Janus micelles induced by olefin metathesis

A facile one-step procedure for hydrophobic modification and simultaneous TEM contrast enhancement via a regioselective olefin metathesis reaction using Grubbs' catalyst is presented. Polyether diblock copolymers were investigated, and both the chain ends of the hydrophilic and the hydrophobic block were hydrophobically modified. Modification of the hydrophilic block results in nonsymmetric supramolecular structures (Janus micelles) which self-assemble into larger hierarchically organized super-micelles.     

A quasi-time-resolved CryoTEM study of the nucleation of CaCO3 under langmuir monolayers

Calcium carbonate biomineralization uses complex assemblies of macromolecules that control the nucleation, growth, and positioning of the mineral with great detail. To investigate the mechanisms involved in these processes, for many years Langmuir monolayers have been used as model systems. Here, we descibe the use of cryogenic transmission electron microscopy in combination with selected area electron diffraction as a quasi-time-resolved technique to study the very early stages of this process. In this way, we assess the evolution of morphology, polymorphic type, and crystallographic orientation of the calcium carbonate formed. For this, we used a self-assembled Langmuir monolayer of a valine-based bisureido surfactant (1) spread on a CaCl2-containing subphase and deposited on a holey carbon TEM grid. In a controlled environment, the grid is exposed to an atmosphere containing NH3 and CO2 (the (NH4)2CO3 diffusion method) for precisely determined periods of time (reaction times 30-1800 s) before it was plunged into melting ethane. This procedure allows us to observe amorphous calcium carbonate (ACC) particles growing from a few tens of nanometers to hundreds of nanometers and then crystallizing to form [00.1] oriented vaterite. The vaterite in turn transforms to yield [10.0] oriented calcite. We also performed the reaction in the absence of monolayer or in the presence of a nondirective monolayer of surfactant containing an oligo(ethylene oxide) 2 head group. Both experiments also showed the formation of a transient amorphous phase followed by a direct conversion into randomly oriented calcite crystals. These results imply the specific though temporary stabilization of the (00.1) vaterite by the monolayer. However, experiments performed at higher CaCl2 concentrations show the direct conversion of ACC into [10.0] oriented calcite. Moreover, prolonged exposure to the electron beam shows that this transformation can take place as a topotactic process. The formation of the (100) calcite as final product under different conditions shows that the surfactant is very effective in directing the formation of this crystal plane. In addition, we present evidence that more than one type of ACC is involved in the processes described.     

Electron tomography shows molecular anchoring within a layer-by-layer film

The layer-by-layer self-assembly of thin films consisting of alternating layers of DNA and bis-urea nanoribbons prevents diffusion of the components within the film and allows the anchoring of biotinylated molecules through molecular recognition in a predetermined layer of the film. Electron tomography demonstrates with nanometer precision the location of gold-labeled streptavidin bound to the incorporated biotinylated molecules.     

Osmotically induced morphological changes of extruded dioctadecyldimethylammonium chloride (DODAC) dispersions

Extruded vesicles, which are often used as models for living cells, can change their morphology when they are diluted into a hyperosmotic medium. Different morphological changes were observed with extruded dioctadecyldimethylammonium chloride (DODAC) vesicles after dilution with a nonionic (sucrose) and ionic (CaCl2) osmotic agent above and below the gel-to-liquid crystalline transition temperature. By means of turbidimetry, dynamic light scattering, and cryo-transmission electron microscopy, it was seen that the vesicles only deflated when they were in the gel state, whereas in the liquid crystalline state, an ionic osmotic agent could induce twinning of the vesicles, reminiscent to endocytosis. The latter could occur as a result of the combined effects of reduced repulsion, local dehydration, and reduced bending rigidity induced by the ionic agent.     

On the effects of dephasing due to local gradients in diffusion tensor imaging experiments: relevance for diffusion tensor imaging fiber phantoms

The effect of susceptibility differences between fluid and fibers on the properties of DTI fiber phantoms was investigated. Thereto, machine-made, easily producible and inexpensive DTI fiber phantoms were constructed by winding polyamide fibers of 15 microm diameter around a circular acrylic glass spindle. The achieved fractional anisotropy was 0.78+/-0.02. It is shown by phantom measurements and Monte Carlo simulations that the transversal relaxation time T(2) strongly depends on the angle between the fibers and the B(0) field if the susceptibilities of the fibers and fluid are not identical. In the phantoms, the measured T(2) time at 3 T decreased by 60% for fibers running perpendicular to B(0). Monte Carlo simulations confirmed this result and revealed that the exact relaxation time depends strongly on the exact packing of the fibers. In the phantoms, the measured diffusion was independent of fiber orientation. Monte Carlo simulations revealed that the measured diffusion strongly depends on the exact fiber packing and that field strength and -orientation dependencies of measured diffusion may be minimal for hexagonal packing while the diffusion can be underestimated by more than 50% for cubic packing at 3 T. To overcome these effects, the susceptibilities of fibers and fluid were matched using an aqueous sodium chloride solution (83 g NaCl per kilogram of water). This enables an orientation independent and reliable use of DTI phantoms for evaluation purposes.     

Biomolecules as soft matter surfaces

Soft matter surfaces, such as organic layers or polymer surfaces, are dynamical and inhomogeneous (only in special cases crystalline). In contact with solutions, the situation becomes more complex, but still addressable with Surface Science methods. In single molecules and supramolecular assemblies, a large fraction of the molecule forms the surface. Can a single (bio) molecule be interpreted as a soft matter surface? A plant virus with a well-defined tubular structure demonstrates the problems, for which molecular dynamics simulations can give some answers.     

Sustainable radical reduction through catalyzed hydrogen atom transfer reactions (CHAT-reactions)

A system with coupled catalytic cycles is described that allows radical reduction by catalyzed hydrogen atom transfer (CHAT) from transition metal hydrides. These intermediates are generated through H₂ activation. Radical generation is carried out by titanocene catalyzed electron transfer to epoxides. The reaction provides a novel entry into the atom-economical reduction of radicals that has long been considered as a critical issue for the industrial application of radical chemistry.     

Simulation of Deep Drawing of Carbon Fibre Prepregs

The simulation of prepregs must regard highly anisotropic, viscoelastic and thermal-chemical properties. To this end a constitutive model is split into an anisotropic elastic part, which represents the fibre fraction and an isotropic, viscoelastic part, representing the matrix. The second part also contains curing, causing a dependency on time and temperature. During real deep-drawing processes large deformations up to 50 % occur, which is considered in a formulation at large strains. This model contains an anisotropic elastic part based on a Neo-Hooke law enhanced by an anisotropic part. A viscoelastic part is added using Hencky-strains and the work-conjugate Hill-stress to transfer a model for small strains into large strains. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Hetero‐Multifunctional Poly(ethylene glycol) Copolymers with Multiple Hydroxyl Groups and a Single Terminal Functionality

Hetero‐multifunctional poly(ethylene glycol‐co‐glycerol) random copolymers with multiple hydroxyl functionalities and a single terminal functionality have been prepared by copolymerization of ethylene oxide (EO) and ethoxy ethyl glycidyl ether (EEGE) with the use of a suitable initiator, introducing a protected amino group or a double bond, respectively. Acidic deprotection was used for removal of the acetal protecting groups in the chain, and the terminal amino group was regenerated by catalytic hydrogenation. A series of copolymers with narrow polydispersity was obtained, varying comonomer fractions from 3 to 67% and molecular weights in the range of 5 000–32 000 g · mol⁻¹ (1.05 < < 1.25). Molecular and thermal characterization was carried out using ¹H‐ and ¹³C NMR, SEC and differential scanning calorimetry (DSC).

     

Hyperbranched PEG by Random Copolymerization of Ethylene Oxide and Glycidol

The synthesis of hyperbranched poly(ethylene glycol) (hbPEG) in one step was realized by random copolymerization of ethylene oxide and glycidol, leading to a biocompatible, amorphous material with multiple hydroxyl functionalities. A series of copolymers with moderate polydispersity ( < 1.8) was obtained with varying glycidol content (3–40 mol‐%) and molecular weights up to 49 800 g mol⁻¹. The randomly branched structure of the copolymers was confirmed by ¹H and ¹³C NMR spectroscopy and thermal analysis (differential scanning calorimetry). MTS assay demonstrated low cell toxicity of the hyperbranched PEG, comparable to the highly established linear PEG.