Vergleichende Messungen des Zeta-Potentials von Faserstoffen durch Elektroosmose und Strömungsstrom/Strömungspotential

An apparatus for the determination of zetapotential is described, which allows measurement of both streaming potential and streaming current as well as electroosmosis with one and the same fiber diaphragm with various electrodes (calomel, Ag/AgCl, palladium). Measurements with glass fibers, fibers of polyacrylonitrile and of polyester, and with cellulose pulp show that identical values for the electrokinetic parameters are obtained independent of voltage applied during electroosmosis resp. pressure difference during streaming measurements. This allows the conclusion that the zetapotential in dilute electrolyte solution is here an unequivocally determinable figure.

Herrn Prof. Dr.R. C. Schulz mit den herzlichsten Glückwünschen zum 65. Geburtstag gewidmet.     

Mechanism of olefin metathesis with catalysis by ruthenium carbene complexes: density functional studies on model systems

Gradient-corrected (BP86) density functional calculations were used to study alternative mechanisms of the metathesis reactions between ethene and model catalysts [(PH(3))(L)Cl(2)Ru[double bond]CH(2)] with L=PH3 (I) and L=C(3)N(2)H(4)=imidazol-2-ylidene (II). On the associative pathway, the initial addition of ethene is calculated to be rate-determining for both catalysts (Delta G(22-25)*[double bond] kcal mol(-1)). The dissociative pathway starts with the dissociation of phosphane, which is rather facile (Delta G(298)* is approximately equal to 5-10 kcal mol(-1)). The resulting active species (L)Cl(2)Ru[double bond]CH(2) can coordinate ethene cis or trans to L. The cis addition is unfavorable and mechanistically irrelevant (Delta G(298)* is approximately equal to 21-25 kcal mol(-1)). The trans coordination is barrierless, and the rate-determining step in the subsequent catalytic cycle is either ring closure of the complex to yield the ruthenacyclobutane (catalyst I, Delta G(298)*=12 kcal mol(-1)), or the reverse reaction (catalyst II, ring opening, Delta G(298)*=10 kcal mol(-1)), that is, II is slightly more active than I. For both catalysts, the dissociative mechanism with trans olefin coordination is favored. The relative energies of the species on this pathway can be tuned by ligand variation, as seen in (PMe(3))(2)Cl(2)Ru[double bond]CH(2) (III), in which phosphane dissociation is impeded and olefin insertion is facilitated relative to I. The differences in calculated relative energies for the model catalysts I-III can be rationalized in terms of electronic effects. Comparisons with experiment indicate that steric effects must also be considered for real catalysts containing bulky substituents.     

Interactions between particles with an undulated contact line at a fluid interface: capillary multipoles of arbitrary order

A colloidal particle adsorbed at a fluid interface could have an undulated, or irregular contact line in the presence of surface roughness and/or chemical inhomogeneity. The contact-line undulations produce distortions in the surrounding liquid interface, whose overlap engenders capillary interaction between the particles. The convex and concave local deviations of the meniscus shape from planarity can be formally treated as positive and negative "capillary charges," which form "capillary multipoles." Here, we derive theoretical expressions for the interaction between two capillary multipoles of arbitrary order. Depending on the angle of mutual orientation, the interaction energy could exhibit a minimum, or it could represent a monotonic attraction. For undulation amplitudes larger than 5 nm, the interaction energy is typically much greater than the thermal energy kT. As a consequence, a monolayer from capillary multipoles exhibits considerable shear elasticity, and such monolayer is expected to behave as a two-dimensional elastic solid. These theoretical results could be helpful for the understanding of phenomena related to aggregation and ordering of particles adsorbed at a fluid interface, and for the interpretation of rheological properties of particulate monolayers. Related research fields are the particle-stabilized (Pickering) emulsions and the two-dimensional self-assembly of microscopic particles.     

The conformation of amine- and amide-terminated poly(propylene imine) dendrimers as investigated by molecular simulation methods

The parameters that influence the conformation of poly(propylene imine) dendrimers were investigated by molecular simulations using molecular mechanics and simulated annealing methods. Dendrimers with two types of peripheral units able to communicate via hydrogen bonding-amine and amide moieties-were considered in order to study the role that secondary interactions among the end groups have in the spatial organization of the dendritic branches. Radial atomic density profiles and radial atomic probability distributions were used to extract global properties, such as the degree of packing of the branches, the distribution of the monomers throughout the molecular volume, and the extent and characteristics of the surface region. Information was also obtained about the nature, location, and extent of formation of the hydrogen bonds, as well as their evolution with dendrimer generation and their assembly into networks. The analyses were supported by a detailed investigation of the first two generations, with an emphasis on the relationship between hydrogen bonding and the compactness and stability of the molecules; this allowed us to account for the generational evolution of hydrogen bonding that is experimentally observed in several poly(propylene imine) dendrimers.     

Complete 1H and 13C NMR assignments for two new monodesmoside saponins from Pentaclethra macroloba (Willd.) Kuntze

A detailed NMR study and full assignments of the 1H and 13C spectral data for two novel triterpenoid saponins isolated from the stem bark of Pentaclethra macroloba (Willd.) Kuntze are described. Their structures were established using a combination of 1D and 2D NMR techniques including 1H,1H-COSY, TOCSY, NOESY, gs-HMQC and gs-HMBC, and also electrospray ionization mass spectrometry and chemical methods. The structures were established as 3beta-O-([O-beta-D-glucopyranosyl-(1-->2)-O-beta-D-glucopyranosyl-(1-->4)-O-beta-D-glucopyranosyl-(1-->3)-O-alpha-L-rhamnopyranosyl-(1-->2)]-[O-beta-D-glucopyranosyl-(1-->3)-O-beta-D-glucopyranosyl-(1-->4)])-alpha-L-arabinopyranosylhederagenin (1) and 3beta-O-)[O-beta-D-glucopyranosyl-(1-->2)-O-beta-D-glucopyranosyl-(1-->4)-O-beta-D-glucopyranosyl-(1-->3)-O-alpha-L-rhamnopyranosyl-(1-->2)]-[O-beta-D-glucopyranosyl-(1-->3)-O-beta-D-glucopyranosyl-(1-->4)])-alpha-L-arabinopyranosyloleanolic acid (2).     

Dielectronic recombination of lithium-like Ar15+

Dielectronic recombination (DR) of Ar¹⁵⁺(1s ²2s) ions was studied in a single-pass merged-beams experiment at the UNILAC (universal linear accelerator) of GSI. Absolute recombination rates and cross sections were measured for electron-ion center-of-mass energies from 0 to 580 eV. A number of Rydberg states formed by DR with 2s → 2p (Δn=0) and 2s → 3? (Δn=1) core excitations and even individual terms in the 1s ²3?3?′ configuration could be resolved. Theoretical calculations of DR cross sections are in good overall agreement with the data. In the calculations for Δn=0 transitions, effects of electric fields have to be included to reproduce the magnitude of the measured DR rates at the limit of the 2 _{p 1/2}? and 2 _{p 3/2}? Rydberg series. Discrepancies between theory and experiment are observed at the series limits of the (1s ²3?n?′) Rydberg series.     

Self-assembly of electron donor-acceptor dyads into ordered architectures in two and three dimensions: surface patterning and columnar "double cables"

We report the synthesis and characterization of covalent dyads and multiads of electron acceptors (A) and donors (D), with the purpose of exploiting their nanophase separation behavior toward (a) two-dimensional (2D) surface patterning with well-defined integrated arrays of dissimilar molecular electronic features and (b) bulk self-assembly to noncovalent columnar versions of the so-called "double cable" systems, the likes of which could eventually provide side-by-side percolation pathways for electrons and holes in solar cells. Soluble, alkylated hexa-peri-hexabenzocoronenes (HBCs) bearing tethered anthraquinones (AQs) are shown by scanning tunneling microscopy (STM) to self-assemble at the solution-graphite interface into either defect-rich polycrystalline monolayers or extended 2D crystalline domains, depending on the number of tethered AQs. In the bulk, the thermal stability of the room-temperature HBC columnar phase is increased, which is attributed to the desired nanotriphase separation of HBC columns, insulating alkyl sheaths, and AQ units. Homeotropic alignment (columns normal to surfaces), predicted to be ideal for potential exploitation of such "double cables" in photovoltaic devices, is demonstrated.     

Dynamics of end-grafted polystyrene brushes in theta solvents

The dynamics of the concentration fluctuations in end-grafted polystyrene brushes in a theta solvent (cyclohexane) are probed by evanescent wave dynamic light scattering at different wavevectors q and temperatures. When the solvent quality changes from marginal to poor, the relaxation function C(q, t) exhibits strong effects as compared with the smooth variation of the brush density profile. From a single exponential above 50 °C, C(q, t) becomes a two-step decay function. The fast decay is still assigned to the cooperative diffusion albeit slower than in the good solvent regime whereas the slow nonexponential and nondiffusive process might relate to microsegragated and/or chain dynamics in the present polydisperse brush. The relaxation function of the present three brushes with different grafting density reveals similarities and disparities between wet brushes and semidilute polymer solutions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3590–3597, 2006     

HPLC Method for Determination of Rosiglitazone in Plasma

A fast and sensitive high performance liquid chromatography method for quantitative determination of rosiglitazone in human plasma has been developed. The extraction from plasma was performed using solid-phase extraction (SPE) on C4 silica (100 mg) disposable extraction cartridges (DEC). The separation of rosiglitazone and two metabolites was achieved on a Phenomenex® Synergi 4 µm MAX-RP (150 × 4.6 mm) column, protected by a guard column. The mobile phase was 0.01 M ammonium acetate, pH 7.0 - acetonitrile (65:35, v/v). (3S)-3-OH-quinidine was used as internal standard. The analytes were detected using fluorescence detection. The method was validated. The limit of quantitation was 1 ng mL⁻¹ and the detection limit was 0.25 ng mL⁻¹ for rosiglitazone in human plasma. The recovery was 90% for rosiglitazone. Linearity was observed over a range of 1-1000 ng mL⁻¹ (r²=0.9959). The intra- and inter-day precision (C.V.) did not exceed 8.7 %. Applicability of the method was demonstrated by a clinical pharmacokinetic study. A healthy volunteer received in two separate phases 4 mg and 8 mg rosiglitazone maleate as a single oral dose. Plasma concentrations were measured for 24 h in both phases.     

Stereoselective hydroxylation of an achiral cyclopentanecarboxylic acid derivative using engineered P450s BM-3

Substrate engineered, achiral carboxylic acid derivative was biohydroxylated with various mutants of cytochrome P450 BM-3 to give two out of the four possible diastereoisomers in high de and ee. The BM-3 mutants exhibit up to 9200 total turnovers for hydroxylation of the engineered substrate, which without the protecting group is not transformed by this enzyme.