Light-dependent Oxygen Consumption in Bacteriochlorophyll-Serine-treated Melanoma Tumors: On-line Determination Using a Tissue-inserted Oxygen Microsensor

Successful application of anticancer therapy, and especially photodynamic therapy (PDT) mediated by type II (PDTII) processes, depends on the oxygen content within the tumor before, during and after treatment. The high consumption of oxygen during type II PDT imposes constraints on therapy strategies. Although rates of oxygen consumption and repletion during PDTII were suggested by theoretical studies, direct measurements have not been reported. Application of a novel oxygen sensor allowed continuous and direct in situ measurements (up to a depth of 8–9 mm from the tumor surface and for several hours) of temporal variations in the oxygen partial pressure (pO₂) during PDT. Highly pigmented M2R mouse melanoma tumors implanted in CD1 nude mice were treated with bacteriochlorophyll-serine (Bchl-Ser; a new photodynamic reagent) and were subjected to fractionated illumination (700 < λ. < 900 nm) at a fluence rate of 12 mW cm^-2. This illumination led to total oxygen depletion with an average consumption rate of 7.2 uAf(O₂) s^-1. Spontaneous reoxygenation (at an average rate of 2.5 µM(O₂)/s) was observed during the following dark period. These rates are in good agreement with theoretical considerations (Foster et al., Radiat. Res. 126, 296,1991 and Henning et al, Radiat. Res. 142, 221, 1995). The observed patterns of oxygen consumption and recovery during prolonged periods of light/dark cycles were interpreted in terms of vasculature damage and sensitizer clearance. The presented data support the previously suggested advantages of fractionated illumination for type II photodynamic processes.     

Effect of humidity on the supramolecular structure of cotton, studied by quantitative spin probing

The effect of water content on the physicochemical properties of the amorphous regions in cotton were investigated by measuring the electron paramagnetic resonance (EPR) of TEMPOL nitroxide radicals, deposited in cotton at different loadings, as a function of the relative humidity (RH) and temperature. Three different components contribute differently to the experimental EPR spectra, corresponding to (a) mobile radicals absorbed in the bulk amorphous region, (b) slow moving radicals adsorbed on the crystallite surfaces in cotton, and (c) aggregated radicals. These components were analyzed by means of computer-aided simulations of the line shapes and simplified line width methods. Polarity and mobility parameters were extracted from the analysis of the spectra. For all loadings and temperatures, the polarity suddenly dropped when the water content fell below approximately 3 wt %, i.e., when water was removed from the bulk amorphous regions. At the lowest loading (2 x 10(-5) mol kg(-1)), the spectra were independent of the RH, and only mobile radicals were observed. At intermediate loading (10(-4)-10(-3) mol kg(-1)) both mobile (fast) and adsorbed (slow) moving radicals were present, the fraction of which depended on the RH. The mobility of the adsorbed and mobile radical signals was smaller at higher loadings, indicating microdomains of different character. The temperature dependence of the rotational correlation times provided the activation energies, which were much lower than in liquids. An equilibrium exists between the mobile and the adsorbed radicals. The temperature dependence of the equilibrium constant, K, gave the enthalpy and the entropy of the adsorption process. At low RH, the enthalpy and the entropy values indicated a simple adsorption process. At 10(-3) mol kg(-1), the values were independent of the RH, but at low loadings the values increased with the increase in the RH, which suggested a displacement of adsorbed water by the radicals at high water content. At loadings above 10(-3) mol kg(-1), signals from radicals strongly interacting via spin exchange were observed, which are assigned to aggregated radicals; simulation of the spectra gave an activation energy of 13 kJ mol(-1) for the spin exchange process. These effects are rationalized on the basis of microdomains of different character within cotton, reflecting the variation in pore sizes (0.5-8 nm) and the relaxation behavior of the cellulose chains.     

High-frequency EPR study of reduced diruthenium and dirhenium polypyridine complexes based on the 1,2,4,5-tetrazine radical bridge

The radical complexes [(micro-L)[Ru(bpy)(2)](2)]*(3+), [(micro-bmtz)[Ru(cym)Cl](2)]*(+) and [(micro-L)[Re(CO)(3)Cl](2)]*(-), where L are 3,6-disubstituted 1,2,4,5-tetrazines such as 3,6-bis(2-pyrimidyl)-1,2,4,5-tetrazine (bmtz) and cym =p-cymene, were studied by X-band EPR in fluid solution and by 285 GHz EPR in glassy frozen solution. A comparison with other transition metal complexes (Cu, Rh, Os, Ir, Pt) involving tetrazine radical ligands reveals that the g anisotropy reflects (i) the pi acceptor effect of the tetrazine substituents, (ii) the competition from ancillary pi acceptor ligands for back donation from the metal, and (iii) the spin-orbit coupling contributions from the transition metal.     

Microwave-assisted synthesis of N,N'-diaryl cyanoguanidines

[reaction: see text] A mild, efficient, and high-yielding method for the synthesis of N,N'-diaryl cyanoguanidines from their corresponding thioureas under microwave-assisted conditions is described. A series of cyanoguanidines were synthesized containing both electron-donating and electron-withdrawing substituents. The reactions were facilitated by the use of polar solvents along with moderate temperatures.     

Iron‐Catalyzed Stereoselective Cross‐Coupling Reactions of Stereodefined Enol Carbamates with Grignard Reagents

A practical and highly stereoselective iron‐catalyzed cross‐coupling reaction of stereodefined enol carbamates and Grignard reagents to yield tri‐ and tetrasubstituted acrylates is reported. A facile method for the stereoselective generation of these enol carbamates has also been developed.     

Adams-Harbertson protein precipitation-based wine tannin method found invalid

The poor precision of the Adams-Harbertson wine tannin assay which was proposed for commercial winemaking, thereby creating the real possibility of quality control problems, is documented. The method is a version of the Hagerman and Butler protein precipitation-based tannin method. An extensive invalidation of the assay results with luxury wine data shows that the assay cannot distinguish bottled wine with reasonable accuracy. Five laboratories used Adams-Harbertson to assay 9 replicates each, of 3 bottled wines (n = 135) found in California supermarkets, with tannin concentrations of nominally 500 and 1000 ppm by high-performance liquid chromatography (HPLC). Reliability exceeded the +/-5% industry requirement by nominally 5 times (z-score based on 5% distribution). Coefficient of variation was +/-27%, making the standard deviation range 54% for Pinot Noir, 34% for Merlot, and 44% for Cabernet Sauvignon. Validity exceeded the 100% requirement. Intralaboratory validity recovery was 55-63%. Interwinery validity was 71-178% of the mean for Pinot Noir, 81-144% for Merlot, and 83-164% for Cabernet Sauvignon. Range as a function of the mean was 89% for Pinot Noir, 55% for Merlot, and 67% for Cabernet Sauvignon. Expect intermethod validity to be nominally 50%, i.e., percent recovery to HPLC. These statistically significant errors were predicted by the literature. First-order error is related to the tannin-protein equilibrium constant (Ka), as suggested by the original author, Hagerman, and the protein equivalence point error as suggested by Silber. This does not obviate second-order errors for tannin-protein analytical chemistry. Winemakers using the measurements risk making wines that are relatively more tannic than the measurements report.     

UN sustainable development goals: How can sustainable/green chemistry contribute? Green chemistry as a source of sustainable innovations in the cosmetic industry

Sustainable innovation is a key-objective for our Group that has recently integrated the principles of sustainable development into all stages of a product's life cycle, from its design to consumer use. The following ambitious commitment: 100% of its products should bring an environmental (or social benefit) by 2020, will be reached, in particular, by integrating and giving a constant privilege to renewable raw materials -or ingredients-that originate from sustainable resources that fully comply with the green chemistry rules. In this short review, integration of Green Chemistry principles by our Group, strategies to identify new performing ingredients through sustainable chemistry as well as illustrative examples of innovative raw materials will be presented. With regard to the crucial respect of the environment of our planet, sustainable chemistry has become an indispensable turning point for industrial groups highly devoted to innovation.     

Estimating a skein module with characters

We introduce a new technique for estimating the number of generators of the Kauffman bracket skein module of a three manifold; one which requires the construction of linear functionals on a simpler version of the module. Of particular interest is the use of representations of the fundamental group into to generate the functionals.

     

Separation of short and medium-chain fatty acids using capillary electrophoresis with indirect photometric detection: Part I: Identification of fatty acids in rat feces

Short and medium-chain fatty acids (SMCFAs) are known as essential metabolites found in gut microbiota that function as modulators in the development and progression of many inflammatory conditions as well as in the regulation of cell metabolism. Currently, there are few simple and low-cost analytical methods available for the determination of SMCFA. This report focuses on SMCFA analysis utilizing CE with indirect photometric detection (CE-IPD). A ribonucleotide electrolyte, 5’-adenosine mono-phosphate (5’-AMP), is investigated as an IPD reagent due to its high molar absorptivity and dynamic reserve compatible with separation and detection of SMCFA. The operating parameters like the composition of organic solvent, millimolar concentrations of the complexing agent (alpha-cyclodextrin), 5’-AMP and non-absorbing electrolyte (boric acid), as well as the applied voltage, are optimized for resolution, efficiency, and signal-to-noise ratio. A baseline resolution of all nine SMCFAs is achieved in less than 15 min. Additionally, the developed CE-IPD method shows promising potential to identifying SMCFA in rat fecal supernatant. The presented analytical assay is simple, economical, and has considerably good repeatability. The intraday and interday RSD of less than 1 and 2% for relative migration time, as well as less than 14 and 15% for peak area, respectively, were obtained for SMCFA in fecal solution.