Solid-State CP/MAS 13C-NMR Spectra of Oligolides derived from 3-hydroxybutanoic acid

The solid-state CP/MAS ¹³C-NMR spectra (cross-polarization/magic-angle spinning ¹³C-NMR) of eight lower cyclic and one linear oligomers and several polymers of (R)-3-hydroxybutanoic acid (3-HB) are reported. The polymeric samples of different origin and molecular weight give remarkably similar and well resolved spectra, indicating considerable similarity in the conformations of the molecules and homegeneity in the solid-state environment. The crystalline cyclic oligomers 1 – 8 containing 3–9 units of 3-HB give very well resolved spectra. The number of nonequivalent positions in the solid state can be identified and is in accord with structures from X-ray diffraction where these were determined. The spectra of the oligolides become increasingly similar to those of the polymer as the ring size increases. This spectral evidence supports the view of a homogeneous and well defined conformation for the polymeric material (as proposed previously, based on other experiments).     

Cyclische Oligomere von (R)-3-Hydroxybuttersäure: Herstellung und strukturelle Aspekte

Cyclic Oligomers of (R)-3-Hydroxybutanoic Acid: Preparation and Structural Aspects The oligolides containing three to ten (R)-3-hydroxybutanoate (3-HB) units (12-through 40-membered rings 1–8 ) are prepared from the hydroxy acid itself, its methyl ester, its lactone (‘monolide’), or its polymer (poly(3-HB), mol. wt. ca. 10⁶ Dalton) under three sets of conditions: (i) treatment of 3-HB ( 10 ) with 2,6-dichlorobenzoyl chloride/pyridine and macrolactonization under high dilution in toluene with 4-(dimethylamino)pyridine (Fig. 3); (ii) heating a solution (benzene, xylene) of the β-lactone 12 or of the methyl ester 13 from 3-HB with the tetraoxadistanna compound 11 as trans-esterification catalyst (Fig. 4); (iii) heating a mixture of poly(3-HB) and toluene-sulfonic acid in toluene/1,2-dichloroethane for prolonged periods of time at ca. 100° (Fig. 6). In all three cases, mixtures of oligolides are formed with the triolide 1 being the prevailing component (up to 50% yield) at higher temperatures and with longer reaction times (thermodynamic control, Figs. 3–6). Starting from rac-β-lactone rac- 12 , a separable 3:1 to 3:2 mixture of the l,u- and the l,l-triolide diasteroisomers rac- 14 and rac- 1 , respectively, is obtained. An alternative method for the synthesis of the octolide 6 is also described: starting from the appropriate esters 15 and 17 and the benzyl ether 16 of 3-HB, linear dimer, tetramer, and octamer derivatives 18–23 are prepared, and the octamer 23 with free OH and CO₂H group is cyclized (→ 6 ) under typical macrolactonization conditions (see Scheme). This ‘exponential fragment coupling protocol’ can be used to make higher linear oligomers as well. The oligolides 1–8 are isolated in pure form by vacuum distillation, chromatography, and crystallization, an important analytical tool for determining the composition of mixtures being ¹³C-NMR spectroscopy (each oligolide has a unique and characteristic chemical shift of the carbonyl C-atom, with the triolide 1 at lowest, the decolide 8 at highest field). The previously published X-ray crystal structures of triolide 1 , pentolide 3 , and hexolide 4 (two forms), as well as those of the l,u-triolide rac- 14 , of tetrolide ent- 2 , of heptolide 5 , and of two modifications of octolide 6 described herein for the first time are compared with each other (Figs. 7–10 and 12–15, Tables 2 and 5–7) and with recently modelled structures (Tables 3 and 4, Fig. 11). The preferred dihedral angles τ₁ to τ₄ found along the backbone of the nine oligolide structures (the hexamer and the larger ones all have folded rings!) are mapped and statistically evaluated (Fig. 16, Tables 5–7). Due to the occurrence of two conformational minima of the dihedral angle O? CO? CH₂? CH (τ₃ = + 151 or ?43°), it is possible to locate two types of building blocks for helices in the structures at hand: a right-handed 3₁ and a left-handed 2₁ helix; both have a ca. 6 Å pitch, but very different shapes and dispositions of the carbonyl groups (Fig. 17). The 2₁ helix thus constructed from the oligolide single-crystal data is essentially superimposable with the helix derived for the crystalline domains of poly(3-HB) from stretched-fiber X-ray diffraction studies. The absence of the unfavorable (E)-type arrangements around the OC? OR bond (‘cis-ester’) from all the structures of (3-HB) oligomers known so far suggests that the model proposed for a poly(3-HB)-containing ion channel (Fig. 2) must be modified.     

Maleimide Glycidyl Ether: A Bifunctional Monomer for Orthogonal Cationic and Radical Polymerizations

A novel bifunctional monomer, namely maleimide glycidyl ether (MalGE), prepared in a four‐step reaction sequence is introduced. This monomer allows for selective (co)polymerization of the epoxide group via cationic ring‐opening polymerization, preserving the maleimide functionality. On the other hand, the maleimide functionality can be copolymerized via radical techniques, preserving the epoxide moiety. Cationic ring‐opening multibranching copolymerization of MalGE with glycidol was performed, and a MalGE content of up to 24 mol% could be incorporated into the hyperbranched polymer backbone (M_n = 1000–3000 g mol⁻¹). Preservation of the maleimide functionality during cationic copolymerization was verified via NMR spectroscopy. Subsequently, the maleimide moiety was radically crosslinked to generate hydrogels and additionally employed to perform Diels‐Alder (DA) “click” reactions with (functional) dienes after the polymerization process. Radical copolymerization of MalGE with styrene (M_n = 5000–9000 g mol⁻¹) enabled the synthesis of a styrene copolymer with epoxide functionalities that are useful for versatile crosslinking and grafting reactions.

     

The cell-penetrating peptide TAT(48-60) induces a non-lamellar phase in DMPC membranes.

Cell-penetrating peptides (CPPs) are short polycationic sequences that can translocate into cells without disintegrating the plasma membrane. CPPs are useful tools for delivering cargo, but their molecular mechanism of crossing the lipid bilayer remains unclear. Here we study the interaction of the HIV-derived CPP TAT (48-60) with model membranes by solid-state NMR spectroscopy and electron microscopy. The peptide induces a pronounced isotropic (31)P NMR signal in zwitterionic DMPC, but not in anionic DMPG bilayers. Octaarginine and to a lesser extent octalysine have the same effect, in contrast to other cationic amphiphilic membrane-active peptides. The observed non-lamellar lipid morphology is attributed to specific interactions of polycationic peptides with phosphocholine head groups, rather than to electrostatic interactions. Freeze-fracture electron microscopy indicates that TAT(48-60) induces the formation of rodlike, presumably inverted micelles in DMPC, which may represent intermediates during the translocation across eukaryotic membranes.     

Inhibition of energy transfer between conjugated polymer chains in host/guest nanocomposites generates white photo- and electroluminescence

The generation of white light requires the combination of two or more chromophores that emit simultaneously. The observed color of a mixture of light-emitting molecules, however, originates generally only from the lowest band-gap species because of efficient energy transfer between the chromophores which is difficult to avoid. Here we report on a nanocomposite material designed to yield pure and stable white photo- and electroluminescence. In this material, red, green, and blue emitting conjugated polymers are confined within the galleries of a layered semiconducting host matrix. The host hinders polymer pi-pi interactions which are responsible for the energy transfer between polymer chains, consequently, emission from the three chromophores is observed simultaneously resulting in white photoluminescence. The efficacy of the nanocomposites is demonstrated in simple single-layer white-emitting polymer diodes. The mechanism suggested here for white light generation, supported by extensive luminescence measurements, is in contrast to that previously reported in white-emitting polymer diodes where efficient energy transfer between polymer chains was essential for obtaining white light.     

Asymmetric Cascade Reaction to Allylic Sulfonamides from Allylic Alcohols by Palladium(II)/Base‐Catalyzed Rearrangement of Allylic Carbamates

A regio‐ and enantioselective tandem reaction is reported capable of directly transforming readily accessible achiral allylic alcohols into chiral sulfonyl‐protected allylic amines. The reaction is catalyzed by the cooperative action of a chiral ferrocene palladacycle and a tertiary amine base and combines high step‐economy with operational simplicity (e.g. no need for inert‐gas atmosphere or catalyst activation). Mechanistic studies support a Pd^II‐catalyzed [3,3] rearrangement of allylic carbamates—generated in situ from the allylic alcohol and an isocyanate—as the key step, which is followed by a decarboxylation.     

N‐Heterocyclic Carbene,High Oxidation State Molybdenum Alkylidene Complexes: Functional‐Group‐Tolerant Cationic Metathesis Catalysts

We synthesized the first N‐heterocyclic carbene (NHC) complexes of Schrock’s molybdenum imido alkylidene bis(triflate) complexes. Unlike existing bis(triflate) complexes, the novel 16‐electron complexes represent metathesis active, functional‐group‐tolerant catalysts. Single‐crystal X‐ray structures of two representatives of this novel class of Schrock catalysts are presented and reactivity is discussed in view of their structural peculiarities. In the presence of monomer (substrate), these catalysts form cationic species and can be employed in ring‐closing metathesis (RCM), ring‐opening metathesis polymerization (ROMP), as well as in the cyclopolymerization of α,ω‐diynes. Monomers containing functional groups, which are not tolerated by the existing variations of Schrock’s catalyst, e.g., sec‐amine, hydroxy, and carboxylic acid moieties, can be used. These catalysts therefore hold great promise in both organic and polymer chemistry, where they allow for the use of protic monomers.     

Concise Synthesis of [1,1′‐Biisoquinoline]‐4,4′‐diol via a Protecting Group Strategy and Its Application for Potential Liquid‐Crystalline Compounds

The [1,1′‐biisoquinoline]‐4,4′‐diol ( 4a ), which was obtained as hydrochloride 4a ?2 HCl in two steps starting from the methoxymethyl (MOM)‐protected 1‐chloroisoquinoline 8 (Scheme 3), opens access to further O‐functionalized biisoquinoline derivatives. Compound 4a ?2 HCl was esterified with 4‐(hexadecyloxy)benzoyl chloride ( 5b ) to give the corresponding diester 3b (Scheme 4), which could not be obtained by Ni‐mediated homocoupling of 6b (Scheme 2). The ether derivative 2b was accessible in good yield by reaction of 4a ?2 HCl with the respective alkyl bromide 9 under the conditions of Williamson etherification (Scheme 4). Slightly modified conditions were applied to the esterification of 4a ?2 HCl with galloyl chlorides 10a – h as well as etherification of 4a ?2 HCl with 6‐bromohexyl tris(alkyloxy)benzoates 11b , d – h and [(6‐bromohexyl)oxy]‐substituted pentakis(alkyloxy)triphenylenes 14a – c (Scheme 5). Despite the bulky substituents, the respective target 1,1′‐biisoquinolines 12, 13 , and 15 were isolated in 14–86% yield (Table).     

Density-and-temperature-dependent volume translation for the SRK EOS: 1. Pure fluids

A mathematical framework for applying a density-and-temperature-dependent volume translation in a thermodynamically consistent manner was developed. Volumetric equations of state (EOS)s that incorporate this translation procedure can be used to generate derived properties, such as fugacity and enthalpy departure, that are based on isothermal departure or residuals from ideal gas state conditions. This kind of translation serves to improve the original EOS and not simply act as a correlation for molar volumes. A density-and-temperature-modified translation of this type was applied to the Soave–Redlich–Kwong EOS and was shown to possess accuracy for saturation pressure predictions equivalent to the untranslated EOS, as well as greatly improved density predictions compared to what is available when using only constant valued translation. The EOS translated in this manner retains many of the important features of the untranslated EOS, such as explicit calculation of volume roots, while having the representation capabilities of substantially more complicated models, such as the extended virial equation of Benedict, Webb, Rubin, and Starling.     

Naphthyridines. Part 3: First example of the polyfunctionally substituted 1,2,4-triazolo[1,5-g][1,6]naphthyridines ring system

Treatment of 1,2,4-triazoles (1) with diethylmalonate in bromobenzene gave 1,2,4-triazolo-[1,5-a]pyridines 2. Chlorination of 2 using POCl₃/DMF (Vilsmeier reagent) led to the isolation of 7-chloro-6-formyl-1,2,4-triazolo[1,5-a]pyridine derivative 4, which reacted with the stabilized ylid 5 to afford 6-ethoxycarbonylvinyl-1,2,4-triazolo[1,5-a]-pyridines 6. Azidation of 6 yielded the corresponding azido compound 7, (Scheme 2). Reduction of 7 with Na₂S₂O₄ gave the corresponding 7-amino compound 8, which cyclized in boiling DMF to give the novel 1,2,4-triazolo[1,5-g][1,6]naphthyridines 9. On the other hand, reacting 7 with one equivalent of PPh₃ (aza-Wittig reaction) in CH₂Cl₂ gave 7-imino-phosphorane derivative 10, and subsequent cyclization in boiling DMF afforded the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 11 (Scheme 3). However, treatment of 10 with phenyl isothiocyanate in 1,2-dichlorobenzene at reflux temperature gave the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 14 (Scheme 4). Refluxing 6 with excess of a primary amines 15a,b in absolute. EtOH yielded the corresponding 7-alkyl-amino-1,2,4-triazolo[1,5-a]pyridines 16a,b. These obtained amines 16a,b underwent intramolecular heterocyclization in boiling DMF to give the novel 9-alkyl-1,2,4-triazolo[1,5-g][1,6]-naphthyridines 17a,b, in excellent yields (Scheme 5).