Acid‐Labile Amphiphilic PEO‐b‐PPO‐b‐PEO Copolymers: Degradable Poloxamer Analogs

Poly ((ethylene oxide)‐b‐(propylene oxide)‐b‐(ethylene oxide)) triblock copolymers commonly known as poloxamers or Pluronics constitute an important class of nonionic, biocompatible surfactants. Here, a method is reported to incorporate two acid‐labile acetal moieties in the backbone of poloxamers to generate acid‐cleavable nonionic surfactants. Poly(propylene oxide) is functionalized by means of an acetate‐protected vinyl ether to introduce acetal units. Three cleavable PEO‐PPO‐PEO triblock copolymers (M_n,total = 6600, 8000, 9150 g·mol⁻¹; M_n,PEO = 2200, 3600, 4750 g·mol⁻¹) have been synthesized using anionic ring‐opening polymerization. The amphiphilic copolymers exhibit narrow molecular weight distributions (Ð = 1.06–1.08). Surface tension measurements reveal surface‐active behavior in aqueous solution comparable to established noncleavable poloxamers. Complete hydrolysis of the labile junctions after acidic treatment is verified by size exclusion chromatography. The block copolymers have been employed as surfactants in a miniemulsion polymerization to generate polystyrene (PS) nanoparticles with mean diameters of ≈200 nm and narrow size distribution, as determined by dynamic light scattering and scanning electron microscopy. Acid‐triggered precipitation facilitates removal of surfactant fragments from the nanoparticles, which simplifies purification and enables nanoparticle precipitation “on demand.”

     

Studies of Mental “Noise”

Successive tests of subjects' performance in reaction time tasks were treated as time series and submitted to spectrum analysis. Rather than revealing the white noise expected by the view that variability is due to random error (equivalent power across frequency), the power spectra revealed colored noise. The slopes of the power spectra did not vary much for tasks differing in memory requirements. Spectrum analysis of time series from the logistic map also showed colored noise in regions on the edge of chaos, showing that the presence of colored noise in cognitive data need not oblige a theoretical account based on a complex, high-dimensional, system.     

A stripe-to-droplet transition driven by conformational transitions in a binary lipid-lipopolymer mixture at the air-water interface

We report the observation of an unusual stripe-droplet transition in precompressed Langmuir monolayers consisting of mixtures of poly(ethylene) glycol (PEG) amphiphiles and phospholipids. This highly reproducible and fully reversible transition occurs at approximately zero surface pressure during expansion (or compression) of the monolayer following initial compression into a two-dimensional solid phase. It is characterized by spontaneous emergence of an extended, disordered stripe-like morphology from an optically homogeneous phase during gradual expansion. These stripe patterns appear as a transient feature and continuously progress, involving gradual coarsening and ultimate transformation into a droplet morphology upon further expansion. Furthermore, varying relative concentrations of the two amphiphiles and utilizing amphiphiles with considerably longer ethylene glycol headgroups reveal that this pattern evolution occurs in narrow concentration regimes, values of which depend on ethylene oxide headgroup size. These morphological transitions are reminiscent of those seen during a passage through a critical point by variations in thermodynamic parameters (e.g., temperature or pressure) as well as those involving spinodal decomposition. While the precise mechanism cannot be ascertained using present experiments alone, our observations can be reconciled in terms of modulations in competing interactions prompted by the pancake-mushroom-brush conformational transitions of the ethylene glycol headgroup. This in turn suggests that the conformational degree of freedom represents an independent order parameter, or a switch, which can induce large-scale structural reorganization in amphiphilic monolayers. Because molecular conformational changes are pervasive in biological membranes, we speculate that such conformational transition-induced pattern evolution might provide a physical mechanism by which membrane processes are amplified.     

Transition-metal-complexed cyclic [3]- and [4]pseudorotaxanes containing rigid ring-and-filament conjugates: synthesis and solution studies

By using the "gathering-and-threading" effect of copper(I) with rigid ring-and-string conjugates, daisy-chain-type [3]- and [4]pseudorotaxanes could be prepared in high yields. The organic fragment used consisted of a 2,9-diphenyl-1,10-phenanthroline (dpp)-containing ring attached to a coordinating filament capable of threading through the ring of another molecule by coordination to copper(I). The bidentate chelate introduced in the axis was also a 1,10-phenanthroline (phen) derivative with two methyl groups ortho to the nitrogen atoms of the phen unit. The organic component was prepared following a multistep strategy, one of the key steps being the attachment of the ring to the lateral axis. This connection was done by a condensation reaction between an ortho dione located at the back of a ring-incorporated phen and an aromatic aldehyde, which was the end-function of the thread. An oxazole nucleus was obtained after the condensation, which provided a rigid connection between the ring and the axis. In this way, the coordination axes of the ring-incorporated bidentate chelate and of the ligand belonging to the lateral filament were approximately orthogonal to one another. The design was such that the tetrameric complex, a [4]pseudorotaxane, seemed to be the most stable species, owing to the mutual geometrical arrangement of the filament and the ring. Various spectroscopic techniques, such as (1)H NMR spectroscopy, including DOSY, and electrospray ionization mass spectroscopy (ESI-MS), clearly demonstrated that a mixture of cyclic [3]- and [4]pseudorotaxane was obtained; the proportions of both components depended on concentration and temperature. Copper(I) was not the only metal center leading to the formation of cyclic pseudorotaxanes. A similar effect was observed with silver(I) as the templating metal: quantitative formation of threaded species was observed, with a higher proportion of trimer over tetramer than in the copper(I) case. Concentration and temperature effects were investigated for both series of Cu(I) - and Ag(I) -complexed threaded species showing that formation of the trimer was favored upon dilution or heating of the solution.     

Surface-dependent chemical equilibrium constants and capacitances for bare and 3-cyanopropyldimethylchlorosilane coated silica nanochannels

We present a combined theoretical and experimental analysis of the solid-liquid interface of fused-silica nanofabricated channels with and without a hydrophilic 3-cyanopropyldimethylchlorosilane (cyanosilane) coating. We develop a model that relaxes the assumption that the surface parameters C(1), C(2), and pK(+) are constant and independent of surface composition. Our theoretical model consists of three parts: (i) a chemical equilibrium model of the bare or coated wall, (ii) a chemical equilibrium model of the buffered bulk electrolyte, and (iii) a self-consistent Gouy-Chapman-Stern triple-layer model of the electrochemical double layer coupling these two equilibrium models. To validate our model, we used both pH-sensitive dye-based capillary filling experiments as well as electro-osmotic current-monitoring measurements. Using our model we predict the dependence of ζ potential, surface charge density, and capillary filling length ratio on ionic strength for different surface compositions, which can be difficult to achieve otherwise.     

N-H···π hydrogen-bonding and large-amplitude tipping vibrations in jet-cooled pyrrole-benzene

The N-H···π hydrogen bond is an important intermolecular interaction in many biological systems. We have investigated the infrared (IR) and ultraviolet (UV) spectra of the supersonic-jet cooled complex of pyrrole with benzene and benzene-d(6) (Pyr·Bz, Pyr·Bz-d(6)). DFT-D density functional, SCS-MP2 and SCS-CC2 calculations predict a T-shaped and (almost) C(s) symmetric structure with an N-H···π hydrogen bond to the benzene ring. The pyrrole is tipped by ω(S(0)) = ±13° relative to the surface normal of Bz. The N···ring distance is 3.13 ?. In the S(1) excited state, SCS-CC2 calculations predict an increased tipping angle ω(S(1)) = ±21°. The IR depletion spectra support the T-shaped geometry: The NH stretch is redshifted by -59 cm(-1), relative to the "free" NH stretch of pyrrole at 3531 cm(-1), indicating a moderately strong N-H···π interaction. The interaction is weaker than in the (Pyr)(2) dimer, where the NH donor shift is -87 cm(-1) [Dauster et al., Phys. Chem. Chem. Phys., 2008, 10, 2827]. The IR C-H stretch frequencies and intensities of the Bz subunit are very similar to those of the acceptor in the (Bz)(2) dimer, confirming that Bz acts as the acceptor. While the S(1)←S(0) electronic origin of Bz is forbidden and is not observable in the gas-phase, the UV spectrum of Pyr·Bz in the same region exhibits a weak 0 band that is red-shifted by 58 cm(-1) relative to that of Bz (38?086 cm(-1)). The origin appears due to symmetry-breaking of the π-electron system of Bz by the asymmetric pyrrole NH···π hydrogen bond. This contrasts with (Bz)(2), which does not exhibit a 0 band. The Bz moiety in Pyr·Bz exhibits a 6a band at 0 + 518 cm(-1) that is about 20× more intense than the origin band. The symmetry breaking by the NH···π hydrogen bond splits the degeneracy of the ν(6)(e(2g)) vibration, giving rise to 6a' and 6b' sub-bands that are spaced by ～6 cm(-1). Both the 0 and 6 bands of Pyr·Bz carry a progression in the low-frequency (10 cm(-1)) excited-state tipping vibration ω', in agreement with the change of the ω tipping angle predicted by SCS-MP2 and SCS-CC2 calculations.     

Crown ethers at the aqueous solution-air interface. Part 2. Electrolyte effects, ethylene oxide hydration and temperature behaviour

Vibrational Sum Frequency Spectroscopy (VSFS) was employed to study adsorbing films of 4-Nitro Benzo-15-Crown-5 (NB15C5) and Benzo-15-Crown-5 (B15C5) at the aqueous solution-air interface. The surface of the solution is strongly influenced by the presence of crown ether species. Changes in the orientation of NB15C5 were monitored as a function of solution concentration, by targeting the ratio of peak intensities of the CN and NO(2) vibrational modes. The water of hydration has also been probed as a function of crown concentration, salt concentration, and temperature. The latter study strongly suggests that the surface can be treated as a charged interface, and that the associated ordered water decreases with increasing ionic strength of the bulk solution.