A family of 13 tetranuclear zinc(II)-lanthanide(III) complexes of a [3+3] Schiff-base macrocycle derived from 1,4-diformyl-2,3-dihydroxybenzene

A family of thirteen tetranuclear heterometallic zinc(II)-lanthanide(III) complexes of the hexa-imine macrocycle (L(Pr))(6-), with general formula Zn(II)(3)Ln(III)(L(Pr))(NO(3))(3)·xsolvents (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm or Yb), were prepared in a one-pot synthesis using a 3:1:3:3 reaction of zinc(II) acetate, the appropriate lanthanide(III) nitrate, the dialdehyde 1,4-diformyl-2,3-dihydroxybenzene (H(2)L(1)) and 1,3-diaminopropane. A hexanuclear homometallic zinc(II) macrocyclic complex [Zn(6)(L(Pr))(OAc)(5)(OH)(H(2)O)]·3H(2)O was obtained using a 2:0:1:1 ratio of the same reagents. A control experiment using a 1:0:1:1 ratio failed to generate the lanthanide-free [Zn(3)(L(Pr))] macrocyclic complex. The reaction of H(2)L(1) and zinc(II) acetate in a 1:1 ratio yielded the pentanuclear homometallic complex of the dialdehyde H(2)L(1), [Zn(5)(L(1))(5)(H(2)O)(6)]·3H(2)O. An X-ray crystal structure determination revealed [Zn(3)(II)Pr(III)(L(Pr))(NO(3))(2)(DMF)(3)](NO(3))·0.9DMF has the large ten-coordinate lanthanide(III) ion bound in the central O(6) site with two bidentate nitrate anions completing the O(10) coordination sphere. The three square pyramidal zinc(II) ions are in the outer N(2)O(2) sites with a fifth donor from DMF. Measurement of the magnetic properties of [Zn(II)(3)Dy(III)(L(Pr))(NO(3))(3)(MeOH)(3)]·4H(2)O with a weak external dc field showed that it has a frequency-dependent out-of-phase component of ac susceptibility, indicative of slow relaxation of the magnetization (SMM behaviour). Likewise, the Er and Yb analogues are field-induced SMMs; the latter is only the second example of a Yb-based SMM. The neodymium, ytterbium and erbium complexes are luminescent in the solid phase, but only the ytterbium and neodymium complexes show strong lanthanide-centred luminescence in DMF solution.     

Synthesis of 3-amino-4-fluoropyrazoles

Fluorinated pyrazoles bearing additional functional groups that allow further functionalization are of considerable interest as building blocks in medicinal chemistry. The developed synthetic strategy for new 3-amino-4-fluoropyrazoles consists of a monofluorination of β-methylthio-β-enaminoketones using 1-(chloromethyl)-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (Selectfluor) toward the corresponding monofluorinated enaminoketones, followed by condensation with different hydrazines.     

Ionothermal Synthesis of Imide‐Linked Covalent Organic Frameworks

Covalent organic frameworks (COFs) are an extensively studied class of porous materials, which distinguish themselves from other porous polymers in their crystallinity and high degree of modularity, enabling a wide range of applications. COFs are most commonly synthesized solvothermally, which is often a time‐consuming process and restricted to well‐soluble precursor molecules. Synthesis of polyimide‐linked COFs (PI‐COFs) is further complicated by the poor reversibility of the ring‐closing reaction under solvothermal conditions. Herein, we report the ionothermal synthesis of crystalline and porous PI‐COFs in zinc chloride and eutectic salt mixtures. This synthesis does not require soluble precursors and the reaction time is significantly reduced as compared to standard solvothermal synthesis methods. In addition to applying the synthesis to previously reported imide COFs, a new perylene‐based COF was also synthesized, which could not be obtained by the classical solvothermal route. In situ high‐temperature XRPD analysis hints to the formation of precursor–salt adducts as crystalline intermediates, which then react with each other to form the COF.     

4‐(3‐Azaniumylpropyl)morpholin‐4‐ium chloride hydrogen oxalate: an unusual example of a dication with different counter‐anions

The mixed organic–inorganic title salt, C₇H₁₈N₂O²⁺·C₂HO₄⁻·Cl⁻, forms an assembly of ionic components which are stabilized through a series of hydrogen bonds and charge‐assisted intermolecular interactions. The title assembly crystallizes in the monoclinic C2/c space group with Z = 8. The asymmetric unit consists of a 4‐(3‐azaniumylpropyl)morpholin‐4‐ium dication, a hydrogen oxalate counter‐anion and an inorganic chloride counter‐anion. The organic cations and anions are connected through a network of N—H...O, O—H...O and C—H...O hydrogen bonds, forming several intermolecular rings that can be described by the graph‐set notations R₃³(13), R₂¹(5), R₁²(5), R₂¹(6), R₂³(6), R₂²(8) and R₃³(9). The 4‐(3‐azaniumylpropyl)morpholin‐4‐ium dications are interconnected through N—H...O hydrogen bonds, forming C(9) chains that run diagonally along the ab face. Furthermore, the hydrogen oxalate anions are interconnected via O—H...O hydrogen bonds, forming head‐to‐tail C(5) chains along the crystallographic b axis. The two types of chains are linked through additional N—H...O and O—H...O hydrogen bonds, and the hydrogen oxalate chains are sandwiched by the 4‐(3‐azaniumylpropyl)morpholin‐4‐ium chains, forming organic layers that are separated by the chloride anions. Finally, the layered three‐dimensional structure is stabilized via intermolecular N—H...Cl and C—H...Cl interactions.     

Physicochemical characterization of degradable thermosensitive polymeric micelles

Amphiphilic AB block copolymers consisting of thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol), pHPMAmDL-b-PEG, were synthesized via a macroinitiator route. Dynamic light scattering measurements showed that these block copolymers form polymeric micelles in water with a size of around 50 nm by heating of an aqueous polymer solution from below to above the critical micelle temperature (cmt). The critical micelle concentration as well as the cmt decreased with increasing pHPMAmDL block lengths, which can be attributed to the greater hydrophobicity of the thermosensitive block with increasing molecular weight. Cryogenic transmission electron microscopy analysis revealed that the micelles have a spherical shape with a narrow size distribution. 1H NMR measurements in D2O showed that the intensity of the peaks of the protons from the pHPMAmDL block significantly decreased above the cmt, indicating that the thermosensitive blocks indeed form the solidlike core of the micelles. Static light scattering measurements demonstrated that pHPMAmDL-b-PEG micelles with relatively large pHPMAmDL blocks possess a highly packed core that is stabilized by a dense layer of swollen PEG chains. FT-IR analysis indicated that dehydration of amide bonds in the pHPMAmDL block occurs when the polymer dissolved in water is heated from below to above its cmt. The micelles were stable when an aqueous solution of micelles was incubated at 37 degrees C and at pH 5.0, where the hydrolysis rate of lactate side groups is minimized. On the other hand, at pH 9.0, where hydrolysis of the lactic acid side groups occurs, the micelles started to swell after 1.5 h of incubation and complete dissolution of micelles was observed after 4 h as a result of hydrophilization of the thermosensitive block. Fluorescence spectroscopy measurements with pyrene loaded in the hydrophobic core of the micelles showed that when these micelles were incubated at pH 8.6 and at 37 degrees C the microenvironment of pyrene became increasingly hydrated in time during this swelling phase. The results demonstrate the potential applicability of pHPMAmDL-b-PEG block copolymer micelles for the controlled delivery of hydrophobic drugs.     

A quasi-time-resolved CryoTEM study of the nucleation of CaCO3 under langmuir monolayers

Calcium carbonate biomineralization uses complex assemblies of macromolecules that control the nucleation, growth, and positioning of the mineral with great detail. To investigate the mechanisms involved in these processes, for many years Langmuir monolayers have been used as model systems. Here, we descibe the use of cryogenic transmission electron microscopy in combination with selected area electron diffraction as a quasi-time-resolved technique to study the very early stages of this process. In this way, we assess the evolution of morphology, polymorphic type, and crystallographic orientation of the calcium carbonate formed. For this, we used a self-assembled Langmuir monolayer of a valine-based bisureido surfactant (1) spread on a CaCl2-containing subphase and deposited on a holey carbon TEM grid. In a controlled environment, the grid is exposed to an atmosphere containing NH3 and CO2 (the (NH4)2CO3 diffusion method) for precisely determined periods of time (reaction times 30-1800 s) before it was plunged into melting ethane. This procedure allows us to observe amorphous calcium carbonate (ACC) particles growing from a few tens of nanometers to hundreds of nanometers and then crystallizing to form [00.1] oriented vaterite. The vaterite in turn transforms to yield [10.0] oriented calcite. We also performed the reaction in the absence of monolayer or in the presence of a nondirective monolayer of surfactant containing an oligo(ethylene oxide) 2 head group. Both experiments also showed the formation of a transient amorphous phase followed by a direct conversion into randomly oriented calcite crystals. These results imply the specific though temporary stabilization of the (00.1) vaterite by the monolayer. However, experiments performed at higher CaCl2 concentrations show the direct conversion of ACC into [10.0] oriented calcite. Moreover, prolonged exposure to the electron beam shows that this transformation can take place as a topotactic process. The formation of the (100) calcite as final product under different conditions shows that the surfactant is very effective in directing the formation of this crystal plane. In addition, we present evidence that more than one type of ACC is involved in the processes described.     

Toward biodegradable nanogel star polymers via organocatalytic ROP

Organocatalytic ring opening polymerization (OROP) is used to effect the rapid, scalable, room temperature formation of size-controlled, highly uniform, polyvalent, nanogel star polymer nanoparticles of biodegradable composition.     

Embedding some Riemann surfaces into $${\mathbb {C}^2}$$ with interpolation

We prove that several types of open Riemann surfaces, including the finitely connected planar domains, embed properly into such that the values on any given discrete sequence can be arbitrarily prescribed. Kutzschebauch supported by Schweizerische Nationalfonds grant 200021-107477/1.     

Catalytic Asymmetric Oxidative γ‐Coupling of α,β‐Unsaturated Aldehydes with Air as the Terminal Oxidant

A novel concept for catalytic asymmetric coupling reactions is presented. Merging organocatalysis with single‐electron oxidation by using a catalytic amount of a copper(II) salt and air as the terminal oxidant, we have developed a highly stereoselective carbon–carbon oxidative coupling reaction of α,β‐unsaturated aldehydes. The concept relies on the generation of a dienamine intermediate, which is oxidized to an open‐shell activated species that undergoes highly selective γ‐homo‐ and γ‐heterocoupling reactions. In the majority of examples presented, only a single stereoisomer was formed.     

Preservation of the Pt(100) surface reconstruction after growth of a continuous layer of graphene

Scanning tunneling microscopy shows that a layer of graphene can be grown on the hex-reconstructed Pt(100) surface and that the reconstruction is preserved after growth. A continuous sheet of graphene can be grown across domain boundaries and step edges without loss of periodicity or change in direction. Density functional theory calculations on a simple model system support the observation that the graphene can have different rotation angles relative to the hex-reconstructed Pt surface. The graphene sheet direction can be changed by incorporating pentagon-heptagon defects giving rise to accommodation of edge dislocations. The defect formation energy and the induced buckling of the graphene have been characterized by DFT calculations.