Hydrogen dissociation and diffusion on Ni- and Ti-doped Mg(0001) surfaces

It is well-known, both theoretically and experimentally, that alloying MgH(2) with transition elements can significantly improve the thermodynamic and kinetic properties for H(2) desorption, as well as the H(2) intake by Mg bulk. Here, we present a density functional theory investigation of hydrogen dissociation and surface diffusion over a Ni-doped surface and compare the findings to previously investigated Ti-doped Mg(0001) and pure Mg(0001) surfaces. Our results show that the energy barrier for hydrogen dissociation on the pure Mg(0001) surface is high, while it is small/null when NiTi are added to the surface as dopants. We find that the binding energy of the two H atoms near the dissociation site is high on Ti, effectively impeding diffusion away from the Ti site. By contrast, we find that on Ni, the energy barrier for diffusion is much reduced. Therefore, although both Ti and Ni promote H(2) dissociation, only Ni appears to be a good catalyst for Mg hydrogenation, allowing diffusion away from the catalytic sites. Experimental results corroborate these theoretical findings, i.e., faster hydrogenation of the Ni-doped Mg sample as opposed to the reference Mg- or Ti-doped Mg.     

金的化学状态对Au／CoCeOx催化剂CO氧化性能的影响

以CoCeOx复合氧化物为载体,采用沉积沉淀法制备了负载型的金催化剂,并通过不同温度的预处理控制Au的化学状态. 使用粉末X射线衍射、高分辨透射电子显微镜、程序升温还原和X射线光电子能谱对催化剂进行了表征,考察了在室温条件下该系列催化剂的一氧化碳氧化性能. 结果表明, Au/CoCeOx催化剂的CO氧化性能与催化剂表面Au 的含量成正比, Au 可能是反应的主要活性物种. 添加水汽对反应有一定的促进作用,但由于Au 不能稳定存在,特别是当催化剂表面Au 的含量过高时,在水汽的作用下Au 迅速发生歧化反应,使得催化剂的性能下降.     

In defense of adiabatic ϕ/ψ mapping for cellobiose and other disaccharides

Thorough conformational study of cellobiose requires consideration of numerous arrangements of the exocyclic groups. Therefore, it is customary to prepare a number of structures with different arrangements of hydroxyl and hydroxymethyl groups. These “starting geometries” are then given different values of the glycosidic linkage torsion angles ϕ and ψ. At each increment of ϕ and ψ, the energy is calculated. Usually, the final product is an “adiabatic” contour plot of the lowest energy at each ϕ/ψ point after considering all of the starting geometries. The present paper advocates for adiabatic maps despite the statement by Schnupf and Momany (preceding paper) that adiabatic maps are not of interest because they contain sparse details about the structures at each minimum. Similar information is computed by their method and adiabatic mapping, and comparable details can be provided from adiabatic studies. Although Schnupf and Momany presented maps from calculations in vacuum and in water that considered all of their calculated energies, they favored the presentation of two to four maps for each of 36 individual minima, each with its own zero of relative energy. However, previous work showed that more structures are needed to provide the lowest energies at each point in ϕ/ψ space. Following their preferred strategy would result in even more maps when the added structures are considered. The need to map individual minima can be avoided by starting calculations with the same exocyclic orientations at each ϕ/ψ point instead of using the preceding optimized structure to start the next energy minimization. Using the same orientations at each point allows periodic maps that depict barriers between minima.     

镁掺杂氧化铈整体式催化剂催化CO2和CH3OH直接合成碳酸二甲酯

采用共沉淀法成功地合成了不同Mg掺杂量的Ce_1-xMg_xO₂(x=0.05、0.10、0.15、0.20)固溶体催化材料,并运用透射电子显微镜(TEM)、X射线衍射(XRD)、氮气吸附-脱附测试、拉曼光谱、X射线光电子能谱(XPS)、CO₂程序升温脱附(CO₂-TPD)等技术对这些材料进行了表征。结果发现,通过调控CeO₂晶格中Mg的含量,可以调控所制备的Ce_1-xMg_xO₂催化材料的粒径、比表面积、表面缺陷等。其中Ce_0.90Mg_0.10O₂展现了最佳的表面性质,具有最小的平均粒径(约5.8 nm),最大的比表面积(约136 m2·g^-1)以及最高的表面氧含量(31.98%)。将Ce_1-xMg_xO₂催化材料涂覆在堇青石蜂窝陶瓷上制成整体催化剂,考察其对CO₂和CH₃OH直接合成碳酸二甲酯的催化性能。在140℃、2.4 MPa、反应2 h的条件下,Ce_0.90Mg_0.10O₂整体催化剂上碳酸二甲酯的收率高达20.21%,催化效果明显优于CeO₂和其余的Ce_1-xMg_xO₂(x=0.05、0.15、0.20)催化材料。     

Comparative properties of cellulose nano-crystals from native and mercerized cotton fibers

Stable aqueous suspensions of cellulose nano-crystals (CNCs) were fabricated from both native and mercerized cotton fibers by sulfuric acid hydrolysis, followed by high-pressure homogenization. Fourier transform infrared spectrometry and wide-angle X-ray diffraction data showed that the fibers had been transformed from cellulose I (native) to cellulose II (mercerized) crystal structure, and these polymorphs were retained in the nanocrystals, giving CNC-I and CNC-II. Transmission electron microscopy showed rod-like crystal morphology for both types of crystals under the given processing conditions with CNC-II having similar width but reduced length. Freeze-dried agglomerates of CNC-II had a much higher bulk density than that of CNC-I. Thermo-gravimetric analysis showed that CNC-II had better thermal stability. The storage moduli of CNC-II suspensions at all temperatures were substantially larger than those of CNC-I suspensions at the same concentration level. CNC-II suspensions and gels were more stable in response to temperature increases. Films of CNC and Poly(ethylene oxide) were tested. Both CNC-I/PEO and CNC-II/PEO composites showed increased tensile strength and elongation at break compared to pure PEO. However, composites with CNC-II had higher strength and elongation than composites with CNC-I.     

The Preparation Of 2-[4,5-Dihydro-3-Aryl-5-Isoxazolyl]-Phenols From C(α),O-Dilithiooximes and Lithiated Hydroxyaryl Aldehydes

C(a), O-Oximes were dilithiated in excess lithium diisopropylamide, and the resulting intermediates were condensed with lithiated hydroxyphenyl aldehydes and related materials and cyclized with acid to afford 2-[4,5-dihydro-3-aryl-5-isoxazolyl]phenols, substituted 4,5-dihydroisoxazoles (2-isoxazolines).     

Correlation between the superconducting transition temperature and anisotropic quasiparticle scattering in Tl2Ba2CuO6+delta

Angle-dependent magnetoresistance measurements are used to determine the isotropic and anisotropic components of the transport scattering rate in overdoped Tl2Ba2CuO6+delta for a range of Tc values between 15 and 35 K. The size of the anisotropic scattering term is found to scale linearly with Tc, establishing a link between the superconducting and normal state physics. A comparison with results from angle resolved photoemission spectroscopy indicates that the transport and quasiparticle lifetimes are distinct.     

A numerical implementation of the length-scale independent phase field method

The phase field method for fracture integrates the Griffith theory and damage mechanics approach to predict crack initiation and propagation within one framewor...     

Heuristic Solution Methods for the Multilevel Generalized Assignment Problem

The multilevel generalized assignment problem is a problem of assigning agents to tasks where the agents can perform tasks at more than one efficiency level. A profit is associated with each assignment and the objective of the problem is profit maximization. Two heuristic solution methods are presented for the problem. The heuristics are developed from solution methods for the generalized assignment problem. One method uses a regret minimization approach whilst the other method uses a repair approach on a relaxation of the problem. The heuristics are able to solve moderately large instances of the problem rapidly and effectively. Procedures for deriving an upper bound on the solution of the problem are also described. On larger and harder instances of the problem one heuristic is particularly effective.