Diode-pumped passively mode-locked Nd:YAG laser with 10-W average power in a diffraction-limited beam

We present a passively mode-locked Nd:YAG laser with 10.7-W average output power in a diffraction-limited beam. Stable self-starting mode locking with a pulse duration of 16 ps and a pulse energy of 120 nJ is obtained with a semiconductor saturable-absorber mirror. The laser is directly side pumped with two 20-W diode bars. Single-pass frequency doubling in an external 5-mm-thick KTP crystal yields 3.2-W average power at 532 nm.     

Directly diode-pumped millijoule subpicosecond Yb:glass regenerative amplifier

An Yb:glass regenerative amplifier directly side pumped by four 20-W diodes is demonstrated. By use of a novel pumping scheme and introduction of cylindrical optics into the cavity, a free-running average output power as great as 4 W with a TEM(00) -like mode was achieved from the bare cavity, with a 0.56 pump duty cycle. When the regenerative amplifier injected, 1-mJ 200-fs FWHM pulses were obtained following compression by use of 2-ms pump pulses and up to a 150-Hz repetition rate.     

Interlayer pairing in high temperature superconductors: effect of nonmagnetic impurities

The influence of impurity scattering is studied theoretically in a two-layer model for the high-T _c superconductor Y₁Ba₂Cu₃O_7– with intra- and inter-layer pairing. Two types of impurities are considered: (I) impurities which conserve the reflection symmetry of the two layers and (II) impurities which break it. Impurities of type (I) have no influence on the critical temperature. Type (II) impurities have strong influence onT _c as well as onH _c2 if there is a pairing interaction between carriers of different layers. The treatment of type (II) impurities is generalized to a periodic layer model appropriate for La_2–x Ba _x CuO₄. Available experiments on impurities in Y₁Ba₂Cu₃O_7– and La_2–x Ba _x CuO₄ are interpreted with our theory.     

The mechanism of sonochemical degradation of a cationic surfactant in aqueous solution

The sonochemical degradation of the cationic surfactant, laurylpyridinium chloride (LPC), in water was studied at concentrations of 0.1-0.6 mM, all below its critical micelle concentration (15 mM). It has been found that the initial step in the degradation of LPC occurs primarily by a pyrolysis pathway. Chemical analysis of sonicated solutions by gas chromatography, electrospray mass spectrometry, and high performance liquid chromatography reveals that a broad range of decomposition products, hydrocarbon gases and water-soluble species, are produced. Propionamide and acetamide were identified as two of the degradation intermediates and probably formed as the result of the opening of the pyridinium ring following OH radical addition. Most of the LPC is eventually converted into carboxylic acids. The complete mineralization of these carboxylic acids by sonolysis is however a comparatively slow process due to the hydrophilic nature of these low molecular weight products.     

Hard X‐ray phase‐contrast tomography of non‐homogeneous specimens: grating interferometry versus propagation‐based imaging

X‐ray phase‐contrast imaging is an effective approach to drastically increase the contrast and sensitivity of microtomographic techniques. Numerous approaches to depict the real part of the complex‐valued refractive index of a specimen are nowadays available. A comparative study using experimental data from grating‐based interferometry and propagation‐based phase contrast combined with single‐distance phase retrieval applied to a non‐homogeneous sample is presented (acquired at beamline ID19‐ESRF). It is shown that grating‐based interferometry can handle density gradients in a superior manner. The study underlines the complementarity of the two techniques for practical applications.     

Characterization of high-order harmonic radiation on femtosecond and attosecond time scales

We characterize the temporal structure of high-order harmonic radiation on both the femtosecond and attosecond time scales. The harmonic emission is characterized by mixed-color two-photon ionization with an infrared femtosecond laser using a Mach–Zehnder interferometer where both pump and probe arms travel completely separate paths. In a first experiment, we measure the duration and chirp of individual harmonics. In a second experiment, we resolve, for the first time with this type of setup, the attosecond beating of several harmonics generated under conditions similar to the first experiment. We suggest that the results of both measurements can be combined to determine the full attosecond time structure of the harmonic emission. PACS 32.80.Rm; 42.65.Ky     

Generation of intense,carrier-envelope phase-locked few-cycle laser pulses through filamentation

Intense, well-controlled light pulses with only a few optical cycles start to play a crucial role in many fields of physics, such as attosecond science. We present an extremely simple and robust technique to generate such carrier-envelope offset (CEO) phase locked few-cycle pulses, relying on self-guiding of intense 43-fs, 0.84 mJ optical pulses during propagation in a transparent noble gas. We have demonstrated 5.7-fs, 0.38 mJ pulses with an excellent spatial beam profile and discuss the potential for much shorter pulses. Numerical simulations confirm that filamentation is the mechanism responsible for pulse shortening. The method is widely applicable and much less sensitive to experimental conditions such as beam alignment, input pulse duration or gas pressure as compared to gas-filled hollow fibers. PACS 45.65.Ky; 42.65.Re     

Shock-wave velocity of a femtosecond-laser-produced plasma

Fluorescence measurements have been used to characterize the velocity of atoms in a femtosecond-laser-produced plasma. Nanogram amounts of a copper sample were ablated by the focused radiation (λ=775 nm) of an all-solid-state laser. The laser was operated at a pulse rate of 10 Hz with an energy of 200μJ per pulse. The microplasma expanded into a defined argon atmosphere of pressures between 0.02 and 850 mbar. Atomic fluorescence was excited in the laser plume by a dye-laser pulse with the wavelength set to the line Cu I 282.4 nm. The narrowed beam of the dye-laser was directed into the plasma at different heights above the sample surface. The fluorescence radiation was measured with an échelle-spectrometer, equipped with an intensified-charge-coupled device as the detector. The velocity depends strongly on the pressure of the ambient atmosphere and the distance from the sample surface. The highest velocity found at an argon pressure of 0.02 mbar was 1.0×10⁶ cm s⁻¹.     

Iterative regularization methods for atmospheric remote sensing

In this paper we present different inversion algorithms for nonlinear ill-posed problems arising in atmosphere remote sensing. The proposed methods are Landweber's method (LwM), the iteratively regularized Gauss-Newton method, and the conventional and regularizing Levenberg-Marquardt method. In addition, some accelerated LwMs and a technique for smoothing the Levenberg-Marquardt solution are proposed. The numerical performance of the methods is studied by means of simulations. Results are presented for an inverse problem in atmospheric remote sensing, i.e., temperature sounding with an airborne uplooking high-resolution far-infrared spectrometer.