Comparative pyrolysis upcycling of polystyrene waste: thermodynamics, kinetics, and product evolution profile

Pyrolysis is one important way to treat polystyrene waste and upcycle it into useful materials. A comparative pyrolysis study of virgin polystyrene (VPS) and two types of commonly used polystyrene products, expanded polystyrene (EPS) and polystyrene container (CPS) was carried out. Various values were found in the thermodynamic study and kinetic study of VPS, EPS, and CPS pyrolysis, suggesting distinct thermal degradation characteristics of these materials. The energy barrier order of the pyrolysis processes was EPS, CPS, VPS, showing activation energy of 230, 219, and 145 kJ mol^?1, respectively. The order of amount of heat absorbed was EPS, CPS, VPS, with enthalpy of 224, 213, and 139 kJ mol^?1, respectively. The reaction favorability order was EPS, CPS, and VPS with Gibbs free energy of 118, 132, and 210 kJ mol^?1, respectively. Thermogravimetric analysis indicated the use of high heating rate would increase the reaction rate and shorten the reaction time. Product evolution profiles showed that VPS and CPS pyrolysis produced mainly aromatics, while EPS pyrolysis produced aromatics at the initial phase of the reaction and aliphatic hydrocarbon at the latter phase. The diverse pyrolysis behaviors of VPS, EPS, and CPS demonstrated that an examination on different polystyrene materials was desired to optimize the pyrolysis conditions and product distribution, and thus benefit the process of valuable materials recovery.     

NEXAFS measurements of the molecular ordering in the boundary layers of liquid crystalline free standing films

By near edge X-ray absorption fine-structure (NEXAFS) spectroscopy a finite molecular tilt angle in the surface layer of a free standing film in the liquid crystalline smectic A phase of C7 was directly detected. Analysis of the angular dependent intensities of the oxygen K edge NEXAFS spectra leads to an average tilt angle of the molecules in the surface layer of about 34°, which is characteristic for the bulk smectic C* phase of C7.     

Synthesis of mesocyclic and macrocyclic polythioethers using the cesium dithiolate technique

The mesocyclic trithioethers, 1,4,7-trithiacyclodecane, 1,4,7-trithiacycloundecane, 1,4,8-trithiacycloundecane, and 1,5,9-trithiacyclododecane; the mesocyclic trithioether ketones, 1,4,7-trithiacyclodecan-9-one; 1,4,8-trithiacycloundecan-6-one, and 1,5,9-trithiacyclododecan-3-one; and the mesocyclic trithioether alcohols, 1,4,7-trithiacyclodecan-9-ol, 1,4,8-trithiacycloundecan-6-ol, and 1,5,9-trithiacyclododecan-3-ol, have been synthesized using the cesium dithiolate technique. In some cases, the corresponding macrocyclic hexathioether was isolated from the reaction mixture in addition to the mesocyclic trithioether; 1,4,7,11,14,17-hexathiacycloeicosane, 1,4,7,11,14,17-hexathiacycloeicosan-9,19-dione, 1,4,7,12,15,18-hexathiacyclodocosane, and 1,5,9,13,17,21-hexathiacyclotetracosane. Single-crystal X-ray structures have been determined for 1,5,9-trithiacyclododecan-3-ol and 1,4,7,12,15,18-hexathiacyclodocosane. For 1,5,9-trithiacyclododecane-3-ol, the compound crystallizes in the monoclinic space group, C2/c, with a = 10.5926( 9 ) Å, b = 15.582(2) Å, c = 13.6015(8) Å, β = 98.186(6)⁰, Z = 8, and R = 0.038. The macrocycle, 1,4,7,12,15,18-hexathiacyclodocosane, crystallizes in the orthorhombic space group, Pbca, with a = 21.406(5) Å, b = 9.810(2) Å, c = 10.225(2) Å, Z = 4, and R = 0.020.     

Self-organization of gold atoms on a polar FeO(111) surface

The spatial distribution of single Au atoms on a thin FeO film has been investigated by low-temperature scanning tunneling microscopy and spectroscopy. The adatoms preferentially adsorb on distinct sites of the Moiré cell formed by the oxide layer and the Pt(111) support and arrange into a well-ordered hexagonal superlattice with 25 angstroms lattice constant. The self-organization is the consequence of an inhomogeneous surface potential within the FeO Moiré cell and substantial electrostatic repulsion between the adatoms.     

A variational principle for the scattered wave

A Schwinger-type variational principle is presented for the scattered field in the case of scalar wave scattering with an arbitrary field incident on an object of arbitrary shape with homogeneous Dirichlet boundary conditions. The result is variationally invariant at field points ranging from the surface of the scatterer to the farfield and is an important extension of the usual Schwinger variational principle for the scattering amplitude, which is a farfield quantity. Also, a generic procedure, physically motivated by the general principles of boundary conditions and shadowing, is presented for constructing simple trial functions to approximate the fields. The variational principle and the trial function design are tested for the special case of a spherical scatterer and accurate answers are found over the entire frequency range.     

Simulated caustic patterns for dynamic crack growth in a plate based on a three-dimensional numerical analysis

The rapid growth of a through-the-thickness crack in a nominally elastic plate under Mode I conditions is considered, with emphasis on the three-dimensional aspects of the elastodynamic crack growth process. For points near the crack edge, the assumptions on stress state consistent with plane stress analysis are not valid, and the possibility of an inertial effect associated with rapid lateral contraction must be considered. The steady crack growth process is analyzed here by means of the finite element method, and the degree to which the local fields are described by plane stress analysis is established. In addition, synthetic shadow spot patterns are generated from the numerical three-dimensional solutions. The inferred values of stress intensity factor are compared with the values of the corresponding plane stress dynamic stress intensity factor.     

Formaldehyde Formation on Vanadium Oxide Surfaces V2O3(0001) and V2O5(001): How does the Stable Methoxy Intermediate Form?

Hydroxy‐mediated methoxy formation or stabilization is probably an important process in many methanol adsorption systems. Hydrogen atoms originating from the scission of the methanol O? H bond react with the substrate and form water. This process may result 1) in the production of additional surface defects as reactive centers for methoxy formation and 2) in the stabilization of methoxy groups by suppression of methanol formation.

     

Phytotherapy in Integrative Oncology—An Update of Promising Treatment Options

Modern phytotherapy is part of today’s conventional evidence-based medicine and the use of phytopharmaceuticals in integrative oncology is becoming increasingly popular. Approximately 40% of users of such phytopharmaceuticals are tumour patients. The present review provides an overview of the most important plants and nature-based compounds used in integrative oncology and illustrates their pharmacological potential in preclinical and clinical settings. A selection of promising anti-tumour plants and ingredients was made on the basis of scientific evidence and therapeutic practical relevance and included Boswellia, gingko, ginseng, ginger, and curcumin. In addition to these nominees, there is a large number of other interesting plants and plant ingredients that can be considered for the treatment of cancer diseases or for the treatment of tumour or tumour therapy-associated symptoms. Side effects and interactions are included in the discussion. However, with the regular and intended use of phytopharmaceuticals, the occurrence of adverse side effects is rather rare. Overall, the use of defined phytopharmaceuticals is recommended in the context of a rational integrative oncology approach.     

Directed synthesis of noncentrosymmetric molybdates using composition space analysis

A systematic investigation of the factors governing the reaction product composition, hydrogen bonding, and symmetry was conducted in the MoO3/3-aminoquinuclidine/H2O system. Composition space analysis was performed through 36 individual reactions under mild hydrothermal conditions using racemic 3-aminoquinuclidine. Single crystals of three new compounds, [C7H16N2][Mo3O10] x H2O, [C7H16N2]2[Mo8O26] x H2O, and [C7H16N2]2[Mo8O26] x 4 H2O, were grown. The relative phase stabilities for these products are dependent upon the reactant mole fractions in the initial reaction gel. This phase stability information was used to direct the synthesis of two new noncentrosymmetric compounds, using either (S)-(-)-3-aminoquinuclidine dihydrochloride or (R)-(+)-3-aminoquinuclidine dihydrochloride. [(R)-C7H16N2]2[Mo8O26] and [(S)-C7H16N2]2[Mo8O26] both crystallize in the noncentrosymmetric space group P2(1) (No. 4), which has the polar crystal class 2 (C2). The second-harmonic generation activities were measured on sieved powders. The structure-directing properties of the molybdate components in each compound were determined using bond valence sums. The structures of all five compounds were determined using single-crystal X-ray diffraction.     

Analysis of the substrate specificity of the Dim-5 histone lysine methyltransferase using peptide arrays

Histone methylation is an epigenetic mark essential for gene regulation and development. We introduce peptide SPOT synthesis to study sequence specificity of the Dim-5 histone-3 lysine-9 methyltransferase. Dim-5 recognizes R8-G12 of the H3 tail with T11 and G12 being the most important specificity determinants. Exchange of H3 tail residue S10 and T11 by E strongly reduced methylation by Dim-5, suggesting that phosphorylation of S10 or T11 may regulate the activity of Dim-5. In the Dim-5/peptide structure, E227 interacts with H3R8 and D209 with H3-S10. Mutations of E227 or D209 caused predictable changes in the substrate preference, illustrating that peptide recognition of histone methyltransferases can be altered by protein design. Comparative analyses of peptide arrays with wild-type and mutant enzymes, therefore, are well suited to investigate the target specificity of protein methyltransferases and study epigenetic crosstalk.