Hyperoxygenation enhances the tumor cell killing of photofrin-mediated photodynamic therapy

Tumor hypoxia, either preexisting or as a result of oxygen depletion during photodynamic therapy (PDT) light irradiation, can significantly reduce the effectiveness of PDT-induced cell killing. To overcome tumor hypoxia and improve tumor cell killing, we propose using supplemental hyperoxygenation during Photofrin-PDT. The mechanism for the tumor cure enhancement of the hyperoxygenation-PDT combination is investigated using an in vivo-in vitro technique. A hypoxic tumor model was established by implanting mammary adenocarcinoma in the hind legs of mice. Light irradiation (200 J/cm2 at either 75 or 150 mW/cm2), under various oxygen supplemental conditions (room air, carbogen, 100% normobaric or hyperbaric oxygen), was delivered to animals that received 12.5 mg/kg Photofrin 24 h before light irradiation. Tumors were harvested at various time points after PDT and grown in vitro for colony formation analysis. Treated tumors were also analyzed histologically. The results show that when PDT is combined with hyperoxygenation, the hypoxic condition could be improved and the cell killing rate at various time points after PDT could be significantly enhanced over that without hyperoxygenation, suggesting an enhanced direct and indirect cell killing associated with high-concentration oxygen breathing. This study further confirms our earlier observation that when a PDT treatment is combined with hyperoxygenation it can be more effective in controlling hypoxic tumors.     

An Integrated Theory of Adsorption and Partition Mechanism and Eash Contribution to Solute Retention in Reversed Phase Liquid Chromatography

With the combination of the the stoichiometric displacement model for retention (SDM-R) in reversed phase liquid chromatography (RPLC) and the stoichiometric displacement model for adsorption (SDM-A) in physical chemistry,the total number of moles of the re-solvated methanol of stationary phase side.nr,and that of solute side in the mobile phase,q,corresponding the one mole of the desorbing solute,were separately determined and referred as the characterization parameters of the contributions of the adsorption mechanism and partition mechanism to the solute retention,respectively.A chromatographic system of insulin,using mobile phase consisting of the pseudo-homologue of alcohols(methanol,ethanol and 2-propanol)-water and trifluoroacetic acid was employed.The maximum number of the methanol layers on the stationary phase surface was found to be 10.6,only 3 of which being valid in usual RPLC,traditionally referred as a volume process in partition mechanism.However,it still follows the SDM-R.Both of q and nr of insulin were found not to be zero,indicating that the retention mechanism of insulin is a mixed mode of partition mechanism and adsorption mechanism.When methanol is used as the organic modifier,the ratio of q/nr was 1.13,indicating the contribution to insulin retention due to partition mechanism being a bit greater than that due to adsorption mechanism.A linear relationship between q,or nr and the carbon number of the pseudo-homologue in the mobile phase was also found.As a methodology for investigating the retention mechanism retention and behavior of biopolymers.a homologue of organic solvents as the organic modifier in mobile phase has also been explored.     

Preparation of 5-diaminomethylenebarbiturates by barbituric acid addition to carbodiimides

Through NMR spectroscopic monitoring of barbituric acid addition to carbodiimide, a general synthetic procedure for the preparation of 5-diaminomethylenebarbiturates (DABA) was developed. This procedure is very simple and applicable to the preparation of large quantities of DABA derivatives. Through an X-ray structural study of one of the DABA derivatives, it was established that these compounds have an ylide-type structure with strong charge separation within the molecule.     

An automated method for the analysis of stable isotope labeling data in proteomics

An algorithm is presented for the generation of a reliable peptide component peak table from liquid chromatography-mass spectrometry (LC-MS) and subsequent quantitative analysis of stable isotope coded peptide samples. The method uses chemical noise filtering, charge state fitting, and deisotoping toward improved analysis of complex peptide samples. Overlapping peptide signals in mass spectra were deconvoluted by correlation with modeled peptide isotopic peak profiles. Isotopic peak profiles for peptides were generated in silico from a protein database producing reference model distributions. Doublets of heavy and light labeled peak clusters were identified and compared to provide differential quantification of pairs of stable isotope coded peptides. Algorithms were evaluated using peptides from digests of a single protein and a seven-protein mixture that had been differentially coded with stable isotope labeling agents and mixed in known ratios. The experimental results correlated well with known mixing ratios.     

Identification of low molecular weight proteins isolated by 2-D liquid separations

Proteins with molecular mass (M(r)) <20 kDa are often poorly separated in 2-D sodium dodecyl sulfate polyacrylamide gel electrophoresis. In addition, low-M(r) proteins may not be readily identified using peptide mass fingerprinting (PMF) owing to the small number of peptides generated in tryptic digestion. In this work, we used a 2-D liquid separation method based on chromatofocusing and non-porous silica reversed-phase high-performance liquid chromatography to purify proteins for matrix-assisted laser desorption/ionization time-of-flight mass spectrometric (MALDI-TOFMS) analysis and protein identification. Several proteins were identified using the PMF method where the result was supported using an accurate M(r) value obtained from electrospray ionization TOFMS. However, many proteins were not identified owing to an insufficient number of peptides observed in the MALDI-TOF experiments. The small number of peptides detected in MALDI-TOFMS can result from internal fragmentation, the few arginines in its sequence and incomplete tryptic digestion. MALDI-QTOFMS/MS can be used to identify many of these proteins. The accurate experimental M(r) and pI confirm identification and aid in identifying post-translational modifications such as truncations and acetylations. In some cases, high-quality MS/MS data obtained from the MALDI-QTOF spectrometer overcome preferential cleavages and result in protein identification.     

Novel perturbation expansion for the Langevin equation

We discuss the randomly driven systemdx/dt= -W(x) +f(t), wheref(t) is a Gaussian random function or stirring force withf(t)f(t)=2(t–t), andW(x) is of the formgx ¹⁺². The parameter is a measure of the nonlinearity of the equation. We show how to obtain the correlation functionsx(t)f(t)···x(t( n)) _f as a power series in. We obtain three terms in the expansion and show how to use Padé approximants to analytically continue the answer in the variable. By using scaling relations, we show how to get a uniform approximation to the equal-time correlation functions valid for allg and.     

Rapidly decaying solutions of the nonlinear Schrödinger equation

We consider global solutions of the nonlinear Schrödinger equation

Re4(CO)12[μ3-InRe(CO)5]4 und Re2(CO)8[μ-InRe(CO)5]2-cluster aus dem reaktionssystem In/Re2(CO)10 in xylol

The thermally stable solids Re₂(CO)₈[μ-InRe(CO)₅]₂ and Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ could be obtained by treatment of In with Re₂(CO)₁₀ in a bomb tube. A mechanism of the formation of the latter cluster from the first one is proposed. Compared with Re₂(CO)₈[μ-InRe(CO)₅]₂, Re₄(CO)₁₂[μ₃_InRe(CO)₅]₄ shows in polar solvents an unusual high stability, which can be explained by the higher coordination number of In with rhenium carbonyl ligands. Re₄(CO)₁₂-[μ₃-InRe(CO)₅]₄ dissolves monomerically in acetone, where as Re₂(CO)₈[μ-InRe(CO)₅]₂ dissociates yielding Re(CO)₅^? anions. Single-crystal X-ray analyses of Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ establish the metal skeleton. The central molecular fragment Re₄(CO)₁₂ contains a tetrahedral arrangement of four bonded Re atoms [ReRe 302.8 (5) pm]. The triangles of this fragment are capped with a μ₃-InRe(CO)₅ group each [InRe(terminal) 273.5 (7) pm; InRe (polyhedral) 281.8 (7) pm]. The bridging type of In atoms with the Re₄ tetrahedron and the metal skeleton was realized for the first time. By treating Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ with Br₂ the existence of Re(CO)₅ ligands could be proved by isolating BrRe(CO)₅.     

The effects of gamma irradiation on the microbiological, physical and sensory qualities of diced tomatoes

Diced Roma tomatoes were treated with gamma irradiation and evaluated for changes in microbial, physical, chemical and sensory properties. Dosages for Trial 1 were 0.0, 0.39, 0.56 and 1.82 kGy and in Trial 2, 0.0, 0.50, 1.24 and 3.70 kGy. Irradiation at 3.70 kGy resulted in no aerobic populations through day 12 and significantly fewer colonies through day 15 whereas yeast and mold populations experienced a 2 log reduction through day 12. Color, titratable acidity, and °Brix were not significantly affected by irradiation. Tissue firmness decreased with increasing dose but not with storage time. Treatment with 3.7 kGy decreased firmness by 50% and 20% with 0.5 kGy, however, the reduced firmness induced by 0.50 kGy was undetected by a 9 member trained sensory panel. A significant (p0.05) inverse correlation between changes in texture and water-soluble pectin (WSP) was determined while total pectin remained relatively constant and oxalate soluble pectin content decreased slightly with irradiation dose. The significant inverse correlation between the loss of firmness and WSP indicates that the changes in WSP play an important role in the tissue softening of tomatoes, This study indicates that irradiation at 0.5 kGy can reduce microbial counts substantially to improve microbial shelf life without adverse effects on sensory qualities.