Reaktive E = C(p-p)π-Systeme. XLII [1]. Neue Koordinationsverbindungen des 2-(Diisopropylamino)-1-phosphaethins: [{η4-(iPr2NCP)2}Ni{η2-(iPr2NCP)}], [(Ph3P)2Pt{η2-(iPr2NCP)}] und [Co2(CO)6{η2-η2-(iPr2NCP)}]

Reactive E = C(pp)π-Systems. XLII [1]. Novel Coordination Compounds of 2-(Diisopropylamino)-1-phosphaethyne: [{η⁴-(iPr₂NCP)₂}Ni{η²-(iPr₂NCP)}], [(Ph₃P)₂Pt{η²-(iPr₂NCP)}], and [Co₂(CO)₆{η²-μ²-(iPr₂NCP)}] 2-(Diisopropylamino)-phosphaethyne iPr₂N? C?P ( 2 ) reacts with the Ni(0)-complexes [Ni(1,5-cyclooctadiene)₂] and [Ni(CO)₃(1-azabicyclo[2.2.2]octane)], respectively, to give the novel complex [{η⁴-(iPr₂NCP)₂}Ni{η²-(iPr₂NCP)}] ( 5 ), with the 1,3-diphosphacyclobutadiene derivative and 2 (side-on) as π-ligands. The molecular structure of 5 determined by X-ray diffraction on single crystals proves the spin systems and rotational barriers deduced from NMR-data (¹H, ¹³C-, ³¹P). The PC distances of the four-membered ring of 1.817(2) and 1.818(2) Å – as expected – are considerably longer than the PC bond of the η²-coordinated phosphaalkyne 2 [1.671(2) Å]. – In the reactions of 2 with [(Ph₃P)₂Pt(C₂H₄)] or [Co₂(CO)₈] the ligand properties of 2 resemble those of alkynes affording the complexes [(Ph₃P)₂Pt{η²-(iPr₂NCP)}] ( 7 ) with side-on coordinated 2 and [Co₂(CO)₆{η²-μ²-(iPr₂NCP)}] with 2 acting as a 4e donor bridge in quantitative yield. In attempts to prepare copper(I) complexes of the aminophosphaalkyne 2 by reaction with CuCl or CuI the only isolable product formed in reasonable amounts under the influence of air and moisture is the 1 λ³, 3 λ⁵-diphosphetene (iPr₂N) ( 10 ) (isolated yield: ca. 20%). The crystal structure analysis of 10 indicates a strong structural relationship to the diamino-2-phosphaallyl cation [Me(iPr₂N)]⁺ ( 12 ), the 1,3-diphosphacyclobutadiene ligand (iPr₂NCP)₂ in the binuclear complex [{η¹, μ²-(iPr₂NCP)₂}Ni₂(CO)₆] ( 3a ) as well as to the heterocycles (dme)₂LiOE₂′ (E′ = S, 11a ; E′ = Se, 11b ) prepared by Becker et al. [11b, 35].     

Gas-Phase cationization and protonation of neutrals generated by matrix-assisted laser desorption

The ionization mechanisms involved in matrix-assisted ultraviolet laser desorption/ionization (MALDI) were studied with a time-of-flight mass spectrometer. When protonated or cationized quasimolecular ions generated by MALDI are not extracted promptly, their abundance is a function of the delay time between laser irradiation and ion extraction, maximizing at an optimum delay time (DTM) of a few hundred nanoseconds. The ion abundance at DTM exceeds that of prompt extraction by a factor of 2 or more. Increasing the cation density near the sample surface reduces the DTM, whereas increasing the desorption laser irradiance has the opposite effect. The enhancement suggests extensive gas-phase ion-molecule reactions after irradiation by the desorption laser has ceased.     

Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques

The mechanical properties of hybrid materials consisting of polystyrene (PS), which was cross-linked with different proportions of the multifunctional cluster Zr₆O₄(OH)₄(methacrylate)₁₂ (Zr6) were investigated. With the help of (micro)indentation and scratch testing, the influence of the Zr6 clusters on mechanical properties, such as hardness, stiffness, creep, craze initiation, and scratch resistance was shown. There was only a slight increase in hardness and in indentation modulus with higher cluster loadings. While this observation was in agreement with the compression behaviour of the materials, the tensile properties showed a much stronger dependence on the Zr6 content. With increasing cluster loading, an increase of craze initiation stress, as determined by ball indentation experiments, was found. Performing scratch testing with constant load, a reduction of pile-up and a stronger recovery were observed for the hybrid materials compared to the neat PS. Scratch tests with a constant increase of load showed an increase of the critical load for crack opening during scratching.     

Propene polymerization using homogeneous MAO-activated metallocene catalysts: Me2Si(Benz[e]Indenyl)2ZrCl2/MAO vs. Me2Si(2-Me-Benz[e]Indenyl)2ZrCl2/MAO

Propene was polymerized at 40°C and 2-bar propene in toluene using methylalumoxane (MAO) activated rac-Me₂Si(Benz[e]Indenyl)₂ZrCl₂ ( BI ) and rac-Me₂Si(2-Me-Benz[e]Indenyl)₂ZrCl₂ ( MBI ). Catalyst BI /MAO polymerizes propene with high activity to afford low molecular weight polypropylene, whereas MBI /MAO is less active and produces high molecular weight polypropylene. Variation of reaction conditions such as propene concentration, temperature, concentration of catalyst components, and addition of hydrogen reveals that the lower molecular weight polypropylene produced with BI /MAO results from chain transfer to propene monomer following a 2,1-insertion. A large fraction of both metallocene catalyst systems is deactivated upon 2,1-insertion. Such dormant sites can be reactivated by H₂-addition, which affords active metallocene hydrides. This effect of H₂-addition is reflected by a decreasing content of head-to-head enchainment and the formation of polypropylene with n-butyl end groups. Both catalysts show a strong dependence of activity on propene concentration that indicates a formal reaction order of 1.7 with respect to propene. MBI /MAO shows a much higher dependence of the activity on temperature than BI /MAO. At elevated temperatures, MBI /MAO polymerizes propene faster than BI /MAO. © 1995 John Wiley & Sons, Inc.     

The Elusive beta-unsubstituted calix[5]pyrrole finally captured

[reaction: see text] The meso-decamethyl-calix[5]pyrrole 2b was synthesized from the furan-based analogue 1b via the homologation of the furan rings to pyrrole, and its solid-state structure was determined by X-ray crystallography: surprisingly, the binding constant of 2b toward chloride is found to be lower than that of the tetrameric analogue 2a.     

1,4-dimethyl-3,6-dioxo-1,2,4,5-tetrazin-1-IUM-5(4h)-id,a new six-membered heterocyclic betaine

The preparation, the spectroscopic characterization, the crystal structure and chemical reactions of the new six-membered heterocyclic betaine2 are reported; 2 is a representative of a possibly large group of yet unkonwn betaines of the general structure 8.     

The Adamantane Rearrangement of 1,2endo-Trimethylenenorbornane. Preliminary communication

1,2endo-Trimethylenenorbornane (1) in the presence of aluminium bromide in carbon disulfide at ?60° isomerizes at a much higher rate than its 2exo-isomer 2 to 2endo, 6endo-trimethylenenorbornane (3) as the sole product. By consequence, the hydrocarbon 2 being the next intermediate in the sequence of the adamantane rearrangement of 1 seems to be very unlikely.     

1D and 2D Systems Derived from Polynuclear [ ML(N 3) 2] n ( M?=?Zn(II) or Cd(II) and L is 2-Picoline- N-oxide or 4-Methylpyrimidine)

Four new polynuclear complexes: [Zn(2picNO)(N₃)₂]_n, [Zn(4Mepym)(N₃)₂]_n, [Cd(2picNO)(N₃)₂]_n, and [Cd(4Mepym)(N₃)₂]_n (2picNO=2-picoline-N-oxide and 4Mepym=4-methylpyrimidine) have been synthesized and characterized by single-crystal X-ray diffraction. The structures of the zinc(II) complexes feature five-coordinate zinc atoms, (-1,1) azido bridges, monodentate organic ligands, and 1D chains. The cadmium(II) azide complexes contain distorted octahedral metal atoms linked by alternate di-(-1,1) and di-(-1,3) azido bridges in cis arrangement and these chains are connected by 2picNO bridges giving a honeycomb 2D framework or by 4Mepym bridges forming extended 2D network structure.     

Structural studies of transition metal complexes with 4,5-bis(2-pyridylmethylsulfanyl)-4',5'-ethylenedithiotetrathiafulvalene: probing their potential for the construction of multifunctional molecular assemblies

Three divalent transition metal complexes of 4,5-bis(2-pyridylmethylsulfanyl)-4',5'-ethylenedithiotetrathiafulvalene have been prepared and crystallographically characterized. The isostructural Co(II) and the Ni(II) complexes show octahedral geometries around the metal ions with the coordination sites occupied by the pyridyl nitrogen atoms and the thioether sulfur atoms of the ligand and cis coordination of the halide ions. Cyclic voltammetry reveals that the complexation leads to a small anodic shift in the first oxidation potential of the TTF system.     

Organotransition-Metal Metallacarboranes. 46. Multidecker Sandwiches of the Cobalt Group Metals(,)(1)

The double-decker sandwich complex CpIr(2,3-Et(2)C(2)B(4)H(4)) (1a) was prepared via deprotonation of nido-2,3-Et(2)C(2)B(4)H(6) to its mono- or dianion and reaction with (CpIrCl(2))(2) in THF and isolated as a colorless air-stable solid; the B(4)-chloro derivative 1b was also obtained. Decapitation of 1a and 1b with TMEDA afforded colorless nido-CpIr(2,3-Et(2)C(2)B(3)H(5)) (2a) and its 4-chloro derivative 2b. Chlorination of 1a by Cl(2) or N-chlorosuccinimide gave the symmetrical species CpIr(2,3-Et(2)C(2)B(4)H(3)-5-Cl) (1c), which was decapped to yield nido-CpIr(2,3-Et(2)C(2)B(3)H(4)-5-Cl) (2c). The triple-decker complexes CpIr(2,3-Et(2)C(2)B(3)H(2)-4[6]-Cl)IrCp (3), an orange solid, and dark green CpIr(2,3-Et(2)C(2)B(3)H(2)-4[6]-Cl)CoCp (5) were prepared from 2a and nido-CpCo(2,3-Et(2)C(2)B(3)H(5)) (4a), respectively, by deprotonation and reaction with (CpIrCl(2))(2) in THF. Reaction of the 2c(-) anion with Rh(MeCN)(3)Cl(3) gave the dark green tetradecker complex [CpIr(Et(2)C(2)B(3)H(2)-5-Cl)](2)RhH (6). In an attempt to prepare a heterotrimetallic Co-Rh-Ir tetradecker sandwich, a three-way reaction involving the deprotonated anions derived from CpCo(2,3-Et(2)C(2)B(3)H(4)-5-Cl) (4b) and 2c with Rh(MeCN)(3)Cl(3) was conducted. The desired species CpCo(Et(2)C(2)B(3)H(2)Cl)RhH(Et(2)C(2)B(3)H(2)Cl)IrCp (7) and the tetradeckers [CpCo(Et(2)C(2)B(3)H(2)Cl)](2)RhH (8) and 6 were isolated in small quantities from the product mixture; many other apparent triple-decker and tetradecker products were detected via mass spectroscopy but were not characterized. All new compounds were isolated via column or plate chromatography and characterized via NMR, UV-visible, and mass spectroscopy and by X-ray crystal structure determinations of 1a and 3. Crystal data for 1a: space group C2/c; a = 28.890(5) ?, b = 8.511(2) ?, c = 15.698(4) ?, beta = 107.61(2) degrees; Z = 8; R = 0.049 for 1404 independent reflections having I > 3sigma(I). Crystal data for 3: space group P2(1)/c; a = 11.775(4) ?, b = 15.546(5) ?, c = 15.500(5) ?, beta = 103.16(3) degrees; Z = 4; R = 0.066 for 2635 independent reflections having I > 3sigma(I).