Diorganogalliumfluoride. Die Kristallstruktur des Mischkristalls [B(CH2Ph)3]0,92[Ga(CH2Ph)3]0,08 · NCMe

Diorganogallium Fluorides. The Crystal Structure of the Mixed Crystal [B(CH₂Ph)₃]_0.92[Ga(CH₂Ph)₃]_0.08 · NCMe The reaction of GaR₃ with BF₃ · OEt₂ in diethylether leads to the diorganogallium fluorides R₂GaF [R = i-Pr ( 1 ), CH₂Ph ( 2 ), Mes ( 3 )]. Compound 1 is also available by the reaction of i-Pr₂GaBr ( 6 ) with KF at ?20°C in acetonitrile. The by-product B(CH₂Ph)₃, formed together with 2 during the first reaction, crystallizes with ca. 8% Ga(CH₂Ph)₃ in acetonitrile as [B(CH₂Ph)₃]_0.92[Ga(CH₂Ph)₃]_0.08 · NCMe ( 4 ) in the space group P2₁/n with a = 1050.32(7) pm, b = 1159.5(2) pm, c = 1591.6(1) pm and β = 96.931(6)°.     

Classifying wine according to geographical origin via quadrupole-based ICP–mass spectrometry measurements of boron isotope ratios

The potential of quadrupole-based ICP–MS as a tool for B-isotopic analysis of wines and its usefulness in provenance determinations were assessed. A precision of 0.1–0.25% RSD (corresponding to a relative standard deviation of the mean of three replicate measurements of 0.06–0.12%) was sufficient to establish small differences in the B isotope ratios in wines from different geographical origins. Each sample measurement was bracketed by measurements of a standard and mass bias drift correction made by interpolation. Sample preparation was kept to a minimum to avoid possible fractionation. Dilution of the wine samples by a factor of 100 with 0.65% HNO₃ was found to reduce matrix-induced mass discrimination substantially. Wines from three wine-producing regions, Stellenbosch, Robertson, and Swartland, in the Western Cape Province of South Africa, and wines from specific regions in France (Bergerac) and Italy (Valpolicella) were analyzed by ICP–QMS for their B-isotopic compositions. It was concluded that the ¹¹B/¹⁰B ratios can be used to characterize wines from different geographical origins. Average ¹¹B/¹⁰B ratios in red wines from South Africa (Stellenbosch), France (Bergerac), and Italy (Valpolicella) were found to differ by between 0.5 and 1.5%.     

Apparent two-dimensional behavior of TiO2 nanotubes revealed by light absorption and luminescence

Optical absorption and photoluminescence (PL) properties of colloidal TiO(2) nanotubes, produced by the alkali hydrothermal method, were studied at room temperature in the range 300-700 nm. Nanotubes having an internal diameter in the range 2.5-5 nm have very similar optical properties, in contrast to the expected behavior for quasi-1-D systems. This is explained by the complete thermal smearing of all 1-D effects, due to the large effective mass of charge carriers in TiO(2), resulting in an apparent 2-D behavior of TiO(2) nanotubes.     

Vesicle adsorption and lipid bilayer formation on glass studied by atomic force microscopy

The adsorption of phosphatidylcholine (PC) vesicles (30, 50, and 100 nm nominal diameters) and of dye-labeled PC vesicles (labeled with 6% Texas Red fluorophore (TR) and encapsulated carboxy fluorescein (CF)) to glass surfaces was studied by contact mode atomic force microscopy in aqueous buffer. These studies were performed in part to unravel details of the previously observed isolated rupture of dye-labeled PC vesicles on glass (Johnson, J. M.; Ha, T.; Chu, S.; Boxer, S. G. Biophys. J. 2002, 83, 3371-3379), specifically to differentiate partial rupture, that is, pore formation and leakage of entrapped dye, from full rupture to form bilayer disks. In addition, the adhesion potential of PC vesicles on glass was calculated based upon the adhesion-driven flattening of adsorbed vesicles and a newly developed theoretical model. The vesicles were found to flatten considerably upon adsorption to glass (width-to-height ratio of approximately 5), which leads to an estimate for the adhesion potential and for the critical rupture radius of 1.5 x 10(-4) J/m2 and 250 nm, respectively. Independent of vesicle size and loading with dye molecules, the adsorption of intact vesicles was observed at all concentrations below a threshold concentration, above which the formation of smooth lipid bilayers occurred. In conjunction with previous work (Johnson, J. M.; Ha, T.; Chu, S.; Boxer, S. G. Biophys. J. 2002, 83, 3371-3379), these data show that 6% TR 20 mM CF vesicles adsorb to the surface intact but undergo partial rupture in which they exchange content with the external buffer.     

Stille Cross‐Coupling of a Racemic Planar‐Chiral Ferrocene and Crystallographic Trace Analysis of Catalysis Intermediates and By‐products

A pressure‐controlled procedure for the S_N1 reaction of rac‐1‐[(dimethylamino)methyl]‐2‐(tributylstannyl)ferrocene ( 1 ) to rac‐1‐(phthalimidomethyl)‐2‐(tributylstannyl)ferrocene ( 2 ) was developed. Pd⁰‐Catalyzed Stille coupling of 2 with iodobenzene afforded rac‐1‐phenyl‐2‐(N‐phthalimidomethyl)ferrocene ( 5 ) in 74% yield; after trace enrichment by crystallization of the combined mother liquors, one single crystal of each, 5 , catalysis intermediate trans‐iodo(σ‐phenyl)bis(triphenylarsino)palladium(II) ( 7 ), trans‐diiodobis(triphenylarsino)palladium(II) ( 8 ), and rac‐2,2′‐bis(phthalimidomethyl)‐1,1′‐biferrocene ( 9 ) could be isolated by crystal sorting under a microscope and characterized by X‐ray crystal structure analysis. Furthermore, 5 was deprotected to amine ( 11 ), which does even survive the Birch reduction to rac‐1‐(aminomethyl)‐2‐(cyclohexa‐2,5‐dienyl)ferrocene ( 12 ).     

Laser desorption mass spectrometry on thin liquid jets

A recently developed soft desorption method for mass spectrometry is presented, which is called Laser Induced Liquid Beam Ionization/Desorption (LILBID). Analyte ions are desorbed from a thin jet of analyte solution directly into vacuum by means of an IR laser pulse, which has been tuned to a vibrational resonance of the solvent. A comparative experiment with ammonium chloride and aniline hydrochloride shows that ion formation via proton transfer takes place in the solution. Thermally unstable compounds, as well as supra- and biomolecular complexes, can be detected intact and mass analyzed in a reflectron time-of-flight (Re-TOF) mass spectrometer. During the desorption process, noncovalent interactions and some solvation characteristics are preserved. Three examples for the capacity of LILBID are given in this short overview: (a) ion-solvent interactions with the formation of a clathrate structure Cs⁺(H₂O)₂₀, (b) host-guest interactions with the K⁺ selectivity of valinomycin, and (c) noncovalent interactions with the dimerization of gramicidin. Received: 29 July 1997 / Revised: 4 September 1997 / Accepted: 12 September 1997     

Sulphur substituted organotin compounds : VII. Charge transfer interactions of arylthiomethyl(triphenyl)tin compounds with tetracyanoethylene

Thermolysis of η²-benzoyl(phenyl)zirconocene yields the η²-benzophenonzirconocene complex 2, isolated as a dimer. 2 exhibits an ambivalent reactivity pattern. The formation of five-membered metallacycles from 2 and olefinic hydrocarbons possibly proceeds analogous to reactions of “normal” metalolefin π-complexes. However, both reactions with the electron-deficient olefins dimethylfumarate and -maleate and the behavior towards electrophilic and protic reagents as well as aromatic hydrocarbons might be interpreted in terms of a metallaoxirane-character of 2.     

A novel stereospecific synthesis of (±)-leukotriene A4(LTA4), methyl ester

The reaction of the phosphate $\text{1}$ with the expoxyaldehyde $\text{2}$ is reported as the key step in a novel stereospecific synthesis of (±)-LTA₄, methyl ester $\text{3}$.     

Quantitative analysis of perchlorate in extracts of whole fish homogenates by ion chromatography: comparison of suppressed conductivity detection and electrospray ionization mass spectrometry

The perchlorate anion (ClO ₄ ^– ) is an anthropogenic contaminant of increasing concern in water supplies, and has been shown to disrupt thyroid activity. Most perchlorate analyses are currently carried out by ion chromatography (IC) with suppressed conductivity detection (SCD). While this procedure has been demonstrated to provide acceptable performance for analysis of water samples, the determination of perchlorate in high-conductivity aqueous extracts of plant or animal material is not readily accomplished by IC-SCD unless lengthy cleanup protocols are applied. With the addition of electrospray ionization mass spectrometry (ESI-MS) to IC, it was hypothesized that the interference imposed by various ionic species could be significantly reduced without the need for purification; however, the analysis of perchlorate in relatively unpurified extracts of biologically derived homogenates by IC-ESI-MS has not previously been described in the literature. The research presented here represents a comparison of the capabilities of IC-SCD and IC-ESI-MS to detect perchlorate in reagent water and in crude extracts of perchlorate-exposed fish (threespine stickleback, Gasterosteus aculeatus). ESI-MS was found to compare favorably to SCD for the detection of perchlorate in deionized water, and to exceed SCD performance in perchlorate analysis of fish-derived extracts.     

Electrode processes in the oxidation of tetrahydroisoquinoline derivatives

The electrochemical oxidation of the alkaloid laudanosine (Ia) to O-methylflavinantine (II) has been studied in acetonitrile solvent. Using cyclic voltammetry, rotating disc voltammetry and preparative electrolyses on several alkaloids, simple aliphatic amines and aromatic compounds, some aspects of the mechanism of this coupling reaction are elucidated. The first anodic wave for laudanosine at platinum has E_p=0.55 V vs. Ag/Ag⁺. The electrode rapidly becomes partially passivated at potentials above 0.5 V. This is due to a film which “dissolves” below 0.5 V, at a rate independent of the potential. It is shown that the reaction (Ia)→(II) proceeds at 0.5 V by initial oxidation of the amine moiety. If acids such as sodium bicarbonate are added to the anolyte the amine is protonated causing the first wave to disappear. Oxidation at 1.1 V under these acidic conditions produces the same product, but more rapidly and in significantly higher yield because electrode filming and side reactions resulting from the amine oxidation are abrogated.