Structural analysis of Cryptosporidium parvum.

Cryptosporidium parvum (Apicomplexa, formerly Sporozoa) is the causative agent of cryptosporidiosis, an enteric disease of substantial medical and veterinary importance. C. parvum shows a number of unique features that differ from the rest of the class of coccidea in which it is currently grouped taxonomically. Differences occur in the overall structure of the transmission form and the invasive stages of the parasite, its intracellular location, the presence of recently described additional extracellular stages, the host range and target cell tropism, the ability to autoinfection, the nonresponsiveness to anticoccidial drugs, the immune response of the host, and immunochemical and genetic characteristics. These differences have an important impact on the infectivity, the epidemiology, the therapy, and the taxonomy of the parasite. The present article describes the structural analysis of the parasite using light and electron microscopy with an emphasis on structural details unique to C. parvum.     

AES investigations of the iron surface composition after laser irradiation under atmospheric conditions

The laser induced modification of iron surfaces with atmospheric species was investigated by means of Auger electron spectroscopy (AES) and scanning electron microscopy (SEM). Different laser systems were used for irradiating iron samples in a wide range of the laser processing parameters up to small foci and ultra short pulses.A nitriding of iron connected with an oxidation of the near surface region was observed in the wavelength range between 193 nm and 10.6 m using large foci (0.1 cm²) and short pulses (10...1400ns). In case of small foci (7·10^–6cm²) with ns-pulses (50 ns) an enrichment of the iron melt with nitrogen and an advanced oxidation of the surrounding area of the laser spot were detected. When using shorter pulses (200 fs, 40 ps) no indications for a nitriding were found.     

Phase diagram of softly repulsive systems: the Gaussian and inverse-power-law potentials

We redraw, using state-of-the-art methods for free-energy calculations, the phase diagrams of two reference models for the liquid state: the Gaussian and inverse-power-law repulsive potentials. Notwithstanding the different behaviors of the two potentials for vanishing interparticle distances, their thermodynamic properties are similar in a range of densities and temperatures, being ruled by the competition between the body-centered-cubic (bcc) and face-centered-cubic (fcc) crystalline structures and the fluid phase. We confirm the existence of a reentrant bcc phase in the phase diagram of the Gaussian-core model, just above the triple point. We also trace the bcc-fcc coexistence line of the inverse-power-law model as a function of the power exponent n and relate the common features in the phase diagrams of such systems to the softness degree of the interaction.     

Volatile fraction of lavender and bitter fennel infusion extracts

The relative proportions of chemical classes (hydrocarbons, oxides, alcohols/ethers, aldehydes/ketones, acids/esters/lactones) in the essential oil of lavender (Lavendula angustifolia Mill., family Lamiaceae) and bitter fennel (Foeniculum vulgare Mill. subsp. vulgare var. vulgare (Mill.) Thellung, family Apiaceae) and in the volatile fraction of infusion extracts were examined and showed remarkable differences. The volatile compounds of infusions were isolated by hydrodistillation and solid phase extraction (SPE). Their qualitative and semiquantitative compositions were compared with the essential oil isolated by hydrodistillation directly from the plant material and analyzed by GC-MS. Furthermore, quantification of the major constituents of lavender oil and of the volatile fraction obtained by hydrodistillation of the infusion was performed. Comparison of the total essential oil yield quantified by hydrodistillation of the lavender infusion (0.7% v/w, corresponding to plant material) with the essential oil yield of the blossoms (5.1% v/w) revealed that only 13.9% of the initial oil could be extracted by infusion. The main constituents of the volatile fraction of the lavender infusion were (hydrodistillation/SPE): linalool (39.3%/28.2%), 1,8 cineole (24.8%/18.9%), cis-linalool oxide (furanoid) (5.8%/8.0%), trans-linalool oxide (furanoid) (4.1%/7.1%), camphor (5.3%/4.0%) and alpha-terpineol (4.0%/3.0%). The major constituents of lavender essential oil were linalool (28.8%), 1,8-cineole (18.05%), linalyl acetate (13.9%) and alpha-terpineol (4.0%). Most intriguing, in the volatile fraction of lavender infusion a significant proportional decrease of linalyl acetate and an increase of linalool oxides was recognized. The essential oil yield of fennel fruits was 12.5% v/w, whereas 1.8% v/w volatile fraction (corresponding to plant material) was obtained by hydrodistillation of the fennel infusion, which is equivalent to 14.5% of the initial fennel essential oil. The main constituents of the volatile fraction of the fennel infusion were (hydrodistillation/SPE): trans-anethole (56.4%/54.8%), fenchone (36.2%/39.5%) and estragole (2.5%/2.2%), which were also the major compounds of the genuine bitter fennel essential oil. In infusions, the proportion of ethers vs. ketones was shifted significantly towards a higher proportion of the latter compared with the essential oil obtained from the fruits.     

Modifications of boronic ester pro-chelators triggered by hydrogen peroxide tune reactivity to inhibit metal-promoted oxidative stress

Several new analogs of salicylaldehyde isonicotinoyl hydrazone (SIH) and salicylaldehyde benzoyl hydrazone (SBH) that contain an aryl boronic ester (BSIH, BSBH) or acid (BASIH) in place of an aryl hydroxide have been synthesized and characterized as masked metal ion chelators. These pro-chelators show negligible interaction with iron(III), although the boronic acid versions exhibit some interaction with copper(II), zinc(II) and nickel(II). Hydrogen peroxide oxidizes the aryl boronate to phenol, thus converting the pro-chelators to tridentate ligands with high affinity metal binding properties. An X-ray crystal structure of a bis-ligated iron(III) complex, [Fe(SBH(m-OMe)(3))(2)]NO(3), confirms the meridonal binding mode of these ligands. Modifications of the aroyl ring of the chelators tune their iron affinity, whereas modifications on the boron-containing ring of the pro-chelators attenuate their reaction rates with hydrogen peroxide. Thus, the methoxy derivative pro-chelator (p-OMe)BASIH reacts with hydrogen peroxide nearly 5 times faster than the chloro derivative (m-Cl)BASIH. Both the rate of pro-chelator to chelator conversion as well as the metal binding affinity of the chelator influence the overall ability of these molecules to inhibit hydroxyl radical formation catalyzed by iron or copper in the presence of hydrogen peroxide and ascorbic acid. This pro-chelator strategy has the potential to improve the efficacy of medicinal chelators for inhibiting metal-promoted oxidative stress.     

A pyrazolate-supported Fe(3)(mu(3)-O) core: structural, spectroscopic, electrochemical, and magnetic study

A comparison is made between the structural, spectroscopic, electrochemical, and magnetic properties of pyrazolate versus carboxylate complexes [Fe3(mu3(mu3O)(mu-LL)6Cl3]2- containing the Fe3(mu3-O)-motif. While the Fe3(mu3-O)-cores are structurally indistinguishable in the two types of complexes, their magnetic properties deviate from the expected values as a result of a through-pyrazole contribution to the overall antiferromagnetic exchange with J1/hc = -80.1 cm(-1) and J2/hc = -72.4 cm(-1), or J1/hc = 70.6 cm(-1) and J2/hc = -80.8 cm(-1), (Hex = -J1(S1S2 + S2S3) - J2S1S3). The magnetic properties of the pyrazolate complexes are further tuned by an antisymmetric exchange interaction term.     

A Tin Analogue of Carbenoid: Isolation and Reactivity of a Lithium Bis(imidazolin‐2‐imino)stannylenoid

The lithium bis(imino)stannylenoid (NIPr)₂Sn(Li)Cl ( 1 ; NIPr=bis(2,6‐diisopropylphenyl)imidazolin‐2‐imino) was prepared by the reaction of LiNIPr with 0.5 equiv of SnCl₂?diox (diox=1,4‐dioxane) and the ambiphilic character of the compound was demonstrated by investigations into its reactivity. Treatment of 1 with I₂ or MeI yielded the oxidative addition products (NIPr)₂SnI₂ and (NIPr)₂Sn(Me)I, respectively. In contrast, the reaction of 1 with one equivalent of Me₃SiCl resulted in the formation of Me₃SiNIPr and the chlorostannylene dimer [NIPrSnCl]₂. Moreover, the substitution reaction of compound 1 with MeLi led to the formation of the methyl‐substituted stannate (NIPr)₂Sn(Li)Me.     

Synthesis of Structurally Varied 1,3‐Disiloxanediols and Their Activity as Anion‐Binding Catalysts

A series of new 1,3‐disiloxanediols has been synthesized, including naphthyl‐substituted and unsymmetrical siloxanes, and demonstrated as a new class of anion‐binding catalysts. In the absence of anions, diffusion‐ordered spectroscopy (DOSY) displays self‐association of 1,3‐disiloxanediols through hydrogen‐bonding interactions. Binding constants determined for 1,3‐disiloxanediol catalysts indicate strong hydrogen‐bonding and anion‐binding abilities with unsymmetrical siloxanes displaying different hydrogen‐bonding abilities for each silanol group.     

Fractionation factors for stable isotopes of N and O during N2O reduction in soil depend on reaction rate constant

Nitrous oxide (N(2)O) is a major greenhouse gas that is mainly produced but also reduced by microorganisms in soils. We determined factors for N and O isotope fractionation during the reduction of N(2)O to N(2) in soil in a flow-through incubation experiment. The absolute value of the fractionation factors decreased with increasing reaction rate constant. Reaction rates constants ranged from 1.7 10(-4) s(-1) to 4.5 10(-3) s(-1). The minimum, maximum and median of the observed fractionation factors were for N -36.0 per thousand, -1.0 per thousand and -9.3 per thousand and for O -74.0 per thousand, -6.9 per thousand and -26.3 per thousand, respectively. The ratio of O isotope fractionation to N isotope fractionation was 2.4 +/- 0.3 and it was independent from the reaction rate constants. This leads us to conclude that fractionation factors are variables while their ratio in this particular reaction might be a constant.     

Accreditation of reference material producers: the example of IRMM's Reference Materials Unit

The potential approaches for third-party assessment of reference material producers are revisited and the activities of the Reference Materials (RM) Unit of the Institute for Reference Materials and Measurements (IRMM) to obtain accreditation to ISO Guide 34 and ISO 17025 are described. Accreditation was related to the Unit as all matrix RM activities of the institute are concentrated there. A management system was established that allows sufficient flexibility to be applicable to a wide range of RMs while being precise enough to ensure compliance with ISO Guides 30, 31 and especially 34 and 35. Accreditation was achieved in 2004 with independent scopes for testing and RM production and was confirmed and extended in 2005. The key aspects of the RM Unit's management system for RM production are presented. Presented at BERM-10, April 2006, Charleston, SC, USA