduces the random error caused by small accidental deviations in column temperature and flow velocity significantly.     

GC/MS detection of central nervous tissue as specified BSE risk material in meat products and meat and bone meals: thermal stability of markers in comparison with immunochemistry and RT-PCR

Methods for the detection of central nervous tissue (CNT) are urgently needed in food control as a means for controlling strict adherence to both food labeling and banning of specified BSE risk material. Here, we report data on heat stability of the CNT markers neuron-specific enolase (NSE) in western blotting, glial fibrillary acidic protein (GFAP) in an enzyme linked immunoassay, mRNA_GFAP in a real-time PCR assay, and several fatty acids (C22:6, C24:0-OH, C24:1ω9/ω7, C24:1ω9-OH/ω7-OH, and C24:0) in gas chromatography mass spectrometry (GC/MS). The sample matrix, a standard material of emulsion-type sausage with varied contents of CNT (brain), was heat-treated in three studies: (1) routine meat technological heat treatment with low (85 °C, 30 min), medium (115 °C, 30 min), and high (133 °C, 30 min, 3 bar) heating of 72 anonymous samples from a blind trial; (2) heat treatment under experimental conditions (100, 110, …, 200 °C, 45 min); and (3) fractionized heating of central nervous system (up to three times) under moderate routine technological conditions (85, 100, and 115 °C, 30 min). The markers of the immunochemical methods showed a low GFAP or very low NSE temperature stability at medium and high temperature conditions. The real-time PCR assay gave inconsistent, non-quantitative results, which indicated an uncontrollable matrix effect. The relevant GC/MS markers (C24:0-OH, C24:1ω9/ω7, and C24:1ω9-OH/ω7-OH) proved to be extremely stable. Neither meat and bone meal conditions (133 °C) nor experimental heating (up to and above 140 °C) showed any reduction of GC/MS CNT quantification. On the contrary, a slight but significant increase was noted over a certain temperature range (120–140 °C) for most fatty acids, possibly due to an improved extractability of the fatty acids. We conclude that a quantitative approach is highly unreliable when using immunochemical methods; moreover, these methods might be basically prone to false-negative results depending on heat treatment and matrix composition. Therefore, antibodies with higher affinity to heat-treated CNT marker epitopes are needed. Relevant amounts of CNT (≥0.5%) in low- and medium-heated products would still be reliably detectable by the GFAP ELISA, which justifies its use as a screening method in official food control. The results obtained by the real-time PCR assay were contradictory to recently published data, indicating a need for further protocol optimization and collaborative trials. Up to date, the analytical approach using GC/MS is the only valid procedure as pertaining to heat stability and quantitative analysis; consequently, it should be recommended as the reference procedure in official food control for CNT detection in heat-treated meat products.     

Interpreting the difference between conventional and bi-directional plate-height measurements in liquid chromatography

An experimental and theoretical study was conducted of the column characterization technique in which plate heights determined using the conventional pulse-response method are compared with those determined using a bi-directional method where an eluite sample is introduced into one end of a chromatographic column and elution occurs at the same end after the flow direction is reversed inside the column. Experiments are presented for a micropellicular HPLC column before and after its performance has been degraded by repeated sample injections, for a low-pressure column containing nonporous glass particles, and for an HPLC column containing particles with 300 Å pores. The results obtained are interpreted in terms of several different theories which apply in various Fourier number ranges. It was shown that the transcolumn contribution to convective dispersion in a chromatographic column is largely responsible for the difference observed between conventional and bi-directional plate-height measurements and that a collocation method can be employed to develop a useful analytical expression for this contribution.     

Enantioselective capillary electrophoresis for identification and characterization of human cytochrome P450 enzymes which metabolize ketamine and norketamine in vitro

Ketamine, a phencyclidine derivative, is used for induction of anesthesia, as an anesthetic drug for short term surgical interventions and in subanesthetic doses for postoperative pain relief. Ketamine undergoes extensive hepatic first-pass metabolism. Enantioselective capillary electrophoresis with multiple isomer sulfated β-cyclodextrin as chiral selector was used to identify cytochrome P450 enzymes involved in hepatic ketamine and norketamine biotransformation in vitro. The N-demethylation of ketamine to norketamine and subsequently the biotransformation of norketamine to other metabolites were studied via analysis of alkaline extracts of in vitro incubations of racemic ketamine and racemic norketamine with nine recombinantly expressed human cytochrome P450 enzymes and human liver microsomes. Norketamine was formed by CYP3A4, CYP2C19, CYP2B6, CYP2A6, CYP2D6 and CYP2C9, whereas CYP2B6 and CYP2A6 were identified to be the only enzymes which enable the hydroxylation of norketamine. The latter two enzymes produced metabolic patterns similar to those found in incubations with human liver microsomes. The kinetic data of ketamine N-demethylation with CYP3A4 and CYP2B6 were best described with the Michaelis–Menten model and the Hill equation, respectively. This is the first study elucidating the individual enzymes responsible for hydroxylation of norketamine. The obtained data suggest that in vitro biotransformation of ketamine and norketamine is stereoselective.     

Novel fluoro-substituted benzo- and benzothieno fused pyrano[2,3-c]pyrazol-4(1H)-ones

A straightforward, two-step synthesis of fluoro substituted chromeno[2,3-c]pyrazol- and [1]benzothieno[2′,3′:5,6]pyrano[2,3-c]pyrazol-4(1H)-ones, respectively, is presented. Hence, treatment of 1-substituted or 1,3-disubstituted 2-pyrazolin-5-ones with fluoro substituted 2-fluorobenzoyl chlorides or 3-chloro-6-fluoro-1-benzothiophene-2-carbonyl chloride using calcium hydroxide in refluxing 1,4-dioxane gave the corresponding 4-aroylpyrazol-5-ols, which were cyclized into the fused ring systems. 5-Fluorochromeno[2,3-c]pyrazol-4(1H)-one was obtained upon treatment of the 1-(4-methoxybenzyl) protected congener with trifluoroacetic acid. Treatment of 5-fluorochromeno[2,3-c]pyrazol-4(1H)-ones with methylhydrazine afforded novel tetracyclic ring systems such as 2-methyl-7-phenyl-2,7-dihydropyrazolo[4′,3′:5,6]pyrano[4,3,2-cd]indazole. Detailed NMR spectroscopic investigations (¹H, ¹³C, ¹⁵N, ¹⁹F) with the obtained compounds were undertaken.     

Influence of Process Parameters on the Reaction Kinetics of the Chromium‐Catalyzed Trimerization of Ethylene

In this paper we report the results of an extensive experimental kinetic study carried out on the novel ethylene trimerization catalyst system, comprising the chromium source [CrCl₃(thf)₃] (thf=tetrahydrofuran), a Ph₂P‐N(iPr)‐P(Ph)‐N(iPr)H (PNPNH) ligand (Ph=phenyl, iPr=isopropyl), and triethylaluminum (AlEt₃) as activator. It could be shown that the initial activity shows a first‐order dependency on the ethylene concentration. Also, a first‐order dependency was found for the catalyst concentration. The initial activity follows a typical Arrhenius behavior with an experimentally determined activation energy of 52.6 kJ mol^?1. At elevated temperatures (ca. 80 °C), a significant deactivation was observed, which can be tentatively traced back to a ligand rearrangement in the presence of AlEt₃. After a fast initial phase, a pronounced ‘kink’ in the ethylene‐uptake curve is observed, followed by a slow, almost linear, further increase of the total ethylene consumption. The catalyst composition, in particular the ligand/chromium and the cocatalyst/chromium molar ratio, has a strong impact on the catalytic performance of the trimerization of ethylene.     

VIM3 Corrigendum available online

News and Announcements

VIM3 Corrigendum available online     

A nonlinear PDE model for reconstructing a regular surface from sampled data using a level set formulation on triangular meshes

In this paper, we propose a nonlinear PDE model for reconstructing a regular surface from sampled data. At first, we show the existence and the uniqueness of a viscosity solution to this problem. Then we propose a numerical scheme for solving the nonlinear level set equation on unstructured triangulations adapted to the data sample. We show the consistency of this scheme. In addition, we show how to compute nodewise first and second order derivatives. Some application examples of curve or surface construction are provided to illustrate the potential and to demonstrate the accuracy of this method.     

Speckle imaging of spin fluctuations in a strongly interacting Fermi gas

Spin fluctuations and density fluctuations are studied for a two-component gas of strongly interacting fermions along the Bose-Einstein condensate-BCS crossover. This is done by in?situ imaging of dispersive speckle patterns. Compressibility and magnetic susceptibility are determined from the measured fluctuations. This new sensitive method easily resolves a tenfold suppression of spin fluctuations below shot noise due to pairing, and can be applied to novel magnetic phases in optical lattices.     

Extended magnetic reconnection across the dayside magnetopause

The extent of where magnetic reconnection (MR), the dominant process responsible for energy and plasma transport into the magnetosphere, operates across Earth's dayside magnetopause has previously been only indirectly shown by observations. We report the first direct evidence of X-line structure resulting from the operation of MR at each of two widely separated locations along the tilted, subsolar line of maximum current on Earth's magnetopause, confirming the operation of MR at two or more sites across the extended region where MR is expected to occur. The evidence results from in-situ observations of the associated ion and electron plasma distributions, present within each magnetic X-line structure, taken by two spacecraft passing through the active MR regions simultaneously.